Краткое содержание страницы № 1
OWNER’S MANUAL
Model Number H348SL
Product No. 960 73 00-02
48 Inch Mower
Grass Catcher
• Assembly
� Operation
� Customer Responsibilities
� Repair Parts
532411504 Rev. 1 03.02.07 BY Printed in U.S.A.
03056
Краткое содержание страницы № 2
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. � Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- WARNING: In order to prevent ac- lated injuries. These operators should evaluate their ci den tal starting when setting up, abilit
Краткое содержание страницы № 3
SAFETY RULES Safe Operation Practices for Ride-On Mowers IV. TOWING machine. Repair, if necessary, before restarting. � Never make any adjustments or repairs with the engine � Tow only with a machine that has a hitch designed for run ning. towing. Do not attach towed equipment except at the � Check grass catcher components and the discharge hitch point. guard frequently and replace with manufacturer's rec- � Follow the manufacturer's recommendation for weight ommended parts, whe
Краткое содержание страницы № 4
KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference. The operation of any tractor can result in foreign obje
Краткое содержание страницы № 5
ASSEMBLY 3. Align support assembly pin with hole in drawbar and BAGGER SUPPORT ASSEMBLY 1 hang assembly over the shoulder bolts. 4. Be sure support assembly is seated properly and secure Determine which type drawbar you have on your tractor. with retainer spring supplied. Compare the drawbar illustrations below to the drawbar SHOULDER located at the rear of your tractor. BOLTS Follow the support assembly instructions that apply to your type drawbar. SUPPORT ASSEMBLY DRAWBAR
Краткое содержание страницы № 6
03022 MOUNTING COVER ASSEMBLY TO CONTAINER MOUNTING (See Fig. 3) 2 SUPPORT ASSEMBLY (See Fig. 2) 3 1. Install one container to left side fi rst. Install another NOTE: For ease of assembly, you may wish to obtain the container to center position and one in right position. as sis tance of another person for mounting cover assembly to tractor. NOTE: Left edge of right con tain er should always over lap right edge of left con tain er at center supports. 1. Position cover assembly on grou
Краткое содержание страницы № 7
LOWER CHUTE (See Fig. 4) UPPER CHUTE (See Figs. 5A and 5B) 4 5 1. Raise and hold defl ector shield in upright position. 1. Lower mower to its lowest cutting position. 2. Place slot in lower chute over mounting tab on mower 2. Assemble upper chute by inserting curved end into and position lower chute over mower opening as hole in back of cover. shown. TIP: Holding upper chute as shown and twisting while 3. Hook rear latch into fl ange hole on back of mower. installing in cover wil
Краткое содержание страницы № 8
OPERATION � Your bagger is equipped with a full bagger indicator. TIPS FOR IMPROVED BAGGING Movement of the wheel increases as the bags fi ll. The OPE RATION: wheel will be spinning fastest just before the bags fi ll Follow the mower operation instructions in your tractor completely. When the wheel stops, it indicates that the owner's manual. bags are full and the chutes have become clogged. When operating your grass catcher on a lawn where grass NOTE: To help prevent clogging of chute
Краткое содержание страницы № 9
CUSTOMER RESPONSIBILITIES GENERAL RECOMMENDATIONS CAUTION: Grass catcher components Always observe safety rules when performing any main- are subject to wear, damage and te nance. deterioration, which could expose moving parts or allow objects � Before each use check for loose fasteners. to be thrown. Frequently check � Clean unit thoroughly after each use. components and replace with manufacturer's recommended parts, BLADE CARE when necessary. For best results mower blades must
Краткое содержание страницы № 10
REPAIR PARTS GRASS CATCHER - MODEL NUMBER H348SL (PRODUCT NO. 960 73 00-02) 5 6 4 7 3 8 20 10 9 18 11 20 2 2 15 20 38 9 16 38 12 13 14 20 34 15 33 9 12 37 26 14 16 32 31 33 31 31 29 28 29 35 1 30 KEY PART NO. NO. DESCRIPTION KEY PART 1 532401047 Adapter NO. NO. DESCRIPTION 2 532069180 Nut, Crown lock #10-24 3 532192709 Screen, Cover 20 871161010 Screw #10-24 x 5/8 4 532195373 Cover Assembly (
