Руководство по эксплуатации JL Audio Stealthbox SB-H-RIDGLNE/10W3v3

Краткое содержание страницы № 1

SB-H-RIDGLNE/10W3v3_ 011214

INSTALLATION
If you choose to perform the installation yourself, it is absolutely vital that
DIFFICULT Y:
®
the Stealthbox be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems: OUT
INSTALL ATION GUIDE
OF
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
SB-H-RIDGLNE/10W3v3
25
2) A loose enclosure present

Краткое содержание страницы № 2

SB-H-RIDGLNE/10W3v3_ 011214 STEP 4 INC L UDED H A RD W A RE (A) Posistion the Stealthbox® into place and press firmly down. This is to make an impression onto the wax square. (1) 3/8-inch - 16 Hex Nut (1) 3-inch x 3-inch Wax Square Remove the Stealthbox®. (1) 3/8-inch x 3/4-inch USS Flat Washer (1) 3/8-inch - 16 x 2-1/4-inch Socket Cup Screw (1) 3/8-inch x 1-1/4-inch Fender Washer (B) With a 1/2" drill bit or StepBit/Unibit® and drill. Drill at the (1) 3/8-inch Lock Washer impression on