Краткое содержание страницы № 1
®
HTR-5
LCD TOUCH SCREEN PREPROGRAMMED
AND LEARNING REMOTE CONTROL
ENG
Краткое содержание страницы № 2
ENG 2
Краткое содержание страницы № 3
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Summary of Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 LCD Screen and Button Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Краткое содержание страницы № 4
INTRODUCTION Thank you for choosing the NAD HTR-5 Home Theater Remote Control. The HTR-5 is one of the most powerful and flexible remote controllers on the market today, allowing you to have complete control of up to twelve different components (devices). Powerful “macros” are available to send a complex series of commands which allow you to automate the process of turning on and selecting the correct inputs and proper settings of all your audio and video components. The HTR-5 includes a LCD tou
Краткое содержание страницы № 5
BATTERY INSTALLATION HTR-5 uses four AA batteries. Please be sure to match the batteries with the (+) and (-) markings inside the battery compartment during installation. The remote control self-tests for three seconds after the batteries are installed and then automatically moves to the setting mode for programming. ENG NOTE Please do not mix old batteries with new ones or mix different types of batteries. 5
Краткое содержание страницы № 6
SUMMARY OF OPERATIONS DESCRIPTION OF DEVICES The HTR-5 is designed to operate up to twelve components. They are Audio, CATV, Satellite, TV, DVD, VCR1, VCR2, Laser Disc, Tuner, CD, Tape and AUX. However, the device button name can be changed to meet your exact needs. You can also create a favorite device page and transfer the frequently used devices to the favorite device page in order to change the device button sizes and shapes. Once you create the favorite device page, it will appear as a defa
Краткое содержание страницы № 7
SUMMARY OF OPERATIONS MACRO OPERATION The remote control is capable of sending out a series of commands with the single press of a button. There are three types of macro buttons you can use for such macro operations and they are as follows: 1 M1, M2 and M3 buttons on MAIN page. Each of these three buttons are designed to send out up to 28 series of commands you programmed into the buttons. It is generally used to turn on and turn off all of your A/V components with the single press of a button.
Краткое содержание страницы № 8
SUMMARY OF OPERATIONS EDITING THE BUTTONS ON LCD SCREEN You can change the size and shape of the buttons on the LCD screen. You can also create, delete, copy and move the buttons from one location to another on the LCD. In addition, you can erase text and write your own on the buttons using different font sizes. This can be done either directly on the remote control without a personal computer or with the aid of a personal computer. Please refer to page 22 in the manual for details. LOADING PRO
Краткое содержание страницы № 9
LCD SCREEN AND BUTTON LAYOUT ENG 1 Displays the name of the device selected 2 Displays the data and clock 3 Displays page number 4 Displays the device names 5 LIGHT button 6 MACRO buttons 7 MAIN DEVICE menu button 8 LCD Page change button 9 POWER 10 MUTE 11 VOLUME 12 CHANNEL 13 Previous channel button 14 TRANSPORT functions (PLAY, STOP, REWIND and FF) for VCR, CD and DVD etc. 15 JOYSTICK button (UP, DOWN, LEFT,RIGHT and ENTER) to move the cursor and enter the selection by pushing down the joysti
Краткое содержание страницы № 10
GETTING READY WITH SYSTEM SETTING All the programming is done by first entering the SYSTEM SETTING mode in the remote control. Press both the MAIN and PAGE buttons simultaneously for five seconds to enter the SYSTEM SETTING mode. Move the cursor on the screen with the joystick to your selection in the list. Enter the selection by pushing down the joystick. You can exit the setting mode by simply pressing the MAIN button or bring the cursor to 8. TO EXIT with joystick and push the joystick down.
Краткое содержание страницы № 11
PROGRAMMING THE REMOTE CONTROL You can program the HTR-5 to make it compatible with all of your components by following either the preprogramming method or teaching it using your original remote controls. PREPROGRAMMING METHOD USING A THREE-DIGIT CODE NUMBER: 1 Turn on the component you plan to operate manually. 2 Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds. 3 Using the joystick, move the cursor down in the LCD screen to 3. PREPROGRAM
Краткое содержание страницы № 12
PROGRAMMING THE REMOTE CONTROL 8 Confirm that you entered the right code number that matches your component by pressing other buttons such as POWER, VOLUME, MUTE and CHANNEL. If any of the buttons do not operate as they should, please repeat from Step 5. 9 Continue to program other components by repeating from the above step 5. 10 Once you have completed programming all the devices, exit from the programming mode by pressing both the MAIN and PAGE buttons simultaneously. 11 You will now be in th
Краткое содержание страницы № 13
PROGRAMMING THE REMOTE CONTROL 7 Point the remote control to the component and press the BRAND button. 8 Press the number button on LCD screen that bears the first alphabetical character of your brand name. (Please press the number button within 20 seconds of programming). ENG Please note that pressing the number button once will only show the first letter in that alphabet group. You will need to press again to obtain the other letters. 9 If the first code number assigned to the brand is the rig
Краткое содержание страницы № 14
PROGRAMMING THE REMOTE CONTROL 10 Continue to program other components by repeating from Step 5. 11 Once you have completed programming all the devices, exit from the programming mode by pressing both the MAIN and PAGE buttons simultaneously. 12 You will be in the setting mode. Move the cursor to 8. TO EXIT and press the joystick down or simply press the MAIN button to exit to the main menu. LEARNING METHOD You can also teach any of the buttons in the remote control except the MAIN and PAGE butt
Краткое содержание страницы № 15
PROGRAMMING THE REMOTE CONTROL 4 Place your original remote control to the HTR-5 head to head about 2-3 inches apart as shown below. HTR-5 Original Remote 5 Press either the device button or functional button, whichever you wish to teach in the HTR–5. It is now ready to learn on the button you selected. 6 Press the button on your original remote control that you wish to teach the HTR-5. The HTR-5 will “beep” indicating that it has received the signal and the LCD will show “RETRY”. (Please enter
Краткое содержание страницы № 16
PROGRAMMING THE REMOTE CONTROL TO ERASE THE LEARNED BUTTONS TO ERASE A SINGLE BUTTON: 1 Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds. 2 Move the cursor to 4. Learning with the joystick and then push the joystick down to enter the learning mode. 3 Move the cursor to COMMON BUTTON and select the device that contains the functional button you wish to erase. If you wish to erase the function in the device button, move the cursor to DEVICE
Краткое содержание страницы № 17
PROGRAMMING THE REMOTE CONTROL 3 Press the MUTE button to move the cursor to the DEVICE BUTTON and keep the device button you wish to erase all the learned commands down for five seconds until the LCD shows ERASED. This will erase the function taught in the device button. If you continue to press the device button for another five seconds, it will erase all the functions in the device. 4 Once you complete the erasing and wish to exit from this mode, press the MAIN button to go back to the main p
Краткое содержание страницы № 18
SYSTEM AND OPERATIONS SETUP Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds. Move the cursor on the LCD screen to 2. SYSTEM & OPTIONS with the joystick. Enter this mode by pushing the joystick down and the following can be programmed: SETTING UP THE SYSTEM The LCD screen will list the following choices: Range Default Buzzer Status: High, Low, Off High Back Light On Time: 0 - 120 seconds 20 seconds LCD on Time: 5 - 120 seconds 30 seconds
Краткое содержание страницы № 19
SYSTEM AND OPERATIONS SET UP MACRO AND PUNCH THROUGH PROGRAMMING The MACRO and PUNCH THROUGH can be also programmed in this mode. Press the button you wish to program and follow procedures shown below: MACRO PROGRAMMING There are three type of macro functions you can program. They are as follows: 1 M1, M2 and M3 in the Main menu. Designed to send out up to twenty eight commands from each of the three buttons. 2Twelve device buttons in the Main menu. Send out up to fourteen commands from each dev
Краткое содержание страницы № 20
SYSTEM OPERATIONS AND SET UP FOR DEVICE BUTTONS: 1 Press one of the twelve device buttons you wish to store macro functions with the cursor on DEVICE BUTTON. 2 Move the cursor to COMMON BUTTON and select again either the same or another device button whose functional buttons you wish to store in the device macro button you first selected. You can store up to 14 commands in the device macro buttons. 3 Store the commands you selected to the macro button by pressing CH (UP) button. To cancel the ma
