Краткое содержание страницы № 1
NS-24T01FS
24-Port 10/100Mbps
Fast Ethernet
Smart Switch
User’s Guide
Краткое содержание страницы № 2
Краткое содержание страницы № 3
FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communicat
Краткое содержание страницы № 4
UL Warning a) Elevated Operating Ambient Temperature- If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer's maximum rated ambient temperature (Tmra). b) Reduced Air Flow- Installation of the equipment in a rack should be such that the amount of air flow required for safe
Краткое содержание страницы № 5
TABLE OF CONTENTS ABOUT THIS GUIDE............................................................................ 1 PURPOSE................................................................................................ 1 TERMS/USAGE....................................................................................... 1 INTRODUCTION .................................................................................. 3 FAST ETHERNET TECHNOLOGY ................................................
Краткое содержание страницы № 6
CONFIGURATION.............................................................................. 15 CONSOLE PORT (RS-232 DCE)........................................................... 15 CONFIGURING THE SWITCH................................................................. 18 LOGIN .................................................................................................. 19 MAIN MENU ........................................................................................ 20 CONFIGU
Краткое содержание страницы № 7
ABOUT THIS GUIDE Congratulations on your purchase of your Alloy 24-Port 10/100Mbps Fast Ethernet Smart Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package. Purpose This guide discusses how to install your 24-Port 10/100Mbps Fast Ethernet Smart Switch. Terms/Usage In this guide, the term “Switch” (first letter upper case) refers to your 24-Port 10/100Mbps Fast Ethernet Smart Switch, and “switch” (first letter low
Краткое содержание страницы № 8
Краткое содержание страницы № 9
INTRODUCTION This chapter describes the features of the 24-Port 10/100Mbps Fast Ethernet Smart Switch and some background information about Ethernet/Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client/server response times. A
Краткое содержание страницы № 10
Switching Technology Another approach to pushing beyond the limits of Ethernet technology is the development of switching technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or Fast Ethernet LAN segments. Switching is a cost-effective way of increasing the total network capacity available to users on a local area network. A switch increases capacity and decreases network loading by dividing a local area
Краткое содержание страницы № 11
VLAN (Virtual Local Area Network) A VLAN is a group of end-stations that are not constrained by their physical location and can communicate as if in a common broadcast domain, a LAN. The primary utility of using VLAN is to reduce latency and need for routers, using faster switching instead. Other VLAN utility include: Security Security is increased with the reduction of opportunity in eavesdropping on a broadcast network because data will be switched to only those confidential users
Краткое содержание страницы № 12
Features 24×10/100Mbps Auto-negotiation Ethernet ports All ports support auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port Full/half duplex transfer mode for each port Wire speed reception and transmission Store-and-Forward switching scheme capability to support rate adaptation and ensure data integrity Broadcast storm protection Up to 4K unicast addresses entities per device, self- learning, and table aging 256KBytes on-chip packet buffer fo
Краткое содержание страницы № 13
Standard 19” Rack-mount size UNPACKING AND INSTALLATION This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: One 24-Port 10/100Mbps Fast Ethernet Smart Switch One AC power cord, suitable for your area’s electrical power connections Four rubber feet to be used for shock cushioning Screws and two mounting brackets One console cab
Краткое содержание страницы № 14
Installation The site where you install the hub stack may greatly affect its performance. When installing, consider the following pointers: Install the Switch in a fairly cool and dry place. See Technical Specifications for the acceptable temperature and humidity operating ranges. Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust, and direct exposure to sunlight. Leave at least 10cm of space at the front and rear of
Краткое содержание страницы № 15
FX 24-Port 10/100Mbps Ethernet Smart Switch POWER Link A / CT SYSTEM F D X Rack Mounting The switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet with other equipment. Attach the mounting brackets at the switch’s front panel (one on each side), and secure them with the provided screws. Figure 1. Combine the Switch with the provided screws Then, use screws provided with the equipment rack to mount each switch in the rack. 9
Краткое содержание страницы № 16
F X 24-Port 10/100Mbps Ethernet Smart Switch POWER L i nk/ ACT SYSTEM FD X Figure 2. Mount the Switch in the rack Connecting Network Cable The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and it runs both in half and full duplex modes. These ports are Auto-MDI type port. The Switch can auto transform to MDI-II or MDI-X type, so you can just make an easy connection that without worrying if you are using a standard or crossover cable. AC Power The Switch can be used with
Краткое содержание страницы № 17
automatically and may be turned on without having any or all LAN segment cables connected. IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, rear panel, and LED indicators of the Switch. Front Panel The figure below shows the front panels of the Switch. Figure 3. Front panel of 24-port 10/100Mbps Fast Ethernet Switch LED Indicator 11
Краткое содержание страницы № 18
Comprehensive LED indicators display the status of the switch and the network (see the LED Indicators chapter below). 10/100BASE-T Twisted-Pair Ports These ports support network speeds of either 10Mbps or 100Mbps, and can operate in half- and full- duplex transfer modes. These ports also supports automatic MDI/MDIX crossover detection function gives true “plug and play” capability, just need to plug-in the network cable to the hub directly and don’t care if the end node is NIC (Networ
Краткое содержание страницы № 19
UNDERSTANDING LED INDICATORS The front panel LEDs provides instant status feedback, and, helps monitor and troubleshoot when needed. 24-Port 10/100Mbps Ethernet Smart Switch FX 1 2 3 4 5 6 7 8 9 10 11 12131415 16 17 18 19 20 21 22 23 24 Link/ACT POWER FDX SYSTEM Figure 5. LED indicators of the Switch Power and System LEDs POWER: Power Indicator On : When the Power LED lights on, the Switch is receiving power. 13
Краткое содержание страницы № 20
Off : When the Power turns off or the power cord has improper connection. SYSTEM: Management Indicator Blinking : When the CPU is working, the System LED is blinking. On/Off : The CPU is not working. Ports 1~24 Status LEDs Link/ACT: Link/Activity On : When the Link/ACT LED lights on, the respective port is successfully connected to an Ethernet network. Blinking : When the Link/ACT LED is blinking, the port is transmitting or receiving data on the Ethernet network. Off :No l
