Краткое содержание страницы № 1
R
DVI-9990
DVD-Audio/Video Tuner
Guide for Installation and Connections English
Guide d’installation et de connexions Français
Guía de instalación y conexiones
Español
Español
Italiano
Svenska
Краткое содержание страницы № 2
R ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave., Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Phone 03-9769-000
Краткое содержание страницы № 3
PRECAUTIONS GUIDE FOR INSTALLATION AND CONNECTIONS • Please read this GUIDE FOR INSTALLATION AND CONNECTIONS and the OWNER’S MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hope that your new DVI-9990 will give you many years of listening enjoyment. In case of problems when installing your unit, please contact your authorized ALPINE dealer. Points to Observe for Safe Usage • Read this manual carefully before starting operation and use this system safely. We
Краткое содержание страницы № 4
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire. DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground conn
Краткое содержание страницы № 5
Contents PRECAUTIONS 2 Accessories 5 Installation 6 Connections 9 Connections with other equipments 10 • To use this unit, a Multimedia Manager (PXI-H990, sold separately) or DAC unit (DAI-C990, sold separately) is required. This unit is powered by connecting with the PXI-H990 or DAI- C990. IMPORTANT Please record the serial number of your unit in the space provided below and keep it as a perma- nent record. The serial number plate is located on the bottom of the unit. SERIAL NUMBER: INSTALLATIO
Краткое содержание страницы № 6
Accessories Power cable RCA Extension S video cable Flat screw Front frame cable (video) (M5 x 6) x 4 Parts for remote control Remote control Battery (AAA) Reinforcement screw Remote control holder (M3 x 12) x 2 Double-sided adhesive tape 5-EN
Краткое содержание страницы № 7
Installation Installation Location Before deciding on the mounting location, check that opening and closing the display will not hamper gear shifting in that position. • Install at an angle of within 35 degrees from the horizontal. 1 Mounting Sleeve (Included) Dashboard DVI-9990 Remove the Detachable Front Panel (refer to page 9 of Owner’s Manual). Remove the front frame from main unit (see “Removal” on page 7). Slide the mounting sleeve into the dashboard. 2 Hex Nut (M5) Screw Bolt Stud Meta
Краткое содержание страницы № 8
3 Slide the DVI-9990 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel. Lock Pin Removal 1 Remove the DETACHABLE FRONT PANEL. 2 Use a small screwdriver (or similar tool) to push the locking
Краткое содержание страницы № 9
Mounting the remote control holder • If the remote control is in direct sunlight, remove it from the holder and keep it in the glove box. • When the holder cannot be mounted securely with Velcro tape, mount it by using screws. Reinforcement Screws Remote Control Remote Control Holder Protective paper Console Box etc. 8-EN
Краткое содержание страницы № 10
Connections • Basic Connection Cable Color Cable Specifications • Video output connector Yellow Outputs a video signal. Connects to the video input of the TV monitor you are linking with. • There is a copy protect signal included in the video output signal, so that recording with a VCR (Video Cassette Recorder) etc., is not possible. Also, depending on the monitor, the picture may not be displayed correctly. • IONBUS terminal Connects with IONBUS compatible products. • S video output terminal Ou
Краткое содержание страницы № 11
Connections with other equipments • System Connection Connectable system products IONBUS compatible monitor TMI-M990 Multimedia Manager or DAC unit PXI-H990 or DAI-C990 Ai-NET/IONBUS converter KCI-500B System switch Ai-NET compatible changer CHA-S634 or CHA-1214 “1 (SYSTEM)” TUA-T021XM or TUA-T020XM XM Radio Receiver selected IONBUS DVD Audio Link cable compatible (Included with the PXI-H990 or DAI-C990) monitor (TMI-M990) To DVD Audio Link * (sold separately) System switch (PXI-H990
Краткое содержание страницы № 12
• System Connection Connectable system products Multimedia Manager or DAC unit PXI-H990 or DAI-C990 IONBUS incompatible External TV monitor TV monitor RCA Extension cable (video) (Included) Video output connector External TV monitor Yellow (sold separately) To DVD Audio Link DVD Audio Link cable terminal (Included with the PXI-H990 or DAI-C990) System switch Multimedia Manager • Set to SINGLE when PXI-H990 connecting one PXI-H990. or IONBUS cable DAC unit (Included with the PXI-H990
