Руководство по эксплуатации Geemarc Dallas 10

Краткое содержание страницы № 1

D D D D DALLAS ALLAS ALLAS ALLAS ALLAS 10 10 10 10 10
User guide
If you are using this telephone with a hearing aid, set your
hearing aid to the «T» setting
T.B.A.
T elephone

Краткое содержание страницы № 2

SETTINGUP 1 - CONNECTING TELEPHONE 1 - Connect the handset cord. 2 - Connect the line cord to the socket located at rear of telephone then connect the PTT plug*. T.B.A. Drawing description (*) Classified TNV-3 according to EN60950 standard.

Краткое содержание страницы № 3

SETTINGUP 2 - RINGER SETTINGS A switch located on right side allows the ringer to be switched On ( ) or Off ( ). 3 - WALL MOUNTING To wall-mount your telephone,slide out the clip turn around and slide back into the wall mounting posi- tion (located in the base unit, just below the ear piece).This will ensure that the handset stays firmly in position. Make 2 holes in the wall 85mm apart, insert the wall plugs and the wall mounting screws. The screws should protrude from wall by 6-7 mm. Place t

Краткое содержание страницы № 4

USINGTHEPHONE 1 - ANSWERING INCOMING CALL - When an incoming call is received the phone will ring and flash. To answer the call lift the handset and speak. - On completion of the call, carefully replace the handset in the cradle to release the line. 2 - VOLUME RECEIVING ADJUSTMENT You can increase the volume according to your own hearing requirements. Use the VOL button, located on the right side, to adjust the level according to your own hearing requirements. VOL 0dB +15dB

Краткое содержание страницы № 5

USINGTHEPHONE 3 - MAKING A CALL - Lift the handset. - Await the dial tone and dial required number. - On completion of the call, carefully replace the handset in the cradle. 4 - SENDING LEVEL ADJUSTMENT If your voice is quiet or called parties have difficulty hearing you, you can increase the sending level volume with the switch located on the right side. 0dB +4dB 5 - LAST NUMBER REDIAL - Lift the handset. - Await the dial tone and press button. - The previously dialled number will be automati

Краткое содержание страницы № 6

USINGTHEPHONE 6 - R, * & # BUTTONS These are used with the new services provided on digital exchanges. For details please contact your network operator. 7 - STORING TELEPHONE NUMBERS Your phone can store 3 direct and 10 indirect memories (16 digits maximum for each memory). - Lift the handset. - Press button. - Dial the telephone number you wish to store. - Press button. - Press one of the direct memory buttons, M1, M2, M3. Or press MEM and any button 0 to 9 on the key pad under which you wish

Краткое содержание страницы № 7

USINGTHEPHONE Note : Numbers will be lost if you disconnect your phone. Entering a new number in memory will automatically erase the previous number. 8 - DIALLING STORED NUMBER - Lift the handset and await the dial tone. - Press appropriate direct memory button M1, M2, or M3. The stored number will be dialled out automatically. Or press the MEM button followed by the keypad 0 to 9 button under which the desired number is stored. The stored number will be dialled out automatically. To register yo

Краткое содержание страницы № 8

GUARANTEE From the moment your Geemarc product is purchased, Geemarc guarantee it for the period of one year. During this time, all repairs or replacements (at our option) are free of charge.Should you experience a problem then contact our helpline or visit our website at www.geemarc.com.The guarantee does not cover accidents, negligence or breakages to any parts. The product must not be tampered with or taken apart by anyone who is not an authorised Geemarc representative.The Geemarc guarante