Краткое содержание страницы № 1
SmartSwitch 9000
9G421-02/9G429-02
Gigabit Ethernet Interface Module
User’s Guide
9032344-02
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Notice Notice Cabletron Systems reserves the right to make changes in speciÞcations and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made. The hardware, Þrmware, or software described in this manual is subject to change without notice. IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEV
Краткое содержание страницы № 4
Notice FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable p
Краткое содержание страницы № 5
Notice Safety Information CLASS 1 LASER TRANSCEIVERS The 9G429-02 is a Class 1 Laser Product The 9G429-02 uses a Class 1 Laser transceiver. Read the following safety information before installing or operating these adapters. The Class 1 laser transceivers use an optical feedback loop to maintain Class 1 operation limits. This control loop eliminates the need for maintenance checks or adjustments. The output is factory set, and does not allow any user adjustment. Class 1 Laser
Краткое содержание страницы № 6
Notice Declaration of Conformity Addendum Application of Council Directive(s): 89/336/EEC 73/23/EEC ManufacturerÕs Name: Cabletron Systems, Inc. ManufacturerÕs Address: 35 Industrial Way PO Box 5005 Rochester, NH 03867 European Representative Name: Mr. J. Solari European Representative Address: Cabletron Systems Limited Nexus House, Newbury Business Park London Road, Newbury Berkshire RG14 2PZ, England Conformance to Directive(s)/Product Standards: EC Directive 89/336/EEC
Краткое содержание страницы № 7
Contents Contents Chapter 1 Introduction Features........................................................................................................................... 1-3 Related Manuals............................................................................................................ 1-4 Getting Help .................................................................................................................. 1-5 Chapter 2 Installation Tools Needed ..................
Краткое содержание страницы № 8
Contents Chapter 4 LANVIEW LEDs Appendix A Specifications Technical SpeciÞcations...............................................................................................A-1 CPU .........................................................................................................................A-1 Memory ..................................................................................................................A-1 Network Interfaces ............................................
Краткое содержание страницы № 9
Chapter 1 Introduction The 9G421-02/9G429-02 (Figure 1-1) is a Gigabit Ethernet interface module, occupying a single slot in the SmartSwitch 9000 chassis. Gigabit Ethernet networks are connected to the 9G421-02/9G429-02 through front panel ports. These ports interface with the switch through Gigabit Network Interface Blocks (GNIB) and are based upon an ASIC architecture. The module connects to the Internal Network Bus (INB) B, providing a high speed backplane for communication amon
Краткое содержание страницы № 10
Introduction SMB CPU INB E N E T 1 E N E T 2 Figure 1-1. The 9G421-02/9G429-02 Module 1-2
Краткое содержание страницы № 11
Introduction Features Processor The 9G421-02/9G429-02 is equipped with an advanced Intel i960 microprocessor. This microprocessor provides a platform for all management functions, such as Spanning Tree, RMON, and MIB support within a scalable RISC-Based architecture. Fast Packet Switching The 9G421-02/9G429-02 incorporates a hardware-based switch design referred to as the SmartSwitch ASIC, a collection of custom ASICs designed speciÞcally for high-speed switching. Management The
Краткое содержание страницы № 12
Introduction Management Information Base (MIB) Support The 9G421-02/9G429-02 provides MIB support including ¥ RMON (RFC 1271) ¥ IETF MIB II (RFC 1213) ¥ IETF Bridge MIB (RFC 1493) and a host of other Cabletron Enterprise MIBs. For a complete list of supported MIBs, refer to the release notes provided in the NOTE 9G421-02/9G429-02 package. LANVIEW LEDs ¨ The 9G421-02/9G429-02 uses LANVIEW , the Cabletron Systems built-in visual diagnostic and status monitoring system. With LANVIEW L
Краткое содержание страницы № 13
Introduction Getting Help For additional support related to this device or document, contact Cabletron Systems using one of the following methods: World Wide Web http://www.cabletron.com/ Phone (603) 332-9400 Internet mail support@cabletron.com FTP ftp://ftp.cabletron.com/ Login anonymous Password your email address To send comments or suggestions concerning this document, contact the Cabletron Systems Technical Writing Department via the following email address: TechWriting@cab
Краткое содержание страницы № 14
Introduction 1-6
Краткое содержание страницы № 15
Chapter 2 Installation This chapter describes the physical layout of the 9G421-02/9G429-02 module and explains preparation and installation procedures for use in a SmartSwitch 9000 chassis. The 9G421-02/9G429-02 occupies a single slot in the SmartSwitch 9000 chassis. Install the 9G421-02/9G429-02 by following the steps in Unpacking the Module below. Only qualiÞed personnel should perform installation procedures. ! Never expose the moduleÕs components to Electrostatic Discharge.
Краткое содержание страницы № 16
Installation Physical Layout The 9G421-02/9G429-02 has two major circuit boards on which components are attached (see Figure 2-1). The base-level circuit board is known as the motherboard and the second-level circuit board is known as the daughterboard. The removable daughterboard attaches to the motherboard with connectors and standoffs. Both the motherboard and the daughterboard contain components accessible to the user. Daughterboard Motherboard Figure 2-1. The 9G421-02/9G429-02 Cir
Краткое содержание страницы № 17
12 3 4 5 6 7 8 Installation User Accessible Daughterboard Components The user accessible components are located on the underside of the daughterboard. These components include an eight-position DIP switch, a replaceable SMB-1 PROM, a replaceable BOOT PROM, and sockets for DRAM and FLASH memory. You can access the DIP switch without removing the daughterboard. However, to access the other components on the daughterboard, you must remove the daughterboard from the motherboard. DIP Sw
Краткое содержание страницы № 18
Installation Table 2-1. Function of DIP Switch Switch Function Description When toggled, this switch clears user-entered Clear passwords stored in NVRAM, and restores the 8 1 Password default passwords. Once the passwords are reset, you can use the defaults or enter new passwords. The module uses NVRAM to store user- entered parameters such as IP addresses, device name, etc. To reset these parameters to the factory defaults, Clear 7 toggle this switch. Once reset, you can u
Краткое содержание страницы № 19
Installation Removing the Daughterboard from the Motherboard Perform the following steps to remove the daughterboard: 1. Place the module (component side up) on a non-conductive, ßat surface with the front (faceplate) to the left. The daughterboard abuts the backplane connectors (see Figure 2-1). 2. Locate the nine screws as shown in Figure 2-3. Securing Screws Figure 2-3. Daughterboard Attached to the 9G421-02/9G429-02 2-5
Краткое содержание страницы № 20
Installation 3. Use a Phillips screwdriver to remove the screws and set the screws aside. 4. Carefully grasp the daughterboard and lift up. 5. Turn the daughterboard over to reveal the user-accessible components illustrated in Figure 2-4. SMB-1 PROM BOOT PROM FLASH SIMM slot DRAM SIMM slot DIP Switch Figure 2-4. User-Accessible Components on Underside of 9G421-02/9G429-02 Daughterboard 2-6
