Краткое содержание страницы № 1
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 1
UNIVERSAL REMOTE CONTROL
USER’S GUIDE
CONTROL REMOTO UNIVERSAL
GUíA DEL USARIO
Краткое содержание страницы № 2
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 2 TABLE OF CONTENTS Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features And Functions . . . . . . . . . . . . . . . . . . . 6 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . 7 Programming Device Control. . . . . . . . . . . . . . . 8 Programming TV/VCR Combo Control . . . . . . . . 9 Searching For Your Code. . . . . . . . . . . . . . . . . 11 Checking The Codes . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 3
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 3 INTRODUCTION The Cox Universal Remote Control by Universal Electronics is our latest generation universal remote control. It is designed with sophisticated technology that will allow you to consolidate the clutter of all of the original remote controls in your home entertainment system. Moreover, it’s packed with easy-to-use features such as: • Preprogrammed to operate the cable converter sup- plied by Cox Communications • Preprogrammed i
Краткое содержание страницы № 4
Краткое содержание страницы № 5
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 5 Key Charts Use SETUP for all programming sequences. Press POWER once to turn on or off a home entertainment device. Press and hold MASTER POWER for 3 seconds to turn on or off all home entertainment devices (see Using The Master Power Key on page 15). Press AUX, VCR, TV, or CABLE once to select a home entertainment device to control. Each key has an embedded LED (red light) that blinks upon selection and indicates that the remote
Краткое содержание страницы № 6
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 6 FEATURES AND FUNCTIONS Use SETTINGS to access additional cable features (see your cable converter’s manual). Press MENU once to display the available interactive services. Press PPV to view the available Pay-Per-View event. Use VOL+ (or VOL–) to raise (or lower) the sound volume. Press LAST once to recall the last channel. Use FAV to cycle through your favorite channels stored in your cable converter. Press MUTE once to turn the soun
Краткое содержание страницы № 7
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 7 INSTALLING BATTERIES ❶ ❷ ❸ 1. On the back of the remote control, push the tab and lift off the battery cover. 2. Obtain two (2) fully-charged AA alkaline bat- teries. Match the + and – marks on the bat- teries to the + and – marks in the battery case, then insert the new batteries. 3. Align the cover’s keys with the case’s holes and press the cover back into place. The tab should click when the cover is locked. 4. Test the unit by pressi
Краткое содержание страницы № 8
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 8 PROGRAMMING DEVICE CONTROL The Cox Universal Remote Control is preprogrammed to operate your cable converter, an RCA TV, an RCA VCR, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section: NOTES: To control a DVD player, program the VCR or AUX key. To control a PVR, program the VCR key. To control a stereo amplifier or receiver, program the AUX key. For TV/V
Краткое содержание страницы № 9
Краткое содержание страницы № 10
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 10 If there is no separate TV code listed, you will need to perform the following steps to access volume control: a. Press and hold SETUP until the VCR key blinks twice, then release SETUP. b. Enter 9 - 9 - 3. The VCR key will blink twice. c. Press VCR once. The VCR key will blink twice. 6. For future reference, write down each work- ing device code in the boxes below: TV/VCR TV (if used) 10
Краткое содержание страницы № 11
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 11 SEARCHING FOR YOUR CODE If your TV, VCR, Cable Converter or Auxiliary device does not respond to the Cox Universal Remote Control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. Turn on your TV. 2. On the remote control, press TV once. Then press and hold SETUP until the TV key blinks twice, then release SETUP.
Краткое содержание страницы № 12
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 12 CHECKING THE CODES If you have set up the Cox Universal Remote Control using the Searching For Your Code procedure on the previous page, you may need to find out which four- digit code is operating your equipment. For example, to find out which code is operating your TV: 1. Turn on your TV. 2. On the remote control, press TV once. Then press and hold SETUP until the TV key blinks twice, then release SETUP. 3. Enter 9 - 9 - 0. T
Краткое содержание страницы № 13
Краткое содержание страницы № 14
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 14 PROGRAMMING CHANNEL CONTROL LOCK By default, the remote control’s channel-control capabilities are locked to the cable converter. The affected keys are 0 ~9, CH+, CH–, ENTER, and LAST. This will guarantee that you do not inadvertently change a channel on your TV or VCR. However, you can de-activate this feature to allow full access to these keys in the TV and VCR modes. To De-Activate Channel Control Lock: 1. On the remote control, pre
Краткое содержание страницы № 15
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 15 USING THE MASTER POWER KEY The Cox Universal Remote Control is equipped with a unique feature that allows you to sequentially turn on or off all of your home entertainment devices with a single key press as follows: 1. Point the remote control at the devices. 2. Press and hold MASTER POWER for 3 seconds to sequentially turn on or off all home enter- tainment devices. Depending on what mode is currently select- ed, the remote control
Краткое содержание страницы № 16
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 16 RE-ASSIGNING DEVICE KEYS The Cox Universal Remote Control can be set up to con- trol a second TV or VCR, or any combination of up to four home entertainment devices. For example, to have the unit control a TV, a Cable Converter, and two VCRs, you will need to re-assign the unused AUX key to operate the second VCR as follows: 1. On the remote control, press VCR once. Then press and hold SETUP until the VCR key blinks twice, then releas
Краткое содержание страницы № 17
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 17 CHANGING VOLUME LOCK The Cox Universal Remote Control is set to control volume of a device through your TV while in the TV, VCR, or Cable mode. However, in the Auxiliary mode, you will still have separate control of of your auxiliary device’s volume. If your TV is not remote controllable, or if you would like the volume to be controlled by a different device, you can change the Volume Lock setting to control a volume through a non-associ
Краткое содержание страницы № 18
Краткое содержание страницы № 19
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 19 PROBLEM: No volume on a second TV. SOLUTION: Follow instructions in Changing Volume Lock (see previous page). PROBLEM: CH+ , CH – , and LAST do not work for your RCA TV. SOLUTION: Due to RCA design (1983–1987), only the original remote control will operate these functions. PROBLEM: Changing channels does not work properly. SOLUTION: If original remote control required pressing ENTER to change channels, press ENTER on the remote control
Краткое содержание страницы № 20
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 20 INTRODUCCIÓN El Control remoto universal Cox de Universal Electronics es nuestro control remoto universal de última generación. Está diseñado con una sofisticada tecnología que le permitirá reunir las funciones de todos los controles a distancia de su hogar en un solo aparato. Además, viene incluido con funciones de fácil uso como: • Preprogramación para operar el convertidor de cable suministrado por Cox Communications • Teclas de vínc
