Краткое содержание страницы № 1
Краткое содержание страницы № 2
Краткое содержание страницы № 3
DECT 215 master UK indice 1.qxd 30/08/2004 15:42 Page 1 Installing your telephone Inserting / Replacing battery pack / Telephone connection Warning:To insert battery pack and /or to connect your telephone, please refer to the drawings printed on the inside cover. With the help of the installation drawings : 1.- Plug the line cord (A) into the line socket on your DECT 211 or DECT 215 base station. Plug the power cable (B) into the power socket on your DECT 211 or DECT 215 base station. Plug
Краткое содержание страницы № 4
DECT 215 master UK indice 1.qxd 30/08/2004 15:42 Page 2 Environment & Safety Safety information : This equipment is not designed for making emergency calls when the power fails.An alternative should be made available for access to emergency calls. Power requirements : The product requires an electrical supply of 220-240 volts, single phase alternating current, excluding IT installations defined in standard EN 60-950. WARNING ! The electrical network is classified as dangerous according to
Краткое содержание страницы № 5
DECT 215 master UK indice 1.qxd 30/08/2004 15:42 Page 3 DECT 211 & DECT 215 Handsets DECT 211 DECT 215 Keypad Talk key p 5 Phonebook keys p 6 Call log key p 7 Redial list & correction key p 5 Validation and intercom key p 8 Loudspeaker key (DECT 211) p 5 Loudspeaker/Answerphone key (DECT 215) p 5 Programming and recall type key p 14 Volume key p 5 www.philips.com/faqs/dect 3
Краткое содержание страницы № 6
DECT 215 master UK indice 1.qxd 30/08/2004 15:43 Page 4 DECT 211 & DECT 215 Base Stations Screen Icons Answerphone settings / Answerphone On (DECT 215 only) p 9 Handset ringer settings p 13 Handset registering / unregistering p 14 Technical settings p 14 Message indicator on answerphone (DECT 215 only) p 9 Battery charge status : charge in progress - fully charged - low p 1 Call log / Voicemail Box p 7 Loudspeaker p 5 Friend phonebook p 6 Call in progress - Internal call p 8 Family phonebook
Краткое содержание страницы № 7
DECT 215 master UK indice 1.qxd 30/08/2004 15:43 Page 5 Using the telephone Making a call Answering a call / Hanging up flashes answer the call. on an To end the conversation, press the key again or replace the handset on the incoming base station. call.or if the Calling directly answerphone DECT 215 is dial the phone number. on line. Predialling the number before calling To correct Dial the phone number entries use Calling from a phonebook . or or to scroll through the list Adjusting
Краткое содержание страницы № 8
DECT 215 master UK indice 1.qxd 30/08/2004 15:43 Page 6 Storing one of the redial list numbers into one of your phonebooks or or beep enter to scroll through the redial list the name Number correction corrects : a digit when predialling, a digit or a character when entering names in the phonebooks. A long press on aborts any procedure in progress. Creating and changing phonebook entries The telephone has two phonebooks : You can also A 20-entry family phonebook (see VIP feature p.13) crea
Краткое содержание страницы № 9
DECT 215 master UK indice 1.qxd 30/08/2004 15:43 Page 7 Using the call log This feature is available if you have registered to the caller identification service with your operator. The call log stores the last 10 external calls received : flashes if - answered calls there is a new - unanswered calls message on - Voicemail box service information* the Voicemail - messages from your answerphone (DECT 215 only) ( ). box.(subject to a * Subject to a subscription with your operator. subscription w
Краткое содержание страницы № 10
DECT 215 master UK indice 1.qxd 30/08/2004 15:43 Page 8 Using the intercom This function can only be used with a multi-handset configuration. It allows you to Intercom & make free internal calls and transfer external calls from one handset to another. call transfer Internal call are only possible with short press to call all the handsets in idle mode. handsets* long press, enter the handset number (1 to 4) to call the selected registered to the same base handset in idle mode. station. * If t
Краткое содержание страницы № 11
DECT 215 master UK indice 1.qxd 30/08/2004 15:43 Page 9 Using your answerphone Setting up the answerphone The answerphone is by default activated with a pre-recorded message and the answer & record mode. Recording capacity : 9 min. (standard quality) - 6 min (high quality) : including personal outgoing message if recorded. Activating the answerphone icon is beep on. To exit Deactivating the answerphone beep icon is To exit off. Playing new messages / playing a memo icon .You can adjust t
Краткое содержание страницы № 12
DECT 215 master UK indice 1.qxd 30/08/2004 15:44 Page 10 Recording your personal outgoing message *You will hear the personal * speak after the beep outgoing To exit message. However, if you do so, you will permanently erase the pre-recorded outgoing message. This local Recording a memo message If you want to leave a local message for your family : (memo) is speak after the beep treated like all other To exit answerphone Selecting the answerphone mode messages. You can select either ans
Краткое содержание страницы № 13
DECT 215 master UK indice 1.qxd 30/08/2004 15:44 Page 11 Remote access This allows you to remotely dial in and access your answerphone via any telephone with a key and tone dialling. RC Remotely activating the answerphone (Registration Code) code is Dial your phone number enter the RC Code* written under after 9 rings and a beep to activate the base. Remotely deactivating the answerphone * or enter your personal Dial your phone number enter the RC Code* Remote during the outgoing message
Краткое содержание страницы № 14
DECT 215 master UK indice 1.qxd 30/08/2004 15:44 Page 12 Customising the telephone Programming the phone To enter the programming mode press . Use Icons representing the menus will then be displayed on the screen : and to Réglages répondeur (uniquement pour le DECT 215) navigate within the menus. Volume and melody settings (VIP melodies*) Icons : flashing Handset registering to select the menu and Other settings steady on once entered in the Once the menu is selected with and keys, press to
Краткое содержание страницы № 15
DECT 215 master UK indice 1.qxd 30/08/2004 15:44 Page 13 Changing Remote Access Code (option 4/5) To remotely access your answerphone you need to enter a secret code (4 digits). By default, this code is identical to the RC code written under the base. If you want to change the default code : Enter a personal code and press to validate. Note : You can delete with your Remote Access Code. If this code has been deleted, the remote-activation of : the answerphone is not possible. Choosing the r
Краткое содержание страницы № 16
DECT 215 master UK indice 1.qxd 30/08/2004 15:44 Page 14 Handsets registering / unregistering ( ) 4 handsets can be registered to the base station. A handset can only be associated with 1 base station. To register another handset First enter registration mode by unplugging and plugging back in the power adapter to the electricity supply. Once the menu is selected, enter the RC* code written under the base and press to confirm. Warning : If you wish to associate a non-Philips handset to the D
Краткое содержание страницы № 17
DECT 215 master UK indice 1.qxd 30/08/2004 15:44 Page 15 Changing recall type (flash setting) The use of some services accessed with (call waiting, call forward...) will depend on the flash setting (Short/Long) according to your installation type (Public, : Short . PABX). (country dependent) :Long. or to choose between Short or Long Troubleshooting Telephone troubleshooting..... Please read this user guide carefully before calling your Philips Customer Care Center. IF NEEDED, check that t
Краткое содержание страницы № 18
DECT 215 master UK indice 1.qxd 30/08/2004 15:44 Page 16 Answerphone troubleshooting..... PROBLEMS CAUSES SOLUTIONS - Answerphone icon is The answerphone memory is full Consult and delete messages to blinking on the display. free sufficient memory. (p 9) - The answerphone has not The answerphone memory is full. Consult and delete messages to recorded your outgoing free sufficient memory. (p 9) message. - The answerphone has The answerphone memory is full. Consult and delete messages to stopp
Краткое содержание страницы № 19
Краткое содержание страницы № 20
