Краткое содержание страницы № 1
Dell™ PowerConnect™ 6224/6224F/6224P/6248/6248P
PowerConnect
6224/6224F/6224P/6248/6248P
Release Notes
Date: May 2010
System Firmware Version 3.2.0.6
Information in this document is subject to change without notice.
© 2003 – 2010 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo and PowerConnect are trade
Краткое содержание страницы № 2
Table of Contents Introduction 1 Global Support 1 Firmware Specifications 1 Hardware Supported 2 Added Functionality in this Release 3 Changed Functionality in this Release 11 Deprecated Commands and Parameters 15 Issues Resolved 17 CLI Reference Manual Updates 21 User’s Guide Updates 24 Known Issues 25 Known Restrictions and Limitations 28 Layer 2 28 Layer 3 29 Management 31 End of Release Notes 32 ii System Firmware Version 3.2.0.6
Краткое содержание страницы № 3
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes Introduction This document provides specific information for the Dell PowerConnect 6200 Series switches, firmware version 3.2.0.6. It is recommended that this release note be thoroughly reviewed prior to installing or upgrading of this product. Global Support For information regarding the latest available firmware, release note revisions, or additional assistance, please visit the Support Web Site http://support.dell.com/. Firmware
Краткое содержание страницы № 4
Firmware Image Name Version No. Release Date PC6200v3.2.0.6.stk 3.2.0.6 May 2010 Version Numbering Convention Version number Description 3 2 0 6 6200 Series Four part version number Denotes the build number. Denotes an ad hoc release of the product software. Denotes a scheduled maintenance release of the product software. Denotes a major version number. Supported Firmware Functionality For more details regarding the functionalities listed, please re
Краткое содержание страницы № 5
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes Added Functionality in this Release Non-Stop Forwarding This feature creates an option to allow the forwarding plane of stack units to continue to forward packets while the control and management planes restart as a result of a power failure, hardware failure, or software fault on the stack management unit. This type of operation is called non-stop forwarding. When the management unit fails, only the management switch needs to be
Краткое содержание страницы № 6
Serviceability Tracing Commands Debug commands provided to enable tracing of various protocols. Faster Initialization for Stacking Failover Fast Reinitialization involves improvement in: • Detection of Management Unit Failure • Building Card Manager Database • Application of saved configuration Performance Improvements (based on Configuration File size) are: • Default ~ 35% • Medium ~ 50% • Large ~80% The impact is higher on large configuration files versus the smaller
Краткое содержание страницы № 7
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes MLD Snooping (RFC2710) In IPv4, Layer 2 switches can use IGMP Snooping to limit the flooding of multicast traffic by dynamically configuring Layer 2 interfaces so that multicast traffic is forwarded to only those interfaces associated with IP multicast address. In IPv6, MLD snooping performs a similar function. With MLD snooping, IPv6 multicast data is selectively forwarded to a list of ports intended to receive the data (instea
Краткое содержание страницы № 8
RADIUS Enhancements • The maximum number of RADIUS servers supported has increased from three to 32. • RADIUS servers with the same name can be used as Backups (RADIUS Authentication and Accounting servers) • Simultaneous Transactions to Multiple RADIUS Servers • RADIUS Accounting – Allows a client the ability to deliver accounting information about a user to an Accounting server. IPv6 support for QoS (ACL/DiffServ) Extends the existing QoS ACL and DiffServ functionality by pro
Краткое содержание страницы № 9
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes Ping/Traceroute Enhancements New ping options have been added to allow the user to specify the number and size of echo requests and the interval between echo requests. A ping can now be initiated via SNMP using the MIB defined in RFC 2925. New traceroute options have been added to allow the user to specify the initial and maximum time to live (TTL) in probe packets, the maximum number of failures before termination, the number of
Краткое содержание страницы № 10
Granular OSPF v2/v3 Traps Configure which of the OSPF traps the OSPF Router should generate by enabling or disabling the trap condition. If a trap condition is enabled and the condition is detected, the OSPF router will send the trap to all trap receivers. auto-cost reference bandwidth and bandwidth Commands Controls how OSPF calculates the default metric for an interface by using the auto-cost command in router OSPF configuration mode. To assign cost-based only on the interface
Краткое содержание страницы № 11
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes Configured Tunnels MTU To comply with RFC 4213, Basic Transition Mechanisms for IPv6 Hosts and Routers, the IPv6 MTU on configured IPv6 over IPv4 tunnels was changed from 1480 bytes to 1280 bytes. IPv6 6 to 4 Auto Tunnels The 6 to 4 tunnels automatically formed IPv4 6 to 4 tunnels for carrying IPv6 traffic. The automatic tunnel IPv4 destination address is derived from the 6 to 4 IPv6 address of the tunnel next hop. There is su
Краткое содержание страницы № 12
IPv6 Management Enhancements Provides the following: • Dual IPv4/IPv6 operation over the network port • Static assignment of IPv6 addresses and gateways for the service/network ports • Ability to ping an IPv6 link-local address over the service/network port • SNMP traps and queries via the service/network port Updated IPv4 Multicast Routing Support The Multicast package code has been extensively re-engineered and furnished with the following: • PIM-DM advanced to RFC 3973 • PI
Краткое содержание страницы № 13
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes Changed Functionality in this Release Spanning Tree Update – 802.1Q-2005 Spanning Tree now supports IEEE802.1Q-2005. This version of the IEEE Multiple Spanning Tree Protocol corrects problems associated with the previous version, provides for faster transition-to-forwarding, and incorporates new features for a port (restricted role and restricted TCN). Restricted role - Setting the restricted role parameter for a port causes the
Краткое содержание страницы № 14
ip route Command Changed The syntax of the ip route command has changed. The metric keyword is no longer accepted as it had no effect. The new syntax is: ip route ip addr subnetmask | prefix-length nextHopRtr [ preference ] distance ospf Command Changed The distance ospf command has been changed (for both OSPFv2 and OSPFv3) to the industry standard syntax. The new syntax is: distance ospf {external | inter-area | intra-area } distance ip mtu Command Changed (Maximum Value In
Краткое содержание страницы № 15
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes Trap Configuration In previous versions of the software, configuration of the flags for controlling traps was scattered about in a number of places. snmp-server enable traps is now a common command for configuring all trap flags. The legacy commands are preserved for backward compatibility. Also note that the keyword “trap” has changed to the plural “traps”. SNTP Server Priority The server priority is now available from the
Краткое содержание страницы № 16
ACL Changes The following changes apply to ingress and egress ACLs: o Maximum of 100 ACLs o Maximum rules per ACL are 127 Note: Although the maximum number of ACLs is 100, and the maximum number of rules per ACL is 127, the system cannot support 100 ACLs that each has 127 rules. Note: Any given port can support up to 127 rules. These 127 rules can be in a single ACL or in multiple ACLs that are applied to the interface. Note: ACL’s can be applied to all Ethernet interfaces. 14
Краткое содержание страницы № 17
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes Deprecated Commands and Parameters The following CLI commands have been deprecated since the 2.x release. Title Description bridge address Interface Configuration mode Rationale: The following parameters have been deprecated: • delete-on-reset • delete-on-timeout • secure ip dhcp filtering Global Configuration mode Rationale: The ip dhcp filtering command has been deprecated. It has been replaced by the ip dhcp snooping com
Краткое содержание страницы № 18
Title Description ip ospf Interface Configuration mode Rationale: The ip ospf command has been deprecated. This functionality has been replaced by the ip ospf area command. ip ospf areaid Interface Configuration mode Rationale: The ip ospf areaid command has been deprecated. This functionality has been replaced by the ip ospf area command. ip dhcp filtering Global Configuration mode Rationale: The ip dhcp filtering command has been deprecated. ip dhcp filtering Interface Configu
Краткое содержание страницы № 19
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes Issues Resolved The following is a list of issues resolved in the current firmware release. Description User Impact Resolution Updated the help string to mention Unable to configure IPv6 host User is not aware that the only IPv4 that IPv4 address is expected as input (4001::2) as an SNMP trap address is accepted by the command for snmp-server host receiver on the DUT. snmp-server host and so CLI command.
Краткое содержание страницы № 20
Description User Impact Resolution Bridge multicast forbidden Flooding in ingress VLAN. Modified the L3 interaction code of forward-unregistered causes snooping to notify the driver when L3 Multicast to fail. snooping is enabled. When snooping is disabled, the current operational state of snooping is also sent to the driver. Cut-through mode command For normal command and no command Changed the help information help is not clear. the help information is the same. Console logging leve
