Краткое содержание страницы № 1
TM
MOXA EtherDevice Switch
EDS-508 Hardware Installation Guide
First Edition, April 2004
Краткое содержание страницы № 2
TM MOXA EtherDevice Switch EDS-508 Hardware Installation Guide The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice Copyright ? 2004 Moxa Networking Co., Ltd. All rights reserved. Reproduction without permission is prohibited. Trademarks MOXA is a registered trademark of the Moxa Group. All other trademarks or registered marks in this manual belong to their respective
Краткое содержание страницы № 3
Table of Contents 1 Chapter 1: Introduction ............................................................1-1 Why EDS-508 is ideal for Industrial Control and Automation ...............1-2 Package Checklist...........................................................................................1-3 Optional Accessories ......................................................................................1-3 Features............................................................................
Краткое содержание страницы № 4
4 Chapter 4: Hardware Overview ............................................... 4-1 Redundant Power Inputs ................................................................................4-2 Relay Contacts .................................................................................................4-2 LED Indicators.................................................................................................4-3 Auto MDI/MDI-X Connection ...............................................
Краткое содержание страницы № 5
1 1 1 Introduction Welcome to MOXA EtherDevice™ Switch EDS-508 , an industrial 8-Port Managed Redundant Ethernet Switches. The following topics are covered in this chapter: ?? Why EDS-508 is ideal for Industrial Control and Automation ?? Package Checklist ?? Features ?? Panel Views of EDS-508 ?? Panel Views of EDS-508-MM-SC ?? Panel Views of EDS-508-SS-SC
Краткое содержание страницы № 6
Why EDS-508 is ideal for Industrial Control and Automation ?? Advanced Network Control Function Multicast traffic management— IGMP Snooping function provides the ability to manage multicast traffic. Network segment planning— The VLAN function not only helps to segment your network without being restricted by physical connections, but is also more secure, and protects against unwanted data transmission. Traffic prioritization capability— Quality of Service (QoS) provides a traffic pri
Краткое содержание страницы № 7
Introduction ?? Industrial Grade Reliability Extended operating temperature capability— To ensure that your Ethernet equipment can withstand harsh environmental conditions (-40 to 75°C). Industrial strength safety regulations— To ensure that your Ethernet equipment can withstand critical industrial applications, such as in hazardous locations (UL/cUL Class 1 division 2 and ATEX Class1 Zone 2) and comply with FCC, TÜV, UL, and CE Standards. Package Checklist MOXA EtherDevice Switch
Краткое содержание страницы № 8
?? EDS-SNMP OPC Server: CD with EDS-SNMP OPC Server Software and manual ?? ADP-SCm-STf-M: Multi-mode SC male to ST female duplex adapter, gray color ?? ADP-SCm-STf-S: Single-mode SC male to ST female duplex adapter, blue color ?? WK-46: Wall Mounting Kit Features ?? Advanced Industrial Networking Capability o Redundant Self-Healing Ethernet Ring Capability (recovery time < 300 ms at full load) o IGMP Snooping for filtering multicast traffic from industrial Ethernet Protocols o S
Краткое содержание страницы № 9
Introduction o -40 to 75°C operating temperature range o IP 30, rugged high-strength case o DIN-Rail or panel mo unting ability ?? Useful Utility and Remote Configuration o Configurable by Web browser, Telnet/Serial console, Windows utility o Send ping commands to identify network segment integrity MOXA EtherDevice Switch Hardware Installation Guide 1-5
Краткое содержание страницы № 10
Panel Views of EDS-508 1. Grounding screw 2. Console port 3. Heat dissipation orifices 4. 6-pin terminal block for DI 1, DI 2 and PWR 2 5. 6-pin terminal block for PWR1, Relay 1 and Relay 2 6. 100BaseTX Port 8 7. 100BaseTX Port 7 8. PWR 1, power input 1 LED 9. PWR 1, power input 1 LED 10. FAULT LED 11. MASTER LED 12. COUPLER LED 13. Turbo Ring inside Mark 1. 14. 100BaseFX Port 15. TP port’s 100 Mbps LED 16. TP port’s 10 Mbps LED 17. Model Name 18. Scre
Краткое содержание страницы № 11
Introduction Panel Views of EDS-508-MM-SC 1. Grounding screw 2. Console port 3. Heat dissipation orifices 4. 6-pin terminal block for DI 1, DI 2 and PWR 2 5. 6-pin terminal block for PWR1, Relay 1 and Relay 2 6. 100BaseFX Port 8 7. 100BaseFX Port 7 8. PWR 1, power input 1 LED 9. PWR 1, power input 1 LED 10. FAULT LED 11. MASTER LED 12. COUPLER LED 13. Turbo Ring inside Mark 14. 100BaseFX Port 15. TP port’s 100 Mbps LED 16. TP port’s 10 Mbps LED 17. Model Name 18. Screw h
Краткое содержание страницы № 12
Panel Views of EDS-508-SS-SC 1. Grounding screw 2. Console port 3. Heat dissipation orifices 4. 6-pin terminal block for DI 1, DI 2 and PWR 2 5. 6-pin terminal block for PWR1, Relay 1 and Relay 2 6. 100BaseFX Port 8 7. 100BaseFX Port 7 8. PWR 1, power input 1 LED 9. PWR 1, power input 1 LED 10. FAULT LED 11. MASTER LED 12. COUPLER LED 13. Turbo Ring inside Mark 14. 100BaseFX Port 15. TP port’s 100 Mbps LED 16. TP port’s 10 Mbps LED 17. Model Name 18. Screw hole for wall
Краткое содержание страницы № 13
2 2 TM 2 Installing MOXA EtherDevice Switch TM This chapter includes information about installing MOXA EtherDevice Switch. The following topics are covered: ?? Mounting Dimensions ?? DIN-Rail Mounting ?? Wall Mounting (Optional)
Краткое содержание страницы № 14
Mounting Dimensions 2-2 MOXA EtherDevice Switch Hardware Installation Guide
Краткое содержание страницы № 15
Installing MOXA EtherDevice Switch DIN-Rail Mounting The aluminum DIN-Rail attachment plate should already be fixed to the back panel of EDS-508 when you take it out of the box. If you need to reattach the DIN-Rail attachment plate to EDS-508, make sure the stiff metal spring is situated towards the top, as shown in the figures below. STEP 1: STEP 2: Insert the top of the DIN-Rail The DIN-Rail attachment unit into the slot just below the stiff will snap into place as shown metal sprin
Краткое содержание страницы № 16
Wall Mounting (Optional) For some applications, you will find it convenient to mount MOXA EDS-508 on the wall, as illustrated below. STEP 1: Remove the aluminum DIN -Rail attachment plate from the MOXA EDS-508 rear panel, and then attach the wall mount plates, as shown in the diagram below. 2-4 MOXA EtherDevice Switch Hardware Installation Guide
Краткое содержание страницы № 17
Installing MOXA EtherDevice Switch STEP 2: Mounting MOXA EDS-508 on the wall requires 4 screws. Use the EDS-508, with wall mount plates attached, as a guide to mark the correct locations of the 4 screws. The heads of the screws should be less than 6.0 mm in diameter, and the shafts should be less than 3.5 mm in diameter, as shown in the figure at the right. Before tightening screws into the wall, make sure the NOTE screw head and shank size are suitable by inserting the screw into
Краткое содержание страницы № 18
Краткое содержание страницы № 19
3 3 TM 3 Wiring MOXA EtherDevice Switch This chapter includes technical information about connecting MOXA EDS-508 to an external power source and to an external alarm system, and shows you what types of cables you should use for the Console port, Ethernet ports, and optical fiber ports. The following topics are covered: ?? Wiring Requirements ?? Grounding MOXA EDS-508 ?? Wiring the Relay Contact ?? Wiring the Redundant Power Inputs ?? Wiring the Digital Inputs ?? Communication C
Краткое содержание страницы № 20
Wiring Requirements Warning Do not disconnect modules or wires unless power has been switched off or the area is known to be nonhazardous. The devices may only be connected to the supply voltage shown on the type plate. The devices are designed for operation with a safety extra-low voltage. Thus, they may only be connected to the supply voltage connections and to the signal contact with the safety extra-low voltages (SELV) in compliance with IEC950/ EN60950/ VDE0805. Warning
