Краткое содержание страницы № 1
WALK BEHIND SCRUBBER
Operating Instructions (ENG)
MODELS: SCE326
10052280
IPX4
Read these instructions before using the machine
AG
86037030 02/20/09
PRV NO. 980065
Краткое содержание страницы № 2
MACHINE DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ Copyright 2002 Windsor Industries, Printed in USA YOUR DEALER Name: ________________________________________________________________ Address: _____________________________________________________
Краткое содержание страницы № 3
TABLE OF CONTENTS Machine Data Log/Overview................................2 GROUP PARTS LIST Table of Contents.................................................3 Control Handle ................................................... 5-1 HOW TO USE THIS MANUAL Cover (Front) & Tank Mount .............................. 5-3 Cover (Top) & Tank Mount................................. 5-5 How to use this Manual........................................1-1 Decal ....................................
Краткое содержание страницы № 4
HOW TO USE THIS MANUAL This manual contains the following sections: The SAFETY section contains important information regarding hazard or unsafe practices of the - HOW TO USE THIS MANUAL machine. Levels of hazards are identified that could - SAFETY result in product or personal injury, or severe injury - OPERATIONS resulting in death. - MAINTENANCE - PARTS LIST The OPERATIONS section is to familiarize the operator with the operation and function of the The HOW TO USE THIS MANUAL s
Краткое содержание страницы № 5
IMPORTANT SAFETY INSTRUCTIONS When using an battery powered appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: ! WARNING: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments. If the machine is not working properly, has been dropped, damaged, left
Краткое содержание страницы № 6
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: ! WARNING WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death. ! CAUTION CAUTION - Hazards or unsafe practices which could re
Краткое содержание страницы № 7
SAFETY LABEL LOCATION NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. SAFETY DECAL 86252530 PRV NO. 81494 BATTERY CAUTION 86252520 PRV NO. 80885 SEE MANUAL CIRCUIT BREAKER DECAL PN 86243610 2% GRADE WARNING PRV NO. 500579 CUTTER 36V (SCE) 86037030 12/05/06 2-3
Краткое содержание страницы № 8
TECHNICAL SPECIFICATIONS ITEM DIMENSION/CAPACITY Nominal power 2160 W Rated Voltage 36 Volt DC Rated Amperage 60 amps Batteries 6 x 6 volt 250-305-335 AH @ 20 Hr rate Scrub Brush Motors 2 x .75 hp (.56 kW) Vacuum Motor 3 Stage .75 hp (.56 kW) Propelling Motor .75 hp (.56 kW) Mass (GVW) 1265 lb (574 kg) w/335 AH batteries Weight empty without batteries 433 lb (196 kg) Solution Control Gravity feed, fully variable with automatic shut- off in neutral Solution tank capacity 32 gal (118
Краткое содержание страницы № 9
TECHNICAL SPECIFICATIONS ITEM MEASURE Height 46 in (117 cm) Length with 32 in. (81 cm) scrub head 71 in (180) Width without squeegee and scrub head 28 in (71 cm) Width of squeegee for 32 in. (81 cm) scrub head 39 in (99 cm) Width of scrub path for 32 in. (81 cm) scrub head 32 in (81 cm) WIDTH LENGTH HEIGHT SPECIAL NOTES: The sound pressure level at the operator’s ear was measured to be 75 dBA. This was a nearfield, broad-band measurement tak
Краткое содержание страницы № 10
HOW THE MACHINE WORKS The Saber Cutter is a battery powered, self- The function of the recovery system is to vacuum the propelled, hard floor scrubber intended for soiled water back into the recovery tank. The commercial use. The appliance applies a cleaning recovery system consists of the squeegee, vacuum solution onto a hard floor, scrubs the floor with motor, float ball filter, recovery tank and controls. brushes, and then vacuums the soiled water back The squeegee wipes the dirty sol
Краткое содержание страницы № 11
COMPONENTS 12 14 3 7 1 2 15 11 6 9 10 13 8 4 5 1. Control Panel 2. Front Cover 3. Recovery Tank 4. Recovery Tank Drain Hose 5. Scrub Head Shrouds 6. Solution Tank 7. Solution Tank Cover 8. Solution Tank Drain Hose 9. Solution Strainer 10. Squeegee 11. Aqua-Mizer 12. Top Cover 13. Vacuum Motor 14. Recovery Tank Dome 15. Accessory Pump Port (Optional) CUTTER 36V (SCE) 86037030 12/05/06 3-4
Краткое содержание страницы № 12
CONTROLS 13 2 3 5 6 9 8 1 15 4 7 10 14 11 12 CUTTER 36V (SCE) 86037030 12/05/06 3-5
Краткое содержание страницы № 13
CONTROLS 1. Key Switch 9. Vacuum Switch 2. Emergency Shut-Off Switch 10. Squeegee Lift Lever 3. Speed Control Knob 11. Squeegee Pitch Adjustment Knob 4. Propel Control Lever 12. Squeegee Deflection Adjustment 5. Reverse Button Knobs 6. Brush Switch 13. Battery Charge Level Indicator 7. Brush Lift Lever 14. Parking Brake 8. Solution Control Knobs 15. Hour Meter 1. KEY SWITCH 4. PROPEL CONTROL LEVERS Controls the power for machine functions. Controls the machine direction, an
Краткое содержание страницы № 14
CONTROLS 7. BRUSH PRESSURE LEVER 10. SQUEEGEE LIFT LEVER Adjusts the amount of brush pressure to the floor by Raises and lowers the squeegee. raising or lowering the scrub deck. To lower the squeegee, lift the lever from its raised To apply brush pressure, lower brush pressure lever position. to floating position. To raise the squeegee, lift the lever from its lowered position. To apply additional pressure, place lever in restricted position. Lock the lever into the lower 11. SQUEEG
Краткое содержание страницы № 15
CONTROLS 13. BATTERY CHARGE LEVEL INDICATOR Indicates the charge level of the batteries. The meter display is divided into 10 vertical bars. Bar illuminated on the far right indicates full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries. When the machine is left overnight with less than a full charge, the display may initially indicate a full charge. It will also i
Краткое содержание страницы № 16
MACHINE OPERATION FILLING SOLUTION TANK PRE-RUN MACHINE INSPECTION Do a pre-run inspection to find possible problems FOR SAFETY: Before leaving or servicing that could cause poor performance or lost time from machine; stop on level surface, turn off machine breakdown. Follow the same procedure each time to and remove key. avoid missing steps. NOTE: See maintenance section for pre-run 1. Turn the machine power off. machine inspection checklist items. 2. Set the parkin
Краткое содержание страницы № 17
MACHINE OPERATION NORMAL SCRUBBING TO BEGIN SCRUBBING Plan the scrubbing pattern in advance. The longest ! WARNING track is around the perimeter of the area to be cleaned. For efficient operation, the runs should be When operating the machine around people, pay the longest possible without turning, stopping, or close attention for unexpected movement. Use raising and lowering scrub deck/squeegee. extra caution around children. NOTE: In order to achieve the best possible results,
Краткое содержание страницы № 18
MACHINE OPERATION DOUBLE SCRUB RECOVERY TANK For floors which are heavily soiled or have thick 1. Unhook the large drain hose from the retainer. accumulations of floor finish may not clean Unscrew the T-handle on plug enough to loosen sufficiently with one pass. In these cases it will be plug, then lower hose in direction of the drain. necessary to double scrub. Do not stand in front of end of hose. Recovered To double scrub, make the first pass over the solution will come out with forc
Краткое содержание страницы № 19
MAINTENANCE SERVICE SCHEDULE MAINTENANCE DAILY WEEKLYMONTHLY 100 200 HRS HRS Check batteries after charging; add water if necessary * Check pad wear to prevent buildup of chemicals * Check linkages and connectors for wear and damage * Check hoses for wear, blockages, or damage * Clean squeegee; check for adjustment; inspect for wear * Check handles, switches, knobs, domes, and gaskets for damage * Clean out recovery tank * Clean out solution tank;
Краткое содержание страницы № 20
MAINTENANCE 5 1 7 6 9 11 8 3 4 2 10 1. Batteries 2. Squeegee 3. Aqua Mizer 4. Scrub Brushes 5. Recovery Tank Float Shut-Off 6. Solution Strainer 7. Brush Motor 8. Traction Motor 9. Circuit Breakers 10. Brush Shroud & Brush Skirts 11. Vacuum Motor CUTTER 36V (SCE) 86037030 12/05/06 4-2
