Краткое содержание страницы № 1
ZOOM Power Drive PD-01
Operation Manual
INDEX
Features--------------------------------------------------------------------------------------------------------------------------------2
Parts and Functions------------------------------------------------------------------------------------------------------4
Connections----------------------------------------------------------------------------------------------------------------------6
Sound Samples-------------------------------------------------
Краткое содержание страницы № 2
Features The Zoom Power Drive PD-01 is a dedicated overdrive unit with the following features. Unprecedented warm and full overdrive A specially developed analog circuit provides totally unmuffled, natural-sounding distortion without any trace of stickiness or hollowness. This results in natural-sounding distortion which fully brings out picking nuances. Inherent noise is also kept very low. Use as full-fledged booster With the GAIN control set to zero, the PD-01 gives superb clean sound. T
Краткое содержание страницы № 3
HIGH/LOW equalizer provides versatility The PD-01 features separate HIGH and LOW controls. This gives you more flexibility in creating your own sound with options, ranging from a mild drive tone to a sharp, bright distortions. Sturdy metal chassis The rock-solid case made of aluminum not only looks good, it also can withstand the rigors of use on stage. It's low profile provides excellent stability. ZOOM Power Drive PD-01 3
Краткое содержание страницы № 4
Parts and Functions This section explains the various parts of the PD-01. 6 7 3 4 5 1 2 8 10 9 ZOOM Power Drive PD-01 4
Краткое содержание страницы № 5
1 IN jack The input of the unit acts as a power switch. When you connect the plug of the cable from the guitar here, the unit is turned on. OUT jack 2 This is the output of the unit. Connect the plug of the cable going to the guitar amplifier or other effect device here. AC adapter jack 3 When powering the unit from the AC adapter, insert the plug from the adapter into this jack. Be sure to use only an AC adapter rated for 9 V DC, center negative, 300 mA (Zoom AD-0006). When the AC adapter is
Краткое содержание страницы № 6
Connections How to connect the PD-01. Open cover of battery Turn amplifier off and connect cable 1. 2. compartment and insert battery to guitar Make sure that the plug is inserted fully into the OUT jack of the guitar. Plug cable from guitar into IN jack 3. of PD-01 Insert the cable from the guitar into the IN jack of the PD-01. Take care to snap the battery to the This turns the PD-01 on. connector with correct polarity. ZOOM Power Drive PD-01 6
Краткое содержание страницы № 7
Connect cable to OUT jack of PD-01 Raise volume 4. 6. Connect another cable to the OUT jack of the PD-01. Make Turn power to the amplifier on, sure that the plug is inserted and raise the LEVEL control on firmly. the guitar and PD-01. Connect output cable to amplifier 5. Always follow the above sequence. If steps are performed in reverse order, there is a Plug the cable from the OUT jack of the PD- danger of damage to the 01 to the IN jack of the amplifier. amplifier or speakers. ZOOM Power Driv
Краткое содержание страницы № 8
Sound Samples This section shows some actual setting examples and gives information on amplifier settings. Standard overdrive sound Set the amplifier to clean sound without distortion. This will allow you to easily switch between clean sound and overdrive. In this example, the GAIN is set fairly high and the LOW range is given a boost, resulting in a mild, warm sound. This is suitable for applications ranging from light rock backing to solo play. Boost sound emphasizing amp distortion These set
Краткое содержание страницы № 9
Clean sound with a fat character When the clean tone of the amplifier lacks a bit of body, the PD-01 can provide improvement with very moderate settings. The GAIN setting is the key. When set to a point where distortion is barely noticeable, the sound will have more body and punch. Unlike with conventional overdrive effects, you can create a sharp, fat sound. Booster sample 1: clean & crunch This is a special way to use the PD-01. Set GAIN to zero and raise the level to get great booster perform
Краткое содержание страницы № 10
PD-01 and Compact Effects This section shows how to use the PD-01 together with other compact effect devices. With compressor & chorus In this example, a compressor is inserted before the PD-01 for level-equalized overdrive sound. Activating the chorus yields a sound that is optimally matched to light chord work. PD-01 SETTING : GAIN 5 HIGH 5 LOW 5 With chorus & delay In this setup, the PD-01 GAIN control is turned up fully. Connect the chorus and delay after the PD-01, for extended solos. Ch
Краткое содержание страницы № 11
PD-01 and Multi-Effects This section shows how to use the PD-01 together with multi-effect devices such as the GFX-4. Creating drive sound with PD-01 only When using a multi-effect device with the PD-01, the PD-01 should be connected before the other device. For distortion sound, create the distortion with the PD-01 only. Using send/return loop of multi-effect When using a multi-effect device such as the GFX-8 with send/return jacks, the PD-01 can be used as if it were a part of the other devi
Краткое содержание страницы № 12
Troubleshooting If there seems to be a problem with the unit, check the following points first. No sound. Are connections to the IN and OUT jacks reversed? Check the connections. Is a battery inserted? If there is no battery in the unit and the AC adapter is not used, there will be no sound. Insert a fresh battery, or connect the AC adapter. Is the guitar or amplifier volume or the LEVEL control of the PD-01 turned down? Raise the volume. Are there any problems with other effect devices or with
Краткое содержание страницы № 13
Battery gets used up very quickly. Power to the PD-01 gets turned on when a plug is inserted in the IN jack. In this condition, current is drawn from the battery regardless of whether the effect is switched on or off. When not using the unit, be sure to disconnect the plug from the IN jack. Also, the use of alkaline battery rather than manganese is recommended. Connecting the AC adapter (ZOOM AD-0006) allows extended use without having to worry about the battery. When using several effect device
Краткое содержание страницы № 14
Specifications Controls Foot switch GAIN control LEVEL control HIGH control LOW control Input Standard monaural phone jack Rated input impedance: 470 kilohms Rated input level: -20 dBm Output Standard monaural phone jack Rated output impedance: 10 kilohms or more Rated output level: +19 dBm Power requirements Battery (6F22, 9V) or AC adapter AD-0006 (9 V DC, 300 mA, center minus) Battery life Continuous operation: approx. 15hours (alkaline) or 5hours (manganese) External Dimensions 98 (W
Краткое содержание страницы № 15
Usage Precautions Electrical interference The PD-01 has been designed to minimize emission of electromagnetic radiation from inside the device, and to minimize susceptibility to external interference. However, equipment that is very susceptible to interference or that emits powerful electromagnetic radiation should not be placed near the PD-01, as the possibility of interference cannot be ruled out entirely. If such problems occur, move the PD-01 further away from the affected equipment. Clean
Краткое содержание страницы № 16
Safety Precautions In this manual, important information that is intended to prevent the danger of injury to persons and Usage environment damage to equipment is marked with special symbols. The meaning of these symbols is explained below. Avoid using the PD-01 in environments where it will be exposed to: Disregarding instructions printed here incurs the risk of Temperature extremes death or severe injury to persons. High humidity or moisture Excessive dust or sand Disregarding instructions pr
