Руководство по эксплуатации Premier Mounts PSD-S

Краткое содержание страницы № 1

INSTALLATION INSTRUCTIONS
PSD-S
Ceiling Mount Adapter
AUSTRALIA, NEW ZEALAND, OCEANIA
NORTH AMERICA EUROPE (DISTRIBUTOR)
3130 East Miraloma Avenue
Swallow House, P.O. Box 295
Anaheim, CA 92806 USA
Shilton Industrial Estate, Mordialloc Victoria 3195
USA and Canada –
Shilton, Coventry, England CV79JY Australia
Phone: 800-368-9700
Phone: +44 (0) 2476 614700 Phone: 039586 6330
Fax: 800-832-4888
Fax: +44 (0) 2476 614710 www.premiermounts.com.au
Other Locations – Phone: (001)-714-632-7100; Fax: (001)

Краткое содержание страницы № 2

PSD-S Table of Contents Warning Statements 2 Parts List 3 Installation Tools 3 Attaching the Ceiling Adapter 4 Attaching the Mounting Plate 6 Technical Specififcations 8 Warranty 9 Warning Statements THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF THE DISPLAY. IF NOT, THE CEILING STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INST

Краткое содержание страницы № 3

PSD-S Parts List This ceiling mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700). M10 Nut (Qty 4) M10 Hex Head Bolt Ceiling Adapter (Qty 4) (Qty 1) M10 Flat Washer (Qty 8) Installation Tools Phillips Head Screwdriver Soft Material/Blanket Pencil Ladder Inst

Краткое содержание страницы № 4

PSD-S Attaching the Ceiling Adapter Before the following steps are begun, the appropriate suspension device must be installed. Premier mounts offers the AST-1321, AST-2446 or a standard 1-1/2” NPT extension pipe. Please see the installation instructions that are included with these respective mounting configurations. Step 1. To attach the ceiling adapter to the suspension device (not included), rotate the ceiling adapter clockwise onto the suspension device a minimum of five (5) complete t

Краткое содержание страницы № 5

PSD-S A Phillips head screwdriver is required to perform the following step. Step 2. Once the ceiling adapter has been attached, tighten the M6 x 12mm Phillips head set screw using a Phillips screwdriver. Installation Instructions Page 5

Краткое содержание страницы № 6

PSD-S Attaching the Mounting Plate Step 1. Use four (4) M10 hex head bolts, eight (8) M10 fl at washers, and four (4) M10 nuts to attach the mounting plate to the ceiling adapter. At this time, fi nger tighten all hardware. Page 6 Installation Instructions

Краткое содержание страницы № 7

PSD-S A 17mm open-end wrench and a 17mm socket wrench will be required to perform the following step. Step 2. Once the both units have been attached together, use a 17mm socket wrench and a 17mm wrench to tighten the M10 hardware. Installation Instructions Page 7

Краткое содержание страницы № 8

PSD-S Technical Specifi cations All measurements are in inches (mm). Page 8 Installation Instructions

Краткое содержание страницы № 9

PSD-S Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.