Краткое содержание страницы № 1
5-Port Gigabit Switch
8-Port Gigabit Switch
Belkin Tech Support Belkin Ltd.
US: 877-736-5771 7 Bowen Crescent, West Gosford
310-898-1100 ext. 2263 NSW 2250, Australia
Europe: 00 800 223 55 460 +61 (0) 2 4372 8600
Australia: 1800 235 546 +61 (0) 2 4372 8603 fax
New Zealand: 0800 235 546
Singapore: 800 616 1790 Belkin B.V.
Boeing Avenue 333
Belkin Corporation 1119 PH Schiphol-Rijk, The Netherlands
501 West Walnut Street +31 (0) 20 654 7300
Los Angeles, CA 90220-5221, USA +31 (0) 20 654 7349 fax
3
Краткое содержание страницы № 2
5-Port Gigabit Switch 8-Port Gigabit Switch Share large files at faster network speeds, with maximum efficiency � � � � � � � � � � � � User Manual � � � � � � � � � � � F5D5141-5 F5D5141-8 � � � � � � � � � � � � � � � � � � � � � � � � � ���� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ���� � � � � � � � � �
Краткое содержание страницы № 3
Table of Contents 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Getting to Know your Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Connecting Networking Devices to your Switch. . . . . . . . . . . . . . . . 4
Краткое содержание страницы № 4
section Introduction Congratulations on your purchase of this high-quality Belkin 5- or 1 8-Port Gigabit Switch. Backward-compatible with 10/100 networks, each Switch easily integrates into a new or existing network for instant high performance. It delivers dedicated 100Mbps links to 2 each directly attached LAN segment or PC, enabling your servers and workstations to transfer large AV and graphic files efficiently 3 throughout your network. They provide your servers and workstations the c
Краткое содержание страницы № 5
I In nt tr ro od du uc ct ti io on n Features - High-speed, dedicated 10/100/1000 Ethernet ports • 5 ports (Belkin 5-Port Gigabit Switch F5D5141-5) • 8 ports (Belkin 8-Port Gigabit Switch F5D5141-8) - Standards • IEEE 802.3 z/ab 1000Base-T • IEEE 802.3u 100Base-Tx • IEEE 802.3 10Base-T - 1U chassis, place on your desk or mount on a wall - Auto MDI/MDIX ports - Auto-negotiation between 10-, 100-, and 1000Mbps on all ports - Auto-negotiation for full and half duplex on all ports - Colli
Краткое содержание страницы № 6
section I In nt tr ro od du uc ct ti io on n Getting to Know your Switch 1 Front-Panel LEDs Belkin 5- or 8-Port Gigabit Switches feature two rows of LEDs that 2 provide information about connection speed and activity, plus a separate Power LED. 3 (b) 4 � � � � � � � � 5 6 (a) (c) (a) Power (POWER) LED 7 • Green – Switch is operating normally • Off – There is no power to the Switch 8 (b) Speed, Link, and Activity (Link/Act) LED • Solid Green – A valid link has been established • Blinking Gree
Краткое содержание страницы № 7
C Co on nn ne ec ct ti in ng g N Ne et tw wo or rk ki in ng g D De ev vi ic ce es s t to o y yo ou ur r S Sw wi it tc ch h Connecting your Switch to your Computers 1. Power down all your equipment. 2. Connect a Category 5e or 6 Ethernet cable between each computer’s network interface card (NIC) and one of the numbered ports on the front of the Switch. 3. All switch ports can automatically negotiate speeds at full- and half-duplex modes to allow users to attach 10Base-T, 100Base-Tx, and 1
Краткое содержание страницы № 8
section Connecting Networking Devices to your Switch 1 Connecting your Switch to your Broadband Router 1. Make sure your broadband router is correctly configured to 2 connect to your ISP and you are able to surf the Internet. Note: If have questions regarding the configuration of your 3 broadband router setup, consult your broadband router vendor. 2. Connect a Category 5e or 6 Ethernet cable between one of the numbered ports on the rear of the broadband router and one of 4 the numbered ports
Краткое содержание страницы № 9
Connecting Networking Devices to your Switch Connecting your Switch to another Switch 1. Connect a Category 5e or 6 cable between one of the numbered ports on the front of the Switch and one of the numbered ports on the other Switch to which you are cascading or connecting. 2. All switch ports can automatically negotiate speeds at full- and half-duplex modes to allow users to attach 10Base-T, 100Base-Tx, and 1000Base-T network switches or hubs. 3. All ports support auto MDI and MDIX function
Краткое содержание страницы № 10
section Applications 1 This Switch segments your network, significantly increasing both bandwidth and throughput. Each port on the Switch can be attached to any Ethernet, Fast Ethernet, or Gigabit Ethernet device, such as 2 another switch or a server’s network adapter. All Switch ports operate at 10/00Mbps full and half duplex, or 1000Mbps full duplex, providing 3 up to 2Gbps of bandwidth to the attached device. Bridging Functions – 4 This Switch provides fully transparent bridging functio
Краткое содержание страницы № 11
Placement of the Switch The Switches can be placed on a flat surface or on the wall. Placement on a Flat Surface 1. Affix the four rubber feet shipped with the Switch on the bottom of the Switch in the area that is clearly marked on each of the four corners. 2. Make sure the Switch is placed in an area that allows for proper ventilation. 3. Place on a flat surface. Placement on the Wall 1. The wall-mount slots are two keyholes on the bottom of the Switch. Attach two screws to the wall so tha
Краткое содержание страницы № 12
section Product Specifications 1 2 3 4 P P Ph h hy y ys s si i ic c ca a al l l C C Ch h ha a ar r ra a ac c ct t te e er r ri i is s st t ti i ic c cs s s Standards Conformance IEEE Std 802.3-2002 5 Communication Rate 10/100/1000Mbps Communication Mode F ull or half duplex at 10/100Mbps 6 Full duplex at 1000Mbps Media Supported 10Base-T: 100-Ohm Category 3 or better twisted-pair 7 100Base-Tx: 100-Ohm Category 5 or better twisted-pair 8 1000Base-T: 100-Ohm Category 5, 5e, or 6 twisted-pair N
Краткое содержание страницы № 13
Product Specifications Switching Criteria Network Bridging Function Filtering, forwarding, and learning Switching Method Store-and-forward MAC Address Table F5D5141-5: 8K entries F5D5141-8: 8K entries Packet Buffer F5D5141-5: 80Kbits F5D5141-8: 128Kbits 10 11
Краткое содержание страницы № 14
section Troubleshooting Diagnosing Switch Indicators 1 Symptom Power LED does not light after power on. 2 Probable Causes DC power adapter may be defective. 3 Possible Solutions • Check for loose connections. 4 • Check the power outlet by using it for another device. • Replace the DC power adapter. 5 Symptom 6 Port (link) LED does not light after connection is made. Probable Causes 7 Switch port, network card, or cable may be defective. Possible Solutions 8 • Check that the Switch and atta
Краткое содержание страницы № 15
Troubleshooting Power and Cooling Problems If the power indicator does not turn on when the power cord is plugged in, you may have a problem with the power outlet, power cord, or internal power supply as explained in the previous section. However, if the unit powers off after running for a while, check for loose power connections, power losses or surges at the power outlet, and verify that the fans on the right side of the unit are unobstructed and running prior to shutdown. If you still
Краткое содержание страницы № 16
section Information EMI Certification 1 FCC Class B Certification (USA) Warning: This equipment generates, uses, and can radiate radio 2 frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class 3 B digital device pursuant to Subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection against such 4 interference when
Краткое содержание страницы № 17
I In nf fo or rm ma at ti io on n Immunity: • Product family standard according to EN 55024:1998 • Electrostatic Discharge according to EN 61000-4-2:1995 (Contact Discharge: ±4kV, Air Discharge: ±8kV) • Radio-frequency electromagnetic field according to EN 61000-4- 3:1996 (80–1000MHz with 1kHz AM 80% Modulation: 3V/m) • Electrical fast transient/burst according to EN 61000-4-4:1995 (AC/DC power supply: ±1kV, data/signal lines: ±0.5kV) • Surge immunity test according to EN 61000-4-5
Краткое содержание страницы № 18
section Information Safety Compliance 1 Please read the following safety information carefully before installing the Switch: 2 Warning: Do not plug a phone-jack connector into the RJ45 port. This may damage this device. 3 Warning: This product does not contain any serviceable user parts. Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground 4 line to prevent electrical hazards. Caution: Use only twisted-pa
Краткое содержание страницы № 19
I In nf fo or rm ma at ti io on n Belkin Corporation Limited Lifetime Product Warranty What this warranty covers. Belkin Corporation warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin Corporation warrants the Belkin product for the lifetime of the product. What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option,
Краткое содержание страницы № 20
section Information Belkin Corporation reserves the right to review the damaged Belkin product. 1 All costs of shipping the Belkin product to Belkin Corporation for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin 2 Corporation, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of
