Руководство по эксплуатации JL Audio Stealthbox SB-J-LBRTY/12W3v3/DG

Краткое содержание страницы № 1

®
Stealthbox
INSTALLATION GUIDE START
HERE
for the
SB-J-LBRTY/12W3
➔ ➔ ➔
(Freedom,Limited,Renegade,Sport)
STEP 1: Open the rear door and remove STEP 2: The enclsoure will be mounted on STEP 3: To remove both cleats, you need to
any contents and the retractable security the driver’s side cargo area. Both cleats are to remove both of the OEM rivets.
cover. be removed.
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-

Краткое содержание страницы № 2

Cont. From Previous Page ➔ ➔➔➔ STEP 7: You will need a tape measure and a STEP 8: Front Cleat Location: Spread STEP 9: With 1/2” drill bit and drill. Drill at the STEP 10: This is what your 1/2” drilled hole is the carpet. Find the center between the two marked locations from STEP 7 & STEP8 going to look like.This is the front cleat location. marker or pencil for this step. holes, then measure 1/2” out from the holes Rear Cleat Location: Spread the carpet. *CAUTION* to the middle of vehicle.Then

Краткое содержание страницы № 3

Cont. From Previous Page ➔ CONGRATULATIONS! INSTALL COMPLETE. ➔ ➔➔ ➔ STEP 13(b): This is the more time consuming, STEP 14: The rear exposed socket cup set screw STEP 15: With the Stealthbox properly mounted, but easier way to access the front exposed threaded is a lot easier to excess. Place a supplied 3/8” fender run speaker wire to the Stealthbox’s terminal cup. Included Hardware: rod.You need to unbolt the over flow gas can. Please washer, a supplied 3/8” lock washer then a supplied Wire it