Краткое содержание страницы № 1
Haier Network Air Conditioner
Two by One Room Air Conditioner
AB212BCBAA
CONTENTS
Before Use
Operation Points*********** 1-2
Name of Parts************* 3-4
Safety Precautions********** 5-6
Operation Instruction
Fan Operation************** 7
Auto, Cooling, Dehumidifying,
Heating operation************ 8
Swing Operation************ 9
Sleep Function************* 10
Timer On/Off Function******** 11
Timer On-Off Function ******** 12
Usersí Attention************ 13
Maintenance
Maintenance ********
Краткое содержание страницы № 2
Characteristics of Products Characteristics of Products 1.Free combination multi-split. 2.Four-direction air sending, more even temperature adjustment. 3.Inner hidden type installation, space-saving; harmonized with the ceiling, exquisite and beautiful. 4.Powerful circular air volume, quick temperature adjustment. 5.This air conditioner has POWER FAILURE RESUME FUNCTION. 6.Anti-bacteria mildew resistant air filter, fresher air creates more healthy. This unit has the function of far distanc
Краткое содержание страницы № 3
Operation points Operation of air conditioner When the ambient humidity is too high, in COOLING or DEHUMIDIFYING mode, there may be water dropped in the air outlet. 3-minute protection function If start the unit immediately only after it is turned off, the compressor will start after 3 minutes have elapsed to protect the compressor. Change of fan speed In COOLING mode, the air sending is set at AUTO, when the indoor temperature is near the set temperature, the fan speed will lower automatically
Краткое содержание страницы № 4
Operation points Anti-cold air blowing out Please wait During Heating operation, after starting the unit, the indoor fan ? motor will not rotate immediately to prevent cold air from blowing out. Defrosting function During Heating operation, when frost formed on the heat exchanger of outdoor unit, the air conditioner will defrost automatically for several minutes. During defrosting, both the fan of indoor and outdoor unit do not run. After finishing defrosting, the air conditioner will automatica
Краткое содержание страницы № 5
Name of Parts Indoor Unit Drain hose Louver Louver (inside of air outlet) Connection pipes Air outlet and electric wire Air filter (inside of air inlet grille) Air inlet grille Wire Controller ** ** ** AUTO ** ** ** ** ** ** ** ** **** ** **/** 3
Краткое содержание страницы № 6
Name of Parts Wire Controller 14 15 16 17 18 19 13 22.Setting button 12 Used to confirm 11 the time of timer 10 ** ** ** and clock 9 AUTO 20 ** 23.Sleep button 8 21 ** ** 7 Used to set Sleep 22 6 state or Power ** ** ** 23 ** Failure Resume 5 24 ** **** ** Function 4 25 26 24.Time Adjusting 3 **/** 27 button 2 28 1 Used to adjust the 29 time of timer and 13.Sleep state display 1.ON/OFF button clock 14.Network control display Used to turn on/off unit 2.Temperature display 15.Working
Краткое содержание страницы № 7
Safety Precautions Please read the following Safety Precautions carefully and use the air conditioner properly. The following lists four kinds of safety precaution items and suggestions: ! Warning: Improper use may cause death or serious injury. ! Notice: Improper use may cause body hurt or unit damage; in some circumstance, it may cause serious results. * Those contents marked with “Prohibition” are definitely prohibited action, otherwise, it may cause unit damage or risk to users’
Краткое содержание страницы № 8
Safety Precautions Notice Do not use wet hands to operate the Do not use water to air conditioner. clean air conditioner, Otherwise, it may otherwise cause electric shock. may cause electric shock. Connected with the grounding wire. Only use the proper specified fuse. The grounding wire shouldn’t be Do not use cable or connected with gas pipe, tap water pipe, other materials to lightning rod or telephone line. replace the fuse, Improper grounding otherwise it may may cause electric shock accide
Краткое содержание страницы № 9
1 4 2 Operation instruction Fan operation 1 Turn on the unit Press the ON/OFF button to turn on the ** ** ** unit The LCD display of the wire controller ** 3 will show the previous working state (except for Timer, Sleep, Swing mode), the ** ** operation indicator light on the wire controller ** ** will light up. ** **** ** 2 Choose of working mode Press MODE button, each press the **/** working mode will change as the following sequence: . AUTO DEHU HEATING FAN COOLING choose FAN operation 3 Adj
Краткое содержание страницы № 10
Operation instruction Auto/Cooling/Dehumidifying/Heating operation 1 Turn on the unit Press the ON/OFF button to turn on the 2 ** ** ** unit The LCD display of the wire 4 ** controller will show the previous working state (except for TIMER, 3** ** 3 SWING, SLEEP mode). The operation ** ** ** indicator light on the wire controller ** **** ** will light up. 5 2 Choose of working mode **/** 1 Press MODE button, each press the working mode will change as the following sequence: When room temperature
Краткое содержание страницы № 11
Operation instruction Swing Auto swing Press SWING button, the LCD of the wire controller display “ ”, the louver of the air conditioner begins ** ** ** automatic swing and air sending. ** ** ** ** ** ** ** **** ** Fixed air sending direction **/** When the Auto SWING of the air conditioner swings to an appropriate angle, press SWING button, the display “ ” on the LCD of the wire controller will disappear, the air sending direction is fixed. When fixing the air sending direction, the lou
Краткое содержание страницы № 12
Operation instruction Sleep operation Before going to bed, you can press the SLEEP button, the air conditioner will operate in comfort sleep mode to make you have a sound sleep. Before using this function, you should calibrate the clock first, otherwise, the SLEEP function will be out of order. Use of SLEEP function After turning on the unit, setting the working mode, then press SLEEP button to make the air conditioner have the previous Sleep time (powered on for the first time or after performi
Краткое содержание страницы № 13
Operation instruction Timer On/Off function Before using TIMER function, calibrate the clock first (referring to page 4). When you wake up in the morning, before going back to home after work or after going to bed, you ** ** ** can let your air conditioner automatically turn ** on or turn off. ** ** 1.Turn on the unit ** ** ** After turning on the unit, set the desired working mode. ** **** ** The LCD of the wire controller will show working mode. (except for Timer, Sleep, Swing) **/** 2.Set of
Краткое содержание страницы № 14
Operation instruction Timer On-Off function 1.Turn on the unit After turning on the unit, set the desired working mode. ** ** ** The LCD of the wire controller will show ** working mode. (except for Timer, Sleep, Swing) ** ** 2.Set of TIMER mode ** ** ** 6 Press the TIMER button to change the 5 ** **** ** TIMER mode, each press the TIMER mode will change as the following **/** sequence: Blank ON OFF ON OFF AM PM AM PM TIMER ON TIMER OFF TIMER ON-OFF Then choose the TIMER ON-OFF mode. ON
Краткое содержание страницы № 15
Users’ Attention If do not use the air conditioner Do not press tightly with the LCD part of for a long time, it is necessary to the wire controller to avoid damage of it. cut off power. Set proper room temperature If do not cut Cut off Not too low or high and make every peop- power off power, the le in the Heating is unit may consume Cooling is room 18~23* 26~28* power. In order to protect the unit, feel before using the air conditioner comfortable. again, turning on the power at least Do not l
Краткое содержание страницы № 16
Maintenance Notice The repair can only be performed Before touch the wire connection by the professional workers. device, cut off the power first. Notice Only after turning off the unit and Do not use water to clean the air conditioner. cutting off the power can the cleaning of the unit be performed. Otherwise, it Otherwise, it may cause electric may cause shock or injury. electric Don’t in operation shock Use stable stand support. Please pay high attention when cleaning the unit Daily maintena
Краткое содержание страницы № 17
Maintenance Clean the air filter 2.Dismantle the air filter Pull the two side handles at the back of the air inlet grille, lift the air filter to dismantle it. Open and remove 3.Clean Notice Do not use the hot water over 50* to clean to avoid discoloration or deformation. Do not dry the unit on fire, the filter may be burnt. Use cleaner or water to clean to remove dust. *A*Use cleaner to remove dust. * B *When the dust is too much, use soft brush and neutral detergent. (
Краткое содержание страницы № 18
Maintenance Clean the air inlet grille Open 1. Open air inlet grille Pull the two handles at the same time, slowly draw them out. (when closing it, the procedure is reversed.) 2. Remove air filter Referring to “Clean the air filter”. 3. Remove the air inlet grille Open the air inlet grille for 45o, the lift it up. 4. Clean Notice Do not use the hot water over 50* to clean to avoid discoloration or deformation. Use soft brush, water and neutral detergent to clean, then throw the water off. Instru
Краткое содержание страницы № 19
Maintenance Clean the air outlet and casing Notice Do not use gasoline, benzene, diluent, polish powder or liquid pesticide to clean. Do not use the hot water over 50* to clean to avoid discoloration or deformation. Use soft dry cloth to clean. If cannot remove the dust, use water or neutral detergent. If the louver of the air conditioner is too dirty, it may be dismantled (as the following described) for cleaning. Dismantle and install louver 1. Fix the louver at the lowest position. Referring
Краткое содержание страницы № 20
Maintenance Maintenance before and after the using season. Before using season 1.Check the following items: If the air inlet and outlet of indoor and outdoor unit are blocked. If the earth wire is proper. If the wire connection is proper. If there is abnormal phenomenon, please ask the after-sale service staffs for help. 2.Cleaning the air filter or air inlet and casing After cleaning the air filter, it must be reinstalled. 3.Turn on the power After usi
