Краткое содержание страницы № 1
NV36 Series
Owner’s Guide
www.sharkclean.com
NV36_NV36A_26_IB_ENG_110421_1.indd 1 11-04-29 9:51 AM
Краткое содержание страницы № 2
This manual covers model numbers: NV36 26 NV36A 26 TECHNICAL SPECIFICATIONS Voltage: 120V. Watts: 1200W Amps: 10A Hertz: 60Hz TOLL FREE: 1-800-798-7398 NV36_NV36A_26_IB_ENG_110421_1.indd 2 11-04-29 9:51 AM
Краткое содержание страницы № 3
Contents Important Safety Instructions 2 Thank you for purchasing Getting Started 4 ® the Shark Using the Vacuum 6 ™ Navigator Cleaning with the Vacuum Accessories 7 Upright Vacuum. Emptying the Dust Cup Assembly 8 Proper Care of Your Vacuum 9 Troubleshooting 10 Checking for Blockages 11 Maintenance 12 Warranty and Registration 13 TOLL FREE: 1-800-798-7398 www.sharkclean.com 1 NV36_NV36A_26_IB_ENG_110421_1.indd 1 11-04-29 9:51 AM
Краткое содержание страницы № 4
IMPORTANT SAFETY INSTRUCTIONS For Household Use Only ® ™ WHEN USING YOUR SHARK NAVIGATOR GENERAL ELECTRICAL SAFETY: UPRIGHT VACUUM, BASIC SAFETY 1. Unplug from electrical outlet when not in use PRECAUTIONS SHOULD ALWAYS BE and before servicing. FOLLOWED, INCLUDING THE FOLLOWING: 2. DO NOT use vacuum with a damaged cord or plug. READ ALL INSTRUCTIONS BEFORE USING 3. D O NOT pull or carry vacuum by the cord. ® ™ YOUR SHARK NAVIGATOR UPRIGHT 4. DO NOT unplug by pulling on cord; to
Краткое содержание страницы № 5
GENERAL USE: GENERAL CLEANING: 17. Use only as described in this manual. 25. DO NOT run the vacuum over large-sized objects. 18. D O NOT put any objects into openings. 26. DO NOT pick up hard or sharp objects such as 19. Keep your work area well lit. glass, nails, screws or coins that could damage 20. K eep the vacuum moving over the carpet the vacuum cleaner. surface at all times to avoid damaging the 27. D O NOT pick up smoking or burning objects carpet fibers. such as hot coa
Краткое содержание страницы № 6
Getting Started 4 A C E 5 F B G 3 D 7 2 H I ® ™ Your Shark Navigator 4 S lide the handle assembly Upright is easy to assemble: into the upright unit aligning the hose hook on the handle FIRST THING’S FIRST, YOU 1 Lay your vacuum body on a assembly with the power cord NEED TO KNOW WHAT’S IN THE level surface. hooks on the back of the unit. BOX YOU JUST OPENED: 2 Slide the electrical connection 5 Secure the handle assembly in A Vacuum Body from the power nozzle into the plac
Краткое содержание страницы № 7
8 9 c d a b 8 Attach the Super Stretch Hose: 9 To store the vacuum: I MPORTANT: For suction to reach the Floor a) Snap hose into swivel W hen storing your vacuum, Power Nozzle, the Cleaning wind the cord around the two connector Wand and Super Stretch Hose cord holders and secure with b) Route under anti-tip hook must be attached securely on cord clip: the vacuum body. c) Route over upper hose • Quick Cord release at the holder 10 To carry the vacuum: top of the u
Краткое содержание страницы № 8
Using the Vacuum IMPORTANT: To protect your carpets, the brushroll will only Bare Floors / Tools turn on when you have pulled the handle back towards you and released the Floor Power Nozzle. 4 OFF Carpets 1 Indicator Light ® ™ Your Shark Navigator Upright 4 When cleaning carpets: IMPOR TANT: Vacuum can be used to clean bare Your Brushroll Indicator Light Ensure you have pulled the floors or carpets – with the click of will illuminate solid green when handle towards you and
Краткое содержание страницы № 9
Cleaning with the Vacuum Accessories 1 5 6 4 3 2 Extended Reach Cleaning Kit 5 6 4 3 2 Using the Cleaning Wand: Stand the vacuum into upright position. Remove the CleaningW and (with hose attached) from the unit. Vacuum Accessories Push the selected tool into the Before cleaning with your Your vacuum comes with a Super end of the CleaningW and. accessories: Stretch Hose and CleaningW and. 3 P et Hair Power Brush Use one or the other to attach your Stand vacuum int
Краткое содержание страницы № 10
Maintenance CAUTION: For best results empty the Dust Cup Unplug the vacuum; after each use; empty several times failure to do so might during prolonged usage .or when it result in electric reaches the MAX fill line . shock. NEVER OVER-FILL THE DUST CUP. Stand vacuum into upright position. Turn vacuum off. 1 2 3 To empty the Dust Cup: 3 Option B: For Allergy Sufferers: Note: Some dust and debris Wrap a trash bag around the may remain in the top of your 1 Grip carry handl
Краткое содержание страницы № 11
COMPONENT MAINTENANCE SCHEDULE 1 Dust Cup Empty each time you vacuum. Pre-Motor Foam Filter Rinse and air dry every 3 months under normal use. 2 Pre-Motor Felt Filter Rinse and air dry every 3 months under normal use. 3 4 Post-Motor Filter Clean once every 12 months under normal use. DO NOT operate the vacuum without ALL the filters in place. IMPOR TANT: Loss of Suction may occurif foam filters are not cleaned DO NOT operate the vacuum with WET filters. every 3 months .Rinse a
Краткое содержание страницы № 12
Troubleshooting WARNING: to reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. PROBLEM POSSIBLE REASONS & SOLUTIONS Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting back into the vacuum. (See “Maintenance” sections for instructions.) Vacuum is not Dust cup may be full; empty dust cup. picking up dirt. Check hose and hose connections for blockage
Краткое содержание страницы № 13
Checking for Blockages Blockages may cause your vacuum to overheat and shut down. If so , clear the blockages ,then follow the instructions for Resetting the Motor Thermostat on page 12. WARNING: Never insert sharp 2 objects into any opening to clear an obstruction. 1 IMPORTANT: Damages caused while clearing or attempting to clear blockages are not covered under your product’s limited warranty. 3 Unplug the vacuum before checking for blockages. Reassemble all parts securel
Краткое содержание страницы № 14
Maintenance Resetting the Motor Thermostat A ® Your Shark Upright Vacuum is equipped with a protective Motor Thermostat. If the motor should overheat, the thermostat shuts off the power. 1 Cleaning the Pet Hair Power Brush - Slide locking latch (A) forward. Gently tilt brush housing upward to open. IMPORTANT: DO NOT force; it will not open all the way. Remove debris from turbine wheel and air passage. Ordering Replacement Parts To order additional parts and accessorie
Краткое содержание страницы № 15
Euro-Pro Five-Year (5) Limited Warranty EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of five (5) years from the date of the original purchase when , utilized for normal household use subject , to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories freight , p
Краткое содержание страницы № 16
Euro-Pro Operating LLC USA: Newton, MA 02459 CAN: 4400 Bois Franc, St-Laurent, QC H4S 1A7 English: 1-800-798-7398 www.sharkclean.com Copyright © Euro-Pro Operating LLC 2011 Printed in China Illustrations may differ from actual product. NV36-NV36A.E.110421.1 NV36_NV36A_26_IB_ENG_110421_1.indd 14 11-04-29 9:51 AM
