Краткое содержание страницы № 1
CASSETTE RECEIVER KS-FX555
RADIO KASET KS-FX555
SUZUKI PREMIUM SOUND SYSTEM
INSTRUCTIONS
BUKU PETUNJUK
GET0241-001B
[UN]
Cover001AKS-FX555[UN]ff.p65 3 6/17/04, 9:59 AM
INDONESIA ENGLISH
Краткое содержание страницы № 2
How to reset your unit While holding SEL (select), press (standby/on/attenuator) for more than 2 seconds. This will reset the built-in microcomputer. (standby/on/attenuator) SEL (select) Note: Your preset adjustments—such as preset channels or sound adjustments—will also be erased. How to use the MODE button If you press MODE, the unit goes into functions mode, then the number buttons and ¢/ 4 buttons work as different function buttons. Ex.: When number button 2 works as MO (monaural) button
Краткое содержание страницы № 3
CONTENTS How to reset your unit ............................... 2 OTHER MAIN FUNCTIONS ................ 15 How to use the MODE button ................... 2 Selecting the level meter—LEVEL ............ 15 Selecting the external component to use LOCATION OF THE BUTTONS ............ 4 —EXT IN ................................................ 15 Control panel............................................. 4 Detaching the control panel ...................... 16 BASIC OPERATIONS ....................... 5
Краткое содержание страницы № 4
z LOCATION OF THE BUTTONS Control panel Display window ; a sd f g hj k l / 23 4 5 68 7 9 1 p q w e rty uio Display window 1 (standby/on/attenuator) button 2 LOUD (loudness) button ; FM band indicators 3 SEL (select) button FM1, FM2, FM3 4 Display window a AM band indicator 5 Cassette compartment s TAPE indicator 60 (eject) button d MP3 indicator 7 FM/AM button • Lights up only when playing an MP3 disc on a 8 TAPE 23 button JVC MP3-compatible CD changer. 9 ¢/4 buttons f Main display • Also funct
Краткое содержание страницы № 5
BASIC OPERATIONS 1 3 2 Turning on the power 3 Adjust the volume. 1 Turn on the power. To increase the volume To decrease the volume Note on One-Touch Operation: When you select a source in step 2 below, the Volume (or audio) level indicator power automatically comes on. You do not have (see page 15) to press this button to turn on the power. 2 Select the source. Volume level appears. 4 Adjust the sound as you want. (See pages 13 and 14.) To operate the tuner (FM or AM), To drop the volume in a m
Краткое содержание страницы № 6
Setting the clock 4 Finish the setting. 1 Press and hold SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M,” “LEVEL,” “B. SKIP,” or “EXT IN” appears on the display. To check the current clock time or change the display mode Press DISP (display) repeatedly. Each time you press the button, the display mode changes as follows: 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown on • During tuner operation: the display. Frequency Clock 2 Adjust the hour. 12 • During tape operation: Play m
Краткое содержание страницы № 7
RADIO OPERATIONS To stop searching before a station is Listening to the radio received, press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching for a station manually: Searching for a station automatically: Manual search Auto search 1 Select the band (FM1 – 3, AM). 1 Select the band (FM1 – 3, AM). FM1 FM2 FM3 AM FM1 FM2 FM3 AM Note: Selected band appears. This receiver has three FM bands (FM1,
Краткое содержание страницы № 8
3 Tune in to a station you want while Storing stations in memory “M” (manual) is still flashing. You can use one of the following two methods to store broadcasting stations in memory. To tune in to stations of higher • Automatic preset of FM stations: SSM (Strong- frequencies station Sequential Memory) • Manual preset of both FM and AM stations To tune in to stations of lower frequencies FM station automatic preset: SSM • If you release your finger from the button, You can preset 6 local FM stat
Краткое содержание страницы № 9
Notes: Manual preset • A previously preset station is erased when a new You can preset up to 6 stations in each band station is stored in the same preset number. (FM1, FM2, FM3, and AM) manually. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, Ex.: Storing FM station of 92.5 MHz into the during battery replacement). If this occurs, preset preset number 1 of the FM1 band. the stations again. 1 Select the band (FM1 – 3, AM) you want to store st
Краткое содержание страницы № 10
TAPE OPERATIONS To stop play and eject the cassette Listening to a cassette Press 0. You can play back type I (normal) tapes. Tape play stops and the cassette automatically ejects from the cassette compartment. The source changes to the previously selected one. 1 Insert a cassette into the cassette If you change the source, tape play also stops compartment. (without ejecting the cassette this time). The unit turns on and tape • You can also eject the cassette by pressing 0 play starts automatica
Краткое содержание страницы № 11
Finding the beginning of a tune Other convenient tape functions Multi Music Scan (MMS) allows you to Skipping the blank portions on the tape automatically start playback from the beginning You can skip blank portions between the tunes of a specified tune. You can specify up to 9 tunes (Blank Skip). ahead of or before the current tune. When this function is turned on, the unit fast- forwards (skipping blank portions of 15 seconds During playback or more), to the next tune and starts playback. Spe
Краткое содержание страницы № 12
Playing the current tune repeatedly Prohibiting cassette ejection You can play the current tune repeatedly You can prohibit cassette ejection and lock a (Repeat Play). cassette in the cassette compartment. 1 Press MODE to enter the While pressing TAPE 23, press and functions mode while playing a hold 0 (eject) for more than 2 seconds. tune you want to hear over again on a cassette. 2 Press RPT (repeat), while still in the functions mode, so that “REPEAT” appears on the “NO EJECT” flashes on the
Краткое содержание страницы № 13
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level. You can adjust the sound characteristics to your To increase the level preference. 1 Select the item you want to adjust. To decrease the level Each time you press the button, the adjustable items change as follows: TRE FAD BAS (bass) (treble) (fader) Tone level indicator changes as you VOL BAL adjust the bass or treble. (volume) (balance) Ex.: When you adjust “TRE” (treble) Indication To do: Range BAS Adjust the bass. –06 (min.) 3 Repeat
Краткое содержание страницы № 14
Selecting preset sound modes 1 Call up the sound mode you want to adjust. You can select a preset sound adjustment • See left column for details. suitable to the music genre. Select the sound mode you want. Each time you press the button, the sound mode changes as 2 To adjust the bass or treble level follows: 1 Select “BAS” (bass) or “TRE” (treble). SCM OFF BEAT SOFT POP 2 Adjust the level. Ex.: When you select “BEAT” Indication For: Preset values BAS TRE LOUD SCM OFF (Flat sound) 00 00 OFF BEAT
Краткое содержание страницы № 15
OTHER MAIN FUNCTIONS Selecting the level meter Selecting the external —LEVEL component to use—EXT IN You can select the level meter display according You can connect the external component to the to your preference. CD changer jack on the rear using the Line Input When shipped from the factory, “AUDIO 2” is Adapter KS-U57 (not supplied). selected. To use the external component as the playback source through this unit, you need to select 1 Press and hold SEL (select) for more which component—CD c
Краткое содержание страницы № 16
Attaching the control panel Detaching the control panel 1 Insert the left side of the control You can detach the control panel when leaving the car. panel into the groove on the panel When detaching or attaching the control panel, holder. be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Press the right side of the control pa
Краткое содержание страницы № 17
Hierarchy CD CHANGER OPERATIONS We recommend that you use the JVC MP3- How are MP3 files recorded? compatible CD changer with your unit. MP3 files can be recorded in “folders.” During recording, the files and folders can be By using this CD changer, you can play back arranged in a way similar to arranging files and your original CD-Rs (Recordable) and CD-RWs folders of computer data. (Rewritable) recorded either in audio CD format “Root” is similar to the root of a tree. Every file or in MP3 for
Краткое содержание страницы № 18
Connecting the CD changer 3 Re-install this receiver to your car using the screws removed in step 1. Before connecting the CD changer • For JVC CD changer installation, refer to • To prevent short circuits, it is recommended to the instructions supplied for JVC CD disconnect the car battery’s negative terminal changer. and make all electrical connections before connecting the CD changer. • When mounting the unit removed from your Playing discs car, be sure to use the screws provided, as instruct
Краткое содержание страницы № 19
• When the current disc is a CD: To fast-forward or reverse the track/file Playback starts from the first track of the current disc. Press and hold ¢, during play, to fast-forward the track/file. Press and hold 4 , during play, to reverse the track/file. To skip to the next or previous tracks/files Selected Current track disc number number Press ¢ briefly during play, to skip ahead to the beginning of the next track/file. Each time you press the button Clock time Current track consecutively, t
Краткое содержание страницы № 20
To play back tracks/files repeatedly Selecting the playback modes (Track Repeat/Disc Repeat Play) To play back tracks/files at random 1 Press MODE to enter the functions mode during play. (Disc Random/Magazine Random Play) 1 Press MODE to enter the functions mode during play. 2 Press RPT (repeat), while still in the functions mode, so that “TRK RPT” or “DISC RPT” 2 Press RND (random), while still appears on the display. in the functions mode, so that Each time you press the button, “DISC RND” or
