Краткое содержание страницы № 1
SSM
CD RECEIVER KD-LX100
RECEPTOR CON CD KD-LX100
RECEPTEUR CD KD-LX100
SCM MONO LOCAL INT RPT RND KD-LX100
SEL DISP MODE 78 9 10 11 12 SOURCE BBE BAND OFF
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
INSTRUCTIONS
Retain this in
Краткое содержание страницы № 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Краткое содержание страницы № 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS LOCATION OF THE BUTTONS ............ 4 OTHER MAIN FUNCTIONS ............... 17 Setting the clock ...................................... 17 Control panel ........................................... 4 Changing the general settings (PSM) ...... 17 Remote controller ..................................
Краткое содержание страницы № 4
LOCATION OF THE BUTTONS Control panel CD loading slot Display panel 2 1 3 u
4 5 6 7 8 9 p q w t y e r *The control panel slides out when you press ON/CLOSE. *When you press OFF/0 button, the display panel moves down and the CD loading slot appears. 1 Control dial 7 SCM (sound control memory) button 8 MONO button 2 ¢ / 4 button 9 LOCAL button • ¢ / 4 also functions as ON or p INT (intro) button CLOSE button. q RPT (repeat) button 3 Remote sensor w RND (random) button 4 SEL (select) button e S
Краткое содержание страницы № 5
3 • Functions as the PRESET button while Remote controller listening to the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. 5 • Functions as the DISC – button while listening 6 1 to the CD changer. Each time you press the button, the disc 2 number decreases, and the selected disc 7 starts playing. 3 4 Functions the same as the control dial on the main unit. NOTE: This button does not function for the 4 preferred setting mode adju
Краткое содержание страницы № 6
3. Return the battery holder. Preparing the remote controller Insert again the battery holder pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote (back side) sensor on the main unit. Make sure there is no obstacle in between. Remote sensor WARNING: KD-LX100 SOURCE BBE BAND OFF • Store the batteries in a place which children cannot reach. If a child accidentally swallows the batteries, • Do not expose the remote sensor
Краткое содержание страницы № 7
SSM BASIC OPERATIONS KD-LX100 SCM MONO LOCAL INT RPT RND KD-LX100 78 9 11 12 SOURCE BBE BAND OFF SEL DISP MODE 10 SOURCE BBE BAND OFF 1 3 2 3 Adjust the volume. 1 Turn on the power. The display illuminates and To increase the volume. the control panel and control dial come out. To decrease the volume. 2 Select the source. Each time you press the button, the source changes as follows: Volume level meter = Tuner (FM or AM) = CD* = CD changer or external component** 4 Adjust the sound as you want (
Краткое содержание страницы № 8
SSM RADIO BASIC OPERATIONS SCM MONO LOCAL INT RPT RND KD-LX100 78 9 10 11 12 SOURCE SEL DISP MODE BBE BAND OFF To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune into a particular station. To tune in FM stations only with strong signals 1 Press MODE. Searching a station automatically: “MODE” appears on the display, and the number Auto search buttons can wor
Краткое содержание страницы № 9
2 Press and hold ¢ or 4 until Storing stations in memory “M” (manual) starts flashing on the You can use one of the following two methods to display. store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM 3 Tune into a station you want while “M” You can preset 6 local FM stations in each FM band is flashing. (FM1, FM2 and FM3). Press ¢ to tune into stations of
Краткое содержание страницы № 10
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band (FM1, numbers. FM2, FM3 and AM) manually. Ex: Storing an FM station of 88.3 MHz into the Notes: preset number 1 of the FM1 band • A previously preset station is erased when a new station is stored in the same preset number. 1 Select the band (FM1). • Preset stations are erased when the power supply to the 1 Press SOURCE to memory circuit is interrupted (for example, d
Краткое содержание страницы № 11
SSM CD OPERATIONS SCM MONO LOCAL INT RPT RND KD-LX100 78 9 10 11 12 SOURCE OFF SEL DISP MODE BBE BAND Notes: Playing a CD • When a CD is in the loading slot, selecting “CD” as the source by pressing SOURCE starts CD play. 1 Open the loading slot. • When a CD is inserted upside down, the CD automatically ejects. (“CD EJECT” appears on the display.) • When you play a CD Text, the disc title and performer appear on the display. Then the current track title appears on the display, followed by the tr
Краткое содержание страницы № 12
Locating a track or a Selecting CD playback modes particular portion on a CD To play back tracks at random (Random Play) To fast-forward or reverse the track You can play back all tracks on the CD at Press and hold ¢, while random. playing a CD, to fast-forward the track. 1 Press MODE while playing a CD. Press and hold 4 , while “MODE” appears on the lower part of the playing a CD, to reverse the display, and the number buttons can work as track. different function buttons. 2 Press RND (Rand
Краткое содержание страницы № 13
Playing a CD Text To play back only intros (Intro Scan) You can play back the first 15 seconds of each In a CD Text, some information about the disc (its track sequentially. disc title, performer and track title) is recorded. You can show these disc information on the 1 Press MODE while playing a CD. display. “MODE” appears on the lower part of the display, and the number buttons can work as different function buttons. Select text display mode while playing a 2 Press INT (Intro), while “MODE” is
Краткое содержание страницы № 14
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level. To increase the level. You can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. To decrease the level. Each time you press the button, the adjustable items change as follows: BASS TREBLE FADER Equalization pattern changes as you adjust VOLUME BAL the bass or treble. (balance) Note: Normally the control dial works for volume Indication To do: Range adjustment. So you do not have to select “VOLUME”
Краткое содержание страницы № 15
II Turning on/off the BBE Using the sound control function memory II The BBE * function restores the brilliance and clarity You can select and store a preset sound of the original live sound in recording, broadcasts, adjustment suitable for each playback source. etc. (Advanced SCM) When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing high- Selecting and storing the sound frequency sounds to take longer to reach the ear modes II than low frequency sounds. The
Краткое содержание страницы № 16
Indication For: Preset values 1 Press MODE. II Bass Treble BBE The number buttons can work as SCM BEAT Rock or disco +02 00 2 different function buttons. music SCM SOFT Quiet +01 –03 OFF background music 2 Select the sound mode you want. For details, see page 15. SCM POP Light music +04 +01 OFF SCM OFF (Flat sound) 00 00 2 3 1 Select the item you want to adjust Recalling the sound modes (bass or treble). When “SCM LINK” is set to “LINK ON,” 2 Adjust the selected item. select the source. 1 2 The
Краткое содержание страницы № 17
OTHER MAIN FUNCTIONS Changing the general settings Setting the clock (PSM) 1 Press and hold SEL (select) for You can change the items listed on the next page more than 2 seconds so that one of by using the PSM (Preferred Setting Mode) control. the PSM items appears on the display. (See page 18.) Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 18.) 2 Set the hour. 1Select “CLOCK HOUR” if not shown on the display.
Краткое содержание страницы № 18
Preferred Setting Mode (PSM) items 3 1 2 Factory-preset See Set. settings page Hold. Select. Counter- clockwise Clockwise CLOCK HOUR Hour adjustment Back Advance 1:00 17 CLOCK MIN Minute adjustment Back Advance SCM LINK Sound control LINK ON 19 LINK OFF LINK ON memory linkage CLOCK OFF CLOCK ON CLOCK DISP Clock display CLOCK ON 19 LEVEL Level display 4 types (see page 19) NORMAL 19 AUTO OFF DIMMER Dimmer mode AUTO 19 ON CRUISE 1 CRUISE 2 CRUISE Audio cruise 20 CRUISE OFF CRUISE OFF — 800 rpm
Краткое содержание страницы № 19
To cancel Advanced SCM — SCM LINK To turn on/off the key-touch tone — BEEP SW You can cancel the Advanced SCM (Sound You can deactivate the key-touch tone if you do Control Memory), and unlink the sound modes not want it to beep each time you press a button. and the playback sources. When shipped from the factory, the key-touch When shipped from the factory, a different sound tone is activated. mode can be stored in memory for each source • BEEP ON: Activates the key-touch tone. so that you can
Краткое содержание страницы № 20
To select the external component to use Controlling the volume — EXT INPUT automatically (Audio Cruise) You can connect the external component to the CD changer jack on the rear using the Line Input You can select the proper cruise mode for your Adaptor KS-U57 (not supplied). car. To use the external component as the playback This unit changes the volume level automatically source through this unit, you need to select (at 3 possible levels) based on the driving speed which component — CD changer
