Краткое содержание страницы № 1
Use & Care Guide
Installation Instructions
Vent Hood
316495008 - 09/2007
Краткое содержание страницы № 2
Finding Information 2 Please read and save this guide Thank you for choosing Electrolux, the new premium brand in home appliances. This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance. We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you, please use this page to record important product information. Keep a record for quick reference Purchase date Electrolux
Краткое содержание страницы № 3
Safety 3 Important Safety Instructions Read all instructions before using this appliance. Save these instructions for future reference. Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION based on the risk type. This symbol alerts you to situations that may cause serious body harm, death or property damage. This symbol alerts you to situations that may cause bodily
Краткое содержание страницы № 4
Safety 4 6. Your hood motor has a thermal overload which will automatically shut off the motor if it becomes over- heated. The motor will restart when it cools down. If the motor continues to shut off and restart, have TO REDUCE THE RISK OF INJURY TO PERSONS the hood serviced. IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:* 7. For best capture of cooking impurities, the bottom of the hood should be a minimum of 24" and a 1. SMOTHER FLAMES with a close-fitting lid, cookie maximum
Краткое содержание страницы № 5
Verify package contents 5 Unpack hood and check contents. You should receive: 1 - Hood 1 - Decorative Flue Assembly 1 - Support Frame 1 - Parts Bag containing: 1 - Support Frame Bracket 1 - Discharge Collar 4 - Mounting Screws (6 x 70) 16 - Mounting Screws (3,9 x 9,5mm Pan Head) 4 - Washers D.6.4mm 6 - Serrated Washers 1 - Wiring Box Cover 1 - Wire Clamp 1 - Installation Instructions 1 - Warranty Card WIRE CLAMP WIRING BOX COVER 4 WASHERS D.6.4mm SUPPORT 4 MOUNTING DECORATIVE FRAME SCREWS (6 x F
Краткое содержание страницы № 6
Installation 6 Install the ductwork ROOF CAP ROUND To reduce the risk of fire, use only metal DUCT ductwork. 1. Decide where the ductwork will run between the hood and the outside. DECORA- ROUND TIVE ELBOW FLUE EAVE VENT 2. A straight, short duct run will allow the hood to perform most efficiently. HOOD 6” ADAPTER 24” TO 30” ABOVE COOKING SURFACE 3. Long duct runs, elbows, and transitions will reduce the performance of the hood. Use as few of them as possible. Larger ducting may be required for
Краткое содержание страницы № 7
Installation 7 Install support system 1. At hood location, install 2 X 4 cross framing between DRYWALL CROSS FRAMING ceiling joists using dimensions shown. 15 5 /16” 2. Finish the ceiling surface. Be sure to mark the location of the ceiling joists and cross framing. 3. Secure the support frame bracket to joists and cross framing with four screws provided (6x70mm) and four CEILING JOISTS washers (D. 6.4mm). Make sure screws are driven into center of joists and framing for maximum strength. 4. Fix
Краткое содержание страницы № 8
Installation 8 recirculation plenum. Fig.6. Prepare the hood 4. Mount the 6”/5” adapter above hood. Fig. 7. NON-DUCTED RECIRCULATION PLENUM NOTE On stainless steel hoods, carefully remove the plastic protective film from all exterior surfaces of the hood and decorative flues, prior to final installation. Fix the electrical mounting plate with (2) 3.9x9.5mm screws and (2) serrated washers. Fig. 3. FRONT ELECTRICAL MOUNTING MOUNTING PLATE SCREWS (3.9x9.5mm) FIG. 5 FIG. 3 DUCT DUCTED CONFIGURATION
Краткое содержание страницы № 9
Installation 9 Connect decorative flue Install the hood 1. Secure the upper flue to the upper support frame with the mounting screws (3.9x9.5mm). Fig. 8. NOTE 2. Insert the lower flue moving it completely towards the top and fix it temporarily with a tape. Fig. 9. At least three people will be required to mount the hood. MOUNTING SCREWS (3.9x9.5mm) Fix the hood to the support frame with (6) 3.9x9.5mm mounting screws and (2) serrated washers (Fig. 10). MOUNTING SCREWS (3.9x9.5mm) SERRATED WASHERS
Краткое содержание страницы № 10
Installation 10 Connect ductwork Install filters (DUCTED AND NON-DUCTED HOODS) (DUCTED HOODS ONLY) 1. To remove the GREASE filters, pull the metal latch 1. Use 6" round metal duct to connect the discharge tab outside and unlock the filter. collar on the hood to the ductwork above (Fig. 11). 2. To install the GREASE filters, align rear filter tabs 2. Use duct tape to make all joints secure and air tight. with slots in the hood. Depress the metal latch tab, 3. Remove the tape from the lower flue
Краткое содержание страницы № 11
Maintenance 11 Proper maintenance of the Range Hood will assure proper performance of the unit. Grease filters Hood cleaning Stainless steel is one of the easiest materials to keep The grease filters should be cleaned when the filter clean. Occasional care will help preserve its fine reset switch will be illuminated. appearance. Use a warm detergent solution. Grease filters are dishwasher safe. Cleaning tips: Hot water with soap or detergent is all that is usu- See “INSTALL FILTERS” section fo
Краткое содержание страницы № 12
Operation 12 Controls display light filter fan fan speed delay switch reset on/off switches shut switch switches off Dead-front mode Push this switch once to turn the timer Off. Filter reset switch When the filter switch is illuminated, it is necessary to clean the GREASE FILTERS. Once the grease filters are cleaned and installed, press in and hold the “filter Stand-by mode reset switch” for approximately 3 seconds. When the filter switch is illuminated and blink, it is necessary to replace the
Краткое содержание страницы № 13
Operation 13 Halogen bulbs Fuse replacement This range hood requires four halogen bulbs (max 20W, 12V, Type T3 bulb, G4 Base). Halogen Bulb Key : 5304454951 SWITCH OFF THE ELECTRICITY SUPPLY. Remove the grease filters. Open the fuse box. ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY BEFORE CARRYING OUT ANY OPERATIONS ON THE Replace with the same type of fuse (5x20mm, 4A, 125V). APPLIANCE. Fuse Key : 5304455332 To change bulbs: 1. Open the cover by prying from the proper slots. - DO NOT ROTATE. CAUTIO
Краткое содержание страницы № 14
Wiring 14 This range hood must be properly grounded. Improper grounding can result in a risk of electric shock. The unit should be installed by a qualified electrician in accordance with all applicable national and local electrical codes. Turn off electrical power at service entrance before wiring. 1. Remove the (2) screws of the upper flue and move the upper flue towards the bottom. 2. Feed 6” of power cable through the top opening of the support frame bracket (installed on ceiling) and into th
Краткое содержание страницы № 15
Warranty Information 15 In the U.S.A., your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated Industries, Inc. We authorize no person to change or add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed by us or authorized Electrolux Home Products North America servicer. In Canada, our appliance is warranted by Electrolux Canada Corp. WARRANTY THROUGH OUR AUTHORIZED SERVICERS,
Краткое содержание страницы № 16
04307839/2S
