Краткое содержание страницы № 1
MULTI-FORMAT MONITOR
INSTRUCTIONS
DT-V1700CG
For Customer Use:
Enter below the Serial No. which is located on the rear of
the cabinet. Retain this information for future reference.
UNDER PULSE COLOR
DEGAUSS SCAN CROSS OFF
SLOT 1 SLOT 2 SLOT 3 POWER
A B C D E F
MENU BLUE ASPECT AREA INPUT SELECT
VOLUME
CHECK MARKER
Model No. : DT-V1700CG
Serial No. :
The illustration above shows the DT-V1700CG with provided
wide mask attached.
Untitled-1 1 01.3.27, 9:58
Краткое содержание страницы № 2
Thank you for purchasing this JVC multi-format monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. SAFETY PRECAUTIONS FCC INFORMATION WARNING : CAUTION: Changes or modification not approved by TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT JVC could void the user’s authority to operate EXPOSE THIS MONITOR TO RAIN OR MOISTURE. the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digi
Краткое содержание страницы № 3
CONTENTS SAFETY PRECAUTIONS ........................................................................2 CONTROLS AND FEATURES ................................................................4 CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) ....................................................................6 PREPARATION .......................................................................................8 BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) ................................................
Краткое содержание страницы № 4
CONTROLS AND FEATURES FRONT VIEW 1 DEGAUSS UNDER SCAN CR PULSE OSS COLOR OFF SLOT 1 SLOT 2 SLOT 3 POWER A B C D E F VOLUME MENU BLUE ASPECT AREA INPUT SELECT CHECK MARKER 2 3 4 5 6 7 9 10 11 12 16 17 18 19 20 21 22 23 UNDER PULSE COLOR DEGAUSS SCAN CROSS OFF POWER SLOT 1 SLOT 2 SLOT 3 A B C D E F MENU SCREENS ASPECT AREA INPUT SELECT VOLUME CHECK MARKER 13 14 15 8 8 1 Tally lamp MENU button Lights when the tally control signal is ON. The tally control Displays, adjusts or closes a
Краткое содержание страницы № 5
REAR/SIDE VIEW REMOTE MAKE RS-232C 24 25 28 26 MAIN POWER 27 Refer to pages 8 and 9 for correspondence between the 12 COLOR OFF button/lamp input terminals and the INPUT SELECT buttons. Press the COLOR OFF button. The button lights and the screen becomes monochrome. When the COLOR OFF 22 Power lamp button is pressed while lit, the light goes off and the Unlit : The main power is OFF. normal screen is restored. Orange : The main power is ON, but the monitor’s power Use t
Краткое содержание страницы № 6
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG) Video input/output terminals 1 Input (IN) and output (OUT) terminals for component (color deference) or RGB signals. G/Y The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the IN OUT input signal is automatically terminated.) B/PB/B-Y Select component signal : press INPUT SELECT A/C/E 1 button IN OUT Select RGB signal : press INPUT SELECT B/D/F R/PR/B-Y but
Краткое содержание страницы № 7
SDI INPUT CARD (OPTIONAL: IF-C01SDG) 1 Output terminal for a selected component serial digital signal SWITCHED Output terminal for s selected digital signal (the input OUT displayed on the screen). The output signal is cable- 1 compensated. NOTE: When the monitor’s power is OFF, no digital IN SDI 1 signal is output. 2 Input terminals for component serial digital 2 IN SDI 2 signals 4 Input terminals for the digital signal. Select SDI 1 : press INPUT SELECT A/C/E button A UDIO 1 Select SDI 2 : p
Краткое содержание страницы № 8
PREPARATION INSTALLING THE INPUT ATTACHING THE WIDE CARD MASK Optional input cards are necessary to use the functions of this A wide mask is provided with the monitor. This changes the monitor. Before mounting the monitor or connecting other viewable screen area to the 16:9 aspect ratio. equipment to the monitor, be sure to install the input cards. The wide mask cannot be attached to the monitor after the monitor is mounted in a rack. Mount the wide mask before 1. Turn off the Multi-Format M
Краткое содержание страницы № 9
BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) ABOUT MENU SCREENS BASIC MENU OPERATION This monitor features a MAIN MENU (main menu screen) and ● To select an item, a SETUP MENU (setup menu screen). Press the or buttons to move the cursor (4) on the The MAIN MENU contains the functions normally used, and Menu Screens and select the desired item. the SETUP MENU contains the settings required for initial ● To set (select) or adjust an item, setup. Press the or buttons to select or adjust th
Краткое содержание страницы № 10
HOW TO USE “MAIN MENU” “MAIN MENU” ITEMS The following items appear in MAIN MENU. Items Functions Displays 1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal. *1 2 SLOT CONDITION Displays the status of the input cards installed in each of the input card slots. 3 sub menu POSITION Selects the display position of the sub menu superimposed on the screen. 4 AREA MARKER Selects the size marker for the other screen ratio used when the screen *2 ratio is 16:9. 5 AR
Краткое содержание страницы № 11
ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. APERTURE CONTROL 3. sub menu POSITION Compensates the frequency Items : Selects the display position of the sub menu characteristics of the input superimposed on the screen. LEVEL :00 video signal. Press the CONTROL FREQ. :HIGH Settings : UPPER/LOWER sub menu reset button to display the setting Functions : UPPER : An adjustment item is displayed on the menu illustrated on the right. top of the screen. NOTE :A
Краткое содержание страницы № 12
5. AREA MARKER-R R-Y PHASE 90 Items : Selects the size marker for the other screen ratio R/B GAIN 0.79 (aspect) used when the screen ratio is 16:9. (for ITU601 external control) G-Y PHASE 244 Settings : OFF/4:3/16:9/14:9/13:9/MODE 1/MODE 2 G/B GAIN 0.45 Functions : OFF: The marker is not displayed. R-Y PHASE 90 4:3/16:9/14:9/13:9: Displays the marker (a white quadrangle) showing the screen size of each R/B GAIN 0.86 ITU709 aspect ratio. G-Y PHASE 244 MODE 1/MODE 2: Displays no markers because G/
Краткое содержание страницы № 13
HOW TO USE “SETUP MENU” “SETUP MENU” ITEMS Items Functions 1 FUNCTION SETTING Displays the monitor’s power-up time or the total usage time. 2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel. 3 COLOR TEMP./BAL. Sets or adjusts the color temperature or white balance. 4 SIZE/POSI. ADJ. Adjusts the size or position of the picture. 5 DISTORTION ADJ. Compensates the picture distortion. 6 STATUS DISPLAY Makes the status of the input signal appear or disapp
Краткое содержание страницы № 14
HOW TO USE “SETUP MENU” (cont'd) ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. FUNCTION SETTING Item : CONTRAST Selects the color system and Adjustment displays the monitor’s power- range : –20 ~ 00 ~ +20 COLOR SYSTEM :AUTO up time or the total usage time. RUSH DELAY TIME :STD. Function : For approximate adjustment of the picture HOUR METER X100h :000 Press the button to display contrast. Before adjustment, set the CONTRAST the setting menu illustrated on
Краткое содержание страницы № 15
3. COLOR TEMP./BAL. 4. SIZE/POSI. ADJ. Sets or adjusts the color Adjusts the size or position of temperature or white balance. the picture. Press the COLOR TEMP. :LOW H.SIZE :00 Press the button to display button to display the setting BLUE DRIVE :000 H.POSITION :00 RED DRIVE :000 V.SIZE :00 the setting menu illustrated on menu illustrated on the right. GREEN CUTOFF :000 V.POSITION :00 BLUE CUTOF
Краткое содержание страницы № 16
5. DISTORTION ADJ. 6. STATUS DISPLAY Compensates the picture Makes the status of the input distortion. Press the button signal appear or disappear on STATUS DISPLAY :ON PINCUSHION :00 to display the setting menu the screen. Press the 1080/1035 :1080 PIN.BALANCE :00 PARALLELOGRAM :00 illustrated on the right. button to display the setting TRAPEZOID :00 sub menu menu illustrated on the right. reset EXIT: MENU ADJUST:- +
Краткое содержание страницы № 17
HOW TO USE EXTERNAL CONTROL ABOUT EXTERNAL CONTROL This multi-format monitor has two external control terminals. One is the MAKE terminal, which controls the monitor by connecting the terminals with many functions to the ground (GND) terminal. The other is the RS-232C terminal, which allows the monitor to be controlled by a PC via serial communication. Control priority is in the following order; the MAKE terminal > the RS-232C terminal > the buttons on the front panel. HOW TO USE THE MAKE TE
Краткое содержание страницы № 18
HOW TO USE EXTERNAL CONTROL (cont.) HOW TO USE THE RS-232C TERMINAL You can control the monitor from your PC via the RS-232C terminal. For details on operating the monitor from the PC, consult your dealer or service center for details. 5 9 4 8 1. Cable 3 7 2 Prepare a straight cable with a D-sub connector (9-pin, female) and a D-sub 6 1 connector (9-pin, male) 2. Communications Specifications Baud Rate : 4800/9600/19200 (factory pre-set; 4800) Pin No. Signal Data Bits : 8 bits 1 DCD (Data Carr
Краткое содержание страницы № 19
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Reference Problems Points to be checked Measures (Remedy) pages No power supply Is the power plug loosened or Firmly insert the power plug. 5 disconnected? No picture with Is the signal cable disconnected? Connect the signal cable firmly. 6, 7 the power on Is the
Краткое содержание страницы № 20
TROUBLESHOOTING (cont.) Reference Problems Points to be checked Measures (Remedy) pages Irregular color Is the monitor placed or moved close to Move the device away from the monitor. Press the DEGAUSS button on the front panel to a speaker or any other device degauss the screen. 4 incorporating a magnet? When degaussing, wait more than 30 minutes for Has the position of the monitor been changed with the power on? maximum effect. Wrong picture Has the picture position, size or Adjust the picture
