Краткое содержание страницы № 1
CD RECEIVER KD-SH1000
RECEPTOR CON CD KD-SH1000
RECEPTEUR CD KD-SH1000
For canceling the display demonstration, see page 8
Para cancelar la demostración en pantalla, consulte la página 8
Pour annuler la démonstration des affichages, référez-vous à la page 8
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter below the Model
Pour l’installation et les raccordements, se référer au manuel sép
Краткое содержание страницы № 2
Warning: INFORMATION (For U.S.A.) This equipment has been tested and found If you need to operate the unit while driving, to comply with the limits for a Class B digital be sure to look ahead carefully or you may be device, pursuant to Part 15 of the FCC involved in a traffic accident. Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Notice: This equipment generates, uses, and can radiate radio frequency energy an
Краткое содержание страницы № 3
Thank you for purchasing a JVC product. Please read all instructions carefully CONTENTS before operation, to ensure your complete understanding and to obtain the best possible Control panel ................................... 5 performance from the unit. Remote controller — RM-RK300 ............ 6 How to read this manual Getting started ................................. 7 • Button operations are mainly explained with Basic operations ............................................... 7 the il
Краткое содержание страницы № 4
How to detach/attach the control How to enter the various menus panel The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). Detaching... • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. Time countdown indicator Attaching... 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly. How to change the control panel 4 Operate as instructed on the screen. angle • To go
Краткое содержание страницы № 5
How to change the display information and patterns Ex.: When tuner is selected as the source Source operation display Clock time display Large graphic display (full display size) Small graphic display Control panel Parts identification 1 BAND button 9 (angle) button 2 SOURCE button p 0 (eject) button 3 • Control dial q 4 /¢ buttons • POWER/ATT (attenuator)/ENTER w Remote sensor button DO NOT expose the remote sensor to strong 4 MENU button light (direct sunlight or artificial lighting). 5 5
Краткое содержание страницы № 6
Remote controller — RM-RK300 Installing the lithium coin battery Caution: (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is Main elements and features no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. • Store the battery in a place where children cannot reach to avoid risk of accident. • To prevent the battery from over-heating, cracking, or starting a fire: – Do no
Краткое содержание страницы № 7
• While listening to an Apple iPod or a ® Getting started JVC D. player: – Pauses/stops or resumes playback with ∞. – Enters the main menu with 5. Activates or deactivates crossover network (Now 5/∞/4/¢ work as the menu (see page 18) before turning on the power. selecting buttons.)* 4 VOL (volume) + / – buttons Basic operations Adjusts the volume level. 5 Number buttons ~ Turn on the power. • For FM/AM: Selects the preset station if pressed, or store a station if pressed and held. •
Краткое содержание страницы № 8
3 Finish the procedure. @ Adjust the sound as you want. (See pages 15 – 19.) To drop the volume in a moment (ATT) To restore the sound, press To check the current clock time while the it again. power is turned off To turn off the power Caution on volume setting: Discs produce very little noise compared Radio operations with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the ~ output level. Ÿ Basic settings • See also “Gene
Краткое содержание страницы № 9
When an FM stereo broadcast is hard Storing stations in memory to receive You can preset six stations for each band. 1 Enter the MODE menu (see page 4). FM station automatic presetting — 2 SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you 3 want to store into. 2 Enter the MODE menu (see page 4). 4 MO indicator lights up. Reception improves, but stereo 3 effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3. Th
Краткое содержание страницы № 10
4 Listening to a preset station 1 5 2 6 Select a preset number. When using the remote controller Directly select the preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... 10 EN10-15_SH1000J_001A_2.indd 10 EN10-15_SH1000J_001A_2.indd 10 1 1/20/06 3:00:43 PM /20/06 3:00:43 PM ENGLISH
Краткое содержание страницы № 11
Playing from an SD card Disc/SD card/USB memory Before detaching the control panel, turn off the operations power. ~ Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. SD loading slot Ÿ To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc. “Please Eject USB” flashes on the display. If this happens, detach the USB memory, then, press 0 button again. SD card Playing discs in t
Краткое содержание страницы № 12
Cautions: ! Attach the control panel. • Avoid using the SD card/USB memory when it might hinder your safety driving. • Make sure all important data have been backed up to avoid losing the data. If an SD card or USB memory has been ⁄ • The control panel goes attached... back to the previous position. Playback starts automatically if tracks are Playback starts from where it has been stopped recorded. previously. • If a different SD card or USB memory is currently attached, playback starts
Краткое содержание страницы № 13
To go to the next or previous tracks 4 Confirm the selection. The selected list appears on the display. • You can move to the other list by turning To go to the next or previous folders (only for the control dial. MP3/WMA/SD/USB) For MP3 tracks: 5 Select a disc/folder/file from the list. Current folder For WMA tracks: Ex.: When “Folder” is selected in step 3 Only for MP3/WMA/SD/USB: If you select the current disc/folder (highlighted on the screen), its Folder/File • Holding t
Краткое содержание страницы № 14
Prohibiting disc ejection Intro Plays the beginning 15 seconds of... You can lock a disc in the loading slot. Track : All tracks of the current playback media. [ ] 1 1 Folder* : First track of all folders of the current playback media. [ ] 2 Disc* : First track of all the inserted discs. [ ] 2 After making sure “No Eject?” is Off : Cancels. selected... Repeat Plays repeatedly • “No Eject” flashes, and the disc cannot be ejected. Track : The current track. [ ] 1 Folder* : All tracks of
Краткое содержание страницы № 15
To make more precise settings, see the following. Sound adjustments To cancel the acoustic effect, select “Defeat” in Selecting the DSP modes (DSP) step Ÿ. You can create a more acoustic sound field such Precise settings for the DSP modes as in a theater, hall, etc. • When crossover network (see page 18) is 1 Select a DSP mode. activated, the DSP mode is fixed to “Defeat.” 2 Select the number of the built-in DSP modes speakers. • For “Defeat” and “V.Cancel,” the speaker Defeat (No acoust
Краткое содержание страницы № 16
5 Select the distance between the 3 Finish the procedure. selected speaker and the seat. Using the equalizer—EQ Once you have set the distance, it is You can adjust the sound equalization patterns memorized for each seat position selected to your preference by using either Graphic EQ in step 3. The memorized setting is recalled or Parametric EQ. next time you select the seat position. • Adjust the equalizer to match the reproducible frequency range of the To change the measuring unit con
Краткое содержание страницы № 17
3 Select a band. Storing your own sound modes 1 Select a sound mode. Band1 : 20.0 Hz – 1.2 kHz 2 Select a frequency band. Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 3 Adjust the enhanced level for the selected frequency band. 5 Select the frequency. 4 Repeat steps 2 and 3 to adjust the other frequency bands. 5 • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other. (Only selectable frequencie
Краткое содержание страницы № 18
To cancel Crossover, repeat the same Activating crossover network procedure. Make sure that “X-Over Off OK?” appears on the display. By activating crossover network, you can • indicator goes off. allocate different frequency range of sound signals to different speakers to match their characteristic. Setting the sound modes—SEL If you have installed the 3-way network You can adjust the sound characteristics to your speaker system in the car, make sure of the preference. following: • Be
Краткое содержание страницы № 19
To adjust reproduced frequency To adjust subwoofer output— level—X-Over S.woofer This setting is available only when crossover 1 Adjust the output level. network (see page 18) is activated. 1 Select a filter. 2 Select a cut-off frequency according to the HPF : Frequencies lower than the connected subwoofer. (Front/Rear) selected level are cut-off. : Frequencies higher than the LPF (Rear) selected level are cut-off. 2 Select “On” to activate the selected filter. 3 Adjust the continuity of th
Краткое содержание страницы № 20
General settings — PSM You can change PSM (Preferred Setting Mode) 3 Select or adjust the selected PSM item. items (except “Sirius ID”) listed in the table that follows. 1 Enter the PSM menu (see page 4). 4 Repeat steps 2 and 3 to adjust the 2 Select a PSM item. other PSM items if necessary. 5 Finish the procedure. Indications Items Settings, [reference page] Demo • On [Initial] : Display demonstration will be activated automatically if no Display demonstration operation is done for about 20
