Краткое содержание страницы № 1
User’s Guide
July 2002 Mixed-Signal Products
SLOU123A
Краткое содержание страницы № 2
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the t
Краткое содержание страницы № 3
EVM IMPORTANT NOTICE Texas Instruments (TI) provides the enclosed product(s) under the following conditions: This evaluation kit being sold by TI is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY and is not considered by TI to be fit for commercial use. As such, the goods being provided may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety measures typically found in the end product
Краткое содержание страницы № 4
EVM WARNINGS AND RESTRICTIONS It is important to operate this EVM within the supply voltage range of 2.5 V to 5.5 V. Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM. If there are questions concerning the input range, please contact a TI field representative prior to connecting the input power. Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the EVM. Please consult
Краткое содержание страницы № 5
Information About Cautions and Warnings Preface Information About Cautions and Warnings This book may contain cautions and warnings. This is an example of a caution statement. A caution statement describes a situation that could potentially damage your software or equipment. This is an example of a warning statement. A warning statement describes a situation that could potentially cause harm to you. The information in a caution or a warning is provided for your protection. Pleas
Краткое содержание страницы № 6
FCC Warning FCC Warning This equipment is intended for use in a laboratory test environment only. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to subpart J of part 15 of FCC rules, which are designed to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may cause interference with radio communications, in which case the user at his
Краткое содержание страницы № 7
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.1 Feature Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.3 TPA6203A1 EVM Specifications
Краткое содержание страницы № 8
Contents vi
Краткое содержание страницы № 9
Chapter 1 This chapter provides an overview of the Texas Instruments (TI) TPA6203A1 MicroStar Junior BGA audio amplifier evaluation module (SLOP369). It includes a list of EVM features, a brief illustrated description of the module, and a list of EVM specifications. Topic Page 1.1 Feature Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 10
Feature Highlights 1.1 Feature Highlights The TI TPA6203A1 audio amplifier evaluation module and the TI plug-n-play audio amplifier evaluation platform include the following features: TPA6203A1 Low-Voltage Audio Power Amplifier Evaluation Module 2 mm x 2 mm MicroStar Junior BGA Fully differential amplifier Single channel, bridge-tied load (BTL) 2.5-V and 5.5-V operation 1.25-W output power into 8 Ω at 5 V, BTL Internal depop and quick start-up circuitry Internal thermal and shor
Краткое содержание страницы № 11
Description 1.2 Description The TPA6203A1 audio power amplifier evaluation module is a complete, low-power single-channel audio power amplifier. It consists of the TI TPA6203A1 1.25-W low-voltage audio power amplifier IC in a very small MicroStar Junior BGA package, along with a small number of other parts mounted on a circuit board that is approximately one and a quarter inches square (see Figure 1–1). Figure 1–1. The TI TPA6203A1 Audio Amplifier Evaluation Module † Due to the very small size
Краткое содержание страницы № 12
TPA6203A1 EVM Specifications related evaluation modules. The EVMs simply plug into the platform, which automatically provides power to the modules, interconnects them correctly, and connects them to a versatile array of standard audio input and output jacks and connectors. Easy-to-use configuration controls allow the platform and EVMs to quickly model many possible end-equipment configurations. There is nothing to build, nothing to solder, and nothing but the speakers included with the platform
Краткое содержание страницы № 13
Chapter 2 Follow the steps in this chapter to prepare the TPA6203A1 audio amplifier EVM for use. Using the TPA6203A1 EVM with the TI plug-n-play audio amplifier evaluation platform is a quick and easy way to connect power, signal and control inputs, and signal outputs to the EVM, using standard connectors. However, the audio amplifier evaluation module can be used stand-alone by making connections directly to the module pins, and it can be wired directly into existing circuits or equ
Краткое содержание страницы № 14
+ VR2 J6 VDD J10 In/Out F2 Right Left + – – + Left J8 Right J9 J7 Out Out Out Out Spk(U2-U4) C3 C2 JP8 U6 JP6 + + LED2 POWER VDD JP7 U2 HP(U5) SUPPLY S3 U2-U4 HP Source U5 U3 U4 JP5 U5 IDD B1 Off On On S1 TP1 S2 Conditioning GND Off Pwr U1 LED1 VCC JP3 D1 Batt JP2 D2 AC/DC (J2) JP1 D3 TEXAS VCC(J1) J3 J5 J4 INSTRUMENTS DC Right Stereo Left SOURCE 1997 In In In J1 D4 J2 VCC AC/DC In In + Precautions 2.1 Precautions Power Supply Input Polarity and Maximum Voltage Always ensure that the polarity an
Краткое содержание страницы № 15
Quick Start List for Platform 2.2 Quick Start List for Platform Follow these steps when using the TPA6203A1 EVM with the TI plug-n-play audio amplifier evaluation platform (see the platform user’s guide, SLOU011, for additional details). Numbered callouts for selected steps are shown in Figure 2–1. Platform preparations 1) Ensure that all external power sources are set to off and that the platform power switch S1 is set to off. 2) Install a TPA6203A1 module in platform sockets U3 and U4 for st
Краткое содержание страницы № 16
Quick Start List for Stand-Alone 2.3 Quick Start List for Stand-Alone Follow these steps to use the TPA6203A1 EVM stand-alone or when connecting it into existing circuits or equipment. Connections to the TPA6203A1 module header pins can be made via individual sockets, wire-wrapping, or soldering to the pins, either on the top or the bottom of the module circuit board. Numbered callouts for selected steps are shown in Figure 2–2. Figure 2–2. Quick Start Module Map 2 5 6 4 ‡ Due to the very small
Краткое содержание страницы № 17
Quick Start List for Stand-Alone 5) Connect the SHUTDOWN pin through a normally open switch to GND. 6) Connect an 8-Ω –32-Ω speaker to the module OUT+ and OUT– pins. Power Up 7) Verify correct voltage and input polarity and set the external power supply to on. The EVM begins operation. 8) Adjust the signal source level as needed. Operation 2-5
Краткое содержание страницы № 18
References 2.4 References 2.4.1 TPA6203A1 EVM Connected for Stereo BTL Output Figure 2–3. TPA6203A1 EVM Connected for Stereo BTL Output 5 VDC Right Audio Input (Right) 5 VDC External Mute Control Left Audio Input (Left) † Due to the very small size of the MicroStar Junior BGA IC package, the standard part number TPA6203A1 is replaced with the code AADI. 2-6
Краткое содержание страницы № 19
TPA6203A1 Audio Power Amplifier Evaluation Module Parts List 2.4.2 TPA6203A1 EVM Schematic Diagram Figure 2–4. TPA6203A1 EVM Schematic Diagram V DD R3 2.5 V to 5.5 V 100 kΩ GND C5 10 µ F + S1 B1 A1 SHUTDOWN SHUTDOWN V O– C1 B2 R5 BYPASS GND 100 kΩ C3 OUT– C2 A3 C1 0.22 µ F IN+ V DD C4 GND 0.22 µ F C3 B3 0.22 µ F IN– V O+ IN+ R1 OUT+ C2 R4 20 kΩ 0.22 µ F 100 kΩ IN– R2 20 kΩ 2.4.3 TPA6203A1 Audio Power Amplifier Evaluation Module Parts List Table 2–3.TPA6203A1 EVM Parts List Manufacturer/ Digi-Key
Краткое содержание страницы № 20
TPA6203A1 EVM PCB Layers 2.4.4 TPA6203A1 EVM PCB Layers The following illustrations depict the TPA6203A1 EVM PCB layers and silks- creen. These drawings are not to scale. Gerber plots can be obtained from any TI sales office. Figure 2–5. TPA6203A1 EVM Top Layer 2-8
