Краткое содержание страницы № 1
HD DIGITAL VIDEOCASSETTE PLAYER
HDW-M2100
HDW-M2100P
[English]
OPERATION MANUAL
1st Edition (Revised 5)
Краткое содержание страницы № 2
This symbol is intended to alert the user to WARNING the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. To prevent fire or shock hazard, do not expose the unit to rain or moisture. For the customers in the U.S.A. To avoid electrical shock, do not open This equipment has been tested and found to comply with the cabinet. Refer servicing to qualified the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules
Краткое содержание страницы № 3
WARNING: THIS WARNING IS APPLICABLE FOR Pour les clients européens OTHER COUNTRIES. Ce produit portant la marque CE est conforme à la fois à la Directive sur la compatibilité électromagnétique (EMC) (89/ 1.Use the approved Power Cord (3-core mains)/Appliance 336/CEE) et à la Directive sur les basses tensions (73/23/ Connector/Plug with earthing-contacts that conforms to CEE) émises par la Commission de la Communauté the safety regulations of each country if applicable. européenne. 2. Use the Pow
Краткое содержание страницы № 4
Table of Contents 1-1 Features ........................................................................................... 1-1 Chapter 1 1-2 Example System Configuration .................................................... 1-3 Overview 2-1 Control Panels ................................................................................ 2-1 Chapter 2 2-1-1 Upper Control Panel .............................................................. 2-2 Location and Function of 2-1-2 Lower Control Panel ......
Краткое содержание страницы № 5
Table of Contents 7-1 Overview of UMID Functions ....................................................... 7-1 Chapter 7 7-2 UMID Output and Display ............................................................ 7-2 UMID Functions 7-2-1 UMID Output Settings........................................................... 7-2 7-2-2 UMID Display ....................................................................... 7-2 8-1 Overview .......................................................................
Краткое содержание страницы № 6
Chapter 1 Overview Chapter 1 Overview 1-1 Features The HDW-M2100/M2100P is a high-definition (HD) High-precision digital signal processing digital videocassette player based on the HDCAM and range of interfaces format. This unit uses large scale integrated circuits for signal The digital signal processing uses HD 4:2:2 processing, and has a simple internal construction, component video signals complying with SMPTE allowing it to provide functionality at least equivalent 292M, which are converted
Краткое содержание страницы № 7
Chapter 1 Overview 1-1 Features Basic operation buttons and jog/shuttle Downward converter function dial The unit has an HD-to-SD downward converter function, and can output standard definition SDI, The basic buttons and jog/shuttle dial for VTR and analog component and analog composite signals even editing operations are provided in the conventional while playing back an HDCAM format tape. VTR layout, ensuring continuity with conventional operating panels. Upward converter function Time data di
Краткое содержание страницы № 8
Chapter 1 Overview 1-2 Example System Configuration The following conceptual diagram shows an example of use. BVE-series editor Tape control SDTI (optional) Audio/video HDSDI server system Digital cassette HDW-M2100/M2100P HDSDI/Analog SDTI (optional) composite HDSDI Video monitor HD VTR Analog composite/component Analog audio SDI Audio monitor SD VTR or analog VTR Chapter 1 Overview 1-3
Краткое содержание страницы № 9
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-1 Control Panels There are three control panels, as follows: •Upper control panel • Lower control panel •Switch panel Z Upper control panel (see page 2-2) 59.94 CTL/TCMENU TC Lower control panel (see page 2-3) CONTROL PANEL Switch panel (access by opening the lower control panel) (see page 2-11) KEY INHI PANEL SEL ON OFF REAR FRONT Lower control panel unlock buttons. Push in to open the lower control panel. Chapt
Краткое содержание страницы № 10
Chapter 2 Location and Function of Parts 2-1 Control Panels 2-1-1 Upper Control Panel 1 POWER switch 2 REMOTE buttons and RS-232C indicator 3 EJECT button Cassette compartment 4 Format indicators BETACAM/SP BETACAM SX MPEG IMX Digital BETACAM HDCAM REMOTE POWER EJECT 1(9P) 2(50P) RS-232C Z PHONES 5 PHONES jack and control 1 POWER switch 4 Format indicators Pressing the ‘ ) ’ side of the switch powers the unit on. The indicator (BETACAM/SP, BETACAM SX, When the unit is powered on, the audio sett
Краткое содержание страницы № 11
Chapter 2 Location and Function of Parts 2-1-2 Lower Control Panel 4 Time data/menu display section (see page 2-6) 2 CHANNEL CONDITION indicator (see page 2-5) 5 MULTI CONTROL knob and PUSH/ SHIFT indicator (see page 2-7) 3 Menu control buttons (see page 2-5) 1 Audio control section 6 RESET button (see page 2-7) (see page 2-4) 59.94 CTL/TCMENU TC 7 Search control section (see page 2-7) 8 Tape transport control section (see page 2-9) 9 ALARM indicator and KEY INHI indicator (see page 2-9) 59.94
Краткое содержание страницы № 12
Chapter 2 Location and Function of Parts 2-1 Control Panels 2 Audio setting display section 1 Audio control section DATA indicator DATA 1 DISPLAY FULL/FINE button 2 Audio setting display section dB OVER dB 20 0 OVER indicator 2 -10 10 1 -20 0 Level meter -1 -30 -10 -20 -40 -2 -40 -60 L EMPH R Monitor channel L and R indicators 3 Audio monitor signal selection EMPH indicator buttons 4 PB controls DATA indicator: Lights when the audio signals are recognized as data signals. OVER indicator: While
Краткое содержание страницы № 13
Chapter 2 Location and Function of Parts 3 Audio monitor signal selection buttons (CH1 to 3 Menu control buttons CH4, and CUE) The buttons in the upper and lower rows select tracks These buttons are used for function menu (see the to be output to the MONITOR OUTPUT L and R following section “Overview of the function menu”) connectors on the connector panel or the PHONES and setup menu (see Chapter 9) operations. The page jack on the upper control panel. The buttons in the buttons (V, v, and HOM
Краткое содержание страницы № 14
Chapter 2 Location and Function of Parts 2-1 Control Panels Time data type indicator 4 Time data/menu display section This indicates the type of data displayed in the time data display area 1. 1 Time data display LTC (longitudinal time code): Time code recorded on a longitudinal track on the tape 59.94 LUB: LTC user bit values VITC (vertical interval time code): Time code recorded in the vertical blanking interval 1 CTL/TCMENU TC VIUB: VITC user bit value DF (drop-frame) indicator (for 59.94i,
Краткое содержание страницы № 15
Chapter 2 Location and Function of Parts FORWARD VAR DOLBY NR indicator 5 MULTI CONTROL knob and PUSH/ 1) This lights when the Dolby noise-reduction circuit is SHIFT indicator functioning. In function menu operations, rotate the MULTI Speed indication area CONTROL knob to change settings that flash in the This indicates the speed of a DMC playback. menu display section. In setup menu operations, rotate During a DMC playback, “DMC SPD” is displayed in this knob to select menu items. time data d
Краткое содержание страницы № 16
Chapter 2 Location and Function of Parts 2-1 Control Panels Playback modes using the search dial 2 JOG button To use the search dial for playback in jog mode, press Playback mode Operations and functions this button, turning it on. Shuttle Press the SHUTTLE button or the search dial so that the SHUTTLE button lights, then turn the search dial. For details of playback in jog mode, see the description of Playback is carried out at a speed the search dial 5. determined by the position of the search
Краткое содержание страницы № 17
Chapter 2 Location and Function of Parts Fault display function 8 Tape transport control section The STOP button flashes in the following cases: •When setup menu item 105 is set to ON, there is no 1 PREROLL button external reference signal input. • The input external reference signal is different from the signal specified by setup menu item 337. PREROLL STANDBY 2 STANDBY button 4 F FWD (fast forward) button REW F FWD STOP PLAY To fast forward the tape, press this button, turning it on. 3 STOP b
Краткое содержание страницы № 18
Chapter 2 Location and Function of Parts 2-1 Control Panels 4 TRIM buttons q; Editing control section Use these buttons to trim an edit point to single-frame precision. Hold down the STUNT IN, STUNT OUT, PLAY IN, 1 DMC EDIT button or PLAY OUT button, and press one of these buttons. 2 MEMORY indicator The ‘+’ button advances the corresponding edit point by one frame, and the ‘–’ button sets it back by one 3 DELETE button frame. 4 TRIM buttons Pressing one of these buttons while holding down the
Краткое содержание страницы № 19
Chapter 2 Location and Function of Parts 7 LEARN button 1 LIST button After setting a speed variation start point (STUNT IN Use this button to read in and list shot marks. point) and a speed variation end point (STUNT OUT point), pressing this button makes the tape start 2 REC/ERASE indicator running. You can then use the search dial to vary the This lights in the state in which writing, amending, and tape speed, which is automatically stored in memory. deleting of shot marks is enabled and flas
Краткое содержание страницы № 20
Chapter 2 Location and Function of Parts 2-1 Control Panels 1 Memory card slot Insert a memory card to update this unit’s firmware. You can save or load setup menu settings onto the memory card. For details on firmware update and setup menu reading/ storing, refer to the Maintenance Manual Volume 1. 2 Memory card ejection button Press to eject a memory card from the memory card slot. 3 CONTROL PANEL connector (10-pin, round type) Plug in the lower control panel connection cable. 4 PANEL SELECT s
