Краткое содержание страницы № 1
CHAPTER 2
Preparing for Installation
Warning This unit is intended for installation in restricted access areas. A restricted
access area can be accessed only through the use of a special tool, lock and
key, or other means of security. Statement 1017
Warning Only trained and qualified personnel should be allowed to install, replace, or
service this equipment. Statement 1030
Warning This equipment must be grounded. Never defeat the ground conductor or
operate the equipment in the absence of a suit
Краткое содержание страницы № 2
Chapter 2 Preparing for Installation Electrostatic Discharge If you will be using your switch as a PoE source, the following warning applies: Warning Voltages that present a shock hazard can exist on inline power circuits if interconnections are made by using uninsulated exposed metal contacts, conductors, or terminals. Avoid using such interconnection methods unless the exposed metal parts are in a restricted access location and users and service people who are authorized to access the loc
Краткое содержание страницы № 3
Chapter 2 Preparing for Installation Electrostatic Discharge Sometimes, voltage is discharged to some of the pins of the connector and not others, or to some pins on the connector before others. This is known as a differential discharge event, which can damage the networking equipment being connected. You can take the following measures to prevent ESD cable damage: • Ground the cable before connecting the networking equipment. You can create a grounding cable using an RJ-45 patch cable by d
Краткое содержание страницы № 4
Chapter 2 Preparing for Installation Site Power Requirements and Heat Dissipation • When removing a component, use any available ejector levers or captive installation screws to release the bus connectors from the backplane or midplane. • Handle carriers by available handles or edges only; avoid touching the printed circuit boards or connectors. • Place a removed component board-side-up on an antistatic surface or in a static shielding container. If you plan to return the component to the f
Краткое содержание страницы № 5
Chapter 2 Preparing for Installation Power Connection Guidelines for AC-Powered Systems Power Connection Guidelines for AC-Powered Systems This section provides guidelines for connecting the Catalyst 4500 series switch AC power supplies to the site power source. Basic guidelines include the following: • Make sure each chassis power supply has its own dedicated branch circuit. • Size the circuits according to local and national codes. • If you are using a 200/240 VAC power source in North Am
Краткое содержание страницы № 6
Chapter 2 Preparing for Installation Power Connection Guidelines for AC-Powered Systems • 1400 W—Table 2-1 lists the AC-input power cord options, specifications, and Cisco product numbers, and shows the different styles of 1400 W AC-input power cord wall plugs that are available for North America or various international locations as well as the appliance coupler that is attached to the power supply end of the power cord. • 2800 W—Table 2-1 lists the AC-input power cord options, specificati
Краткое содержание страницы № 7
Chapter 2 Preparing for Installation Power Connection Guidelines for AC-Powered Systems Table 2-1 AC-Input Power Cord Options (continued) Locale Part Number Length Plug Rating Plug Type Italy CAB-7KACI= 8.2 ft (2.5 m) 250 VAC, 16 A 1/3/16 CEI 23-16 United CAB-7KACU= 8.2 ft (2.5 m) 250 VAC, 13 A BS 89/13 Kingdom BS 1363/A Argentina CAB-7KACR= 8.2 ft (2.5 m) 250 VAC, 10 A IRAM 2073 Appliance Coupler 1300 W (PWR-C45-1300ACV=) and 1400 W (PWR-C45-1400AC=) Power Supplies North America CAB-7513AC
Краткое содержание страницы № 8
Chapter 2 Preparing for Installation Power Connection Guidelines for AC-Powered Systems Table 2-1 AC-Input Power Cord Options (continued) Locale Part Number Length Plug Rating Plug Type Italy CAB-7513ACI= 14 ft (4.3 m) 250 VAC, 16 A 1/3/16, CEI 23-16 United CAB-7513ACU= 14 ft (4.3 m) 250 VAC, 13 A BS 89/13 Kingdom BS 1363/A Argentina CAB-7513ACR= 14 ft (4.3 m) 250 VAC, 10 A IRAM 2073 North America CAB-AC-2800W-TWLK= 13.6 ft 250 VAC, 16 A NEMA L6-20 (locking) (4.1 m) 200–240 VAC operation No
Краткое содержание страницы № 9
Chapter 2 Preparing for Installation Power Connection Guidelines for AC-Powered Systems Table 2-1 AC-Input Power Cord Options (continued) Locale Part Number Length Plug Rating Plug Type International CAB-AC-2800W-INT= 13.6 ft 250 VAC, 16 A IEC 309 (4.1 m) Appliance Coupler 2800 W Power Supply (PWR-C45-2800ACV=) North America CAB-AC-2800W-TWLK= 13.6 ft 250 VAC, 16 A NEMA L6-20 (locking) (4.1 m) 200–240 VAC operation North America CAB-AC-2800W-6-20 13.2 ft 250 VAC, 16 A NEMA 6-20 (non-locki
Краткое содержание страницы № 10
Chapter 2 Preparing for Installation Power Connection Guidelines for AC-Powered Systems Table 2-1 AC-Input Power Cord Options (continued) Locale Part Number Length Plug Rating Plug Type Appliance Coupler 4200 W Power Supply (PWR-C45-4200ACV=) North America CAB-US515P-C19-US 9.8 ft 125VAC, 15A NEMA 5-15P (2.98 m) 120 VAC operation North America CAB-L620P-C19-US 14 ft (4.2 m) 250 VAC, 20 A NEMA L6-20 (locking) 200–240 VAC operation North America CAB-US620P-C19-US 13.2 ft 250 VAC, 20 A NEMA
Краткое содержание страницы № 11
Chapter 2 Preparing for Installation Power Connection Guidelines for AC-Powered Systems Table 2-1 AC-Input Power Cord Options (continued) Locale Part Number Length Plug Rating Plug Type Australia CAB-A3112-C19-AUS 14 ft (4.3 m) 250 VAC, 15 A AS/NZZS 3112 Italy CAB-C2316-C19-IT 14 ft (4.3 m) 250 VAC, 16 A CEI 23-16 United CAB-BS1363-C19-UK 14 ft (4.3 m) 250 VAC, 15 A BS 1363 Kingdom Israeli CAB-S132-C19-ISRL 14 ft (4.3 m) 250 VAC, 16 A SI32 UPS 220V CAB-C19-CBN 9 ft (2.74 m) 250 VAC, 20 A IE
Краткое содержание страницы № 12
Chapter 2 Preparing for Installation Power Connection Guidelines for DC-Powered Systems Power Connection Guidelines for DC-Powered Systems This section provides the basic guidelines for connecting the Catalyst 4500 series switch DC-input power supplies to the site power source or AC power shelf: • All power connection wiring should conform to local and national codes. • DC (–) and DC return (+) terminals are evaluated for use with 1/0 AWG wire (1400W DC supply only). • The ground terminal i
Краткое содержание страницы № 13
Chapter 2 Preparing for Installation Power Connection Guidelines for DC-Powered Systems Calculating DC Input Current Complete power usage tables are in the Catalyst 4500 Series Module Installation Guide. To calculate the DC input current needed for data and inline power applications, use the following steps (the example shows the DC input current requirement in a Catalyst 4503 with a Supervisor Engine II and two WS-X4306-GB modules, and assumes a DC input voltage of -48 VDC): Step 1 Add the
Краткое содержание страницы № 14
Chapter 2 Preparing for Installation Ventilation Step 6 Add the DC input current used by data and the DC input current used by inline devices to find the total DC input current. • Total DC input current = 6.14 + 1.4 = 7.54 A. Ventilation Planning a proper location for the switch and the layout of your equipment rack or wiring closet is essential for successful system operation. You should install the switch in an enclosed, secure area, ensuring that only qualified personnel have access to t
Краткое содержание страницы № 15
Chapter 2 Preparing for Installation Ventilation Appendix A, “Specifications,” lists the operating and nonoperating environmental site requirements for the switches. To maintain normal operation and ensure high system availability, maintain an ambient temperature and clean power at your site. The environmental ranges listed in Appendix A, “Specifications,” are those within which the switch will continue to operate; however, a measurement that approaches the minimum or maximum of a range ind
Краткое содержание страницы № 16
Chapter 2 Preparing for Installation Site-Planning Checklist 1 - IEEE class 3 device 17.3 W total output power 284 W Total heat dissipated by system = (284/.75) * 3.415 = 1293 BTUs/hr Note Although a class 3 device needs 15.4 W to power up, 17.3 W need to be generated from the backplane in order to have 15.4 W at the switch port. 17.3 W comes from the WS-X4248-RJ45V DC-DC converter’s efficiency (89%). Site-Planning Checklist Table 2-2 lists the site-planning activities that you should compl
Краткое содержание страницы № 17
Chapter 2 Preparing for Installation Site-Planning Checklist Table 2-2 Site-Planning Checklist (continued) Task No. Planning Activity Verified by Time Date 3 Power evaluation: • Input power type • Receptacle proximity to the equipment • Dedicated (separate) circuits for redundant power supplies • UPS for power failures 4 Grounding evaluation: • Circuit breaker size 5 Cable and interface equipment evaluation: • Cable type • Connector type • Cable distance limitations • Interface equipment (t
Краткое содержание страницы № 18
Chapter 2 Preparing for Installation Site-Planning Checklist Catalyst 4500 Series Switches Installation Guide 78-14409-08 2-18
