Краткое содержание страницы № 1
POS TERMINAL
MODEL
UP-3300
INSTRUCTION MANUAL
Краткое содержание страницы № 2
CAUTION: The drawer unit should be securely fitted to the supporting platform to avoid instability when the drawers are open. CAUTION: The socket-outlet shall be installed near the equipment and shall be easily accessible. VORSICHT: Die Netzsteckdose muß nahe dem Gerät angebracht und leicht zugänglich sein. ATTENTION: La prise de courant murale devra être installée a proximité de l’équipement et devra être facilement accessible. AVISO: El tomacorriente debe estar instalado cerca del equipo y d
Краткое содержание страницы № 3
FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows. The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or colou
Краткое содержание страницы № 4
INTRODUCTION Thank you very much for your purchase of the SHARP POS Terminal Model UP-3300. Please read this Manual carefully before operating your machine in order to gain full understanding of functions and features. Please keep this manual for future reference. It will help you if you encounter any operational problems. IMPORTANT • Install your POS terminal in a location that is not subject to direct radiation, unusual temperature changes, high humidity or exposure to water sources. Installa
Краткое содержание страницы № 5
CONTENTS INTRODUCTION··········································································································································· 1 IMPORTANT ················································································································································· 1 PRECAUTION ·············································································································································· 1 1. Part Names and Funct
Краткое содержание страницы № 6
Link PLU entries ·························································································································· 46 Combo meal entries ···················································································································· 46 With/without entries ····················································································································· 47 PLU level shift (for direct PLUs) ··········································
Краткое содержание страницы № 7
8. Special Printing Function ····················································································································· 97 Copy Receipt Printing··························································································································· 97 Guest Check Copy ······························································································································· 98 Validation Printing Function··························
Краткое содержание страницы № 8
12. How to Use the Programming Keyboard ························································································ 131 Programming Keyboard Layout·········································································································· 131 How to Program Alphanumeric Characters ························································································ 132 Using character keys on the keyboard ····························································
Краткое содержание страницы № 9
Function selection ····················································································································· 188 Printing selection ······················································································································· 190 Report Programming ·························································································································· 193 Zero skip ····························································
Краткое содержание страницы № 10
1 Part Names and Functions This chapter describes the part names and functions of this POS terminal. 1 External View Front view Operator display (touch panel) Top cabinet IR receiver cover Money checking space Brightness control Clerk switch Contrast control Bottom cabinet Rear view Side cover Power switch Insure that the power switch is placed in the OFF position prior to connecting AC power. 7
Краткое содержание страницы № 11
Display This POS terminal is equipped with a color LCD operator display. The operator display is a touch panel. The operations can be performed by touching the screen (that shows keys or items in the receipt window) of the operator display. n Operator display (touch panel) The display can be tilted to the best viewing angle by sliding the rear stand. Be sure to push the button on the rear stand when sliding it. • Screen example (REG mode) Time Mode caption NOTE Once the internal clock unit is s
Краткое содержание страницы № 12
• Display example 1 (REG mode) Clerk name Time Mode caption Clerk code Stock indicator (!): Appears when the stock value become to less than minimum stock. Department shift status indicator (D1-D4) Shows the department shift status currently selected. VAT shift status indicator (V): Appears when the VAT status is shifted. E-Mail indicator (M): Appears when the E-mail data exist. Sentinel mark (X): Numeric entry: Appears in the lower right corner of the screen An entered figure appears when the c
Краткое содержание страницы № 13
Clerk Keys This POS terminal allows the operator to use the following four clerk identification systems: • Real clerk keys (standard 6 clerks/max. 126 clerks) • Clerk code entry (max. 255 clerks) • Clerk entry keys (max. 10 clerks) • WMF clerk keys (max. 127 clerks) The standard POS terminal has been shipped with the real clerk key system being programmed. If you want to change the clerk identification system, contact your authorized SHARP dealer. Real clerk keys (1, 2, 3, 4, 5, and 6) These
Краткое содержание страницы № 14
2 Before Operating the POS Terminal This chapter describes those steps required prior to using the POS terminal for the first time. Display Adjustment You can adjust the brightness and contrast of the display by using the corresponding controls. • Brightness control Turning the control backwards darkens the display and turning it forwards brightens the display. • Contrast control Turning the control backwards darkens the display and turning it forwards lightens the display. The backlight in the
Краткое содержание страницы № 15
3 Selecting an Operating Mode The POS terminal will display the following listing by touching the MODE key. Mode selection window Operating Modes You can select any mode other than REG from the list in the mode selection window. Your POS terminal supports the following 9 operating modes: This mode allows you to enter various sales information. The mode selection window REG mode does not list this mode. To select this mode from the mode selection window, touch CANCEL the key. This mode allows cl
Краткое содержание страницы № 16
Mode Selection Procedure Selecting a mode Use one of the following three methods: 1. Touch the desired option line in the window. 2. Move the cursor to a desired option by using the or ENTER key. Then touch the key. 3. Enter the desired option number by using a numeric key. ENTER Then touch the key. NOTE CANCEL When you want to enter the REG mode, simply touch the key. Returning to the mode selection window Procedure To return to the mode selection window, use the following procedure: MODE
Краткое содержание страницы № 17
4 Receipts Type of Receipts You can select one of the following 7 types of receipts. These types of receipts are available in the REG, MGR or VOID mode. By default, the addition receipt type is selected. If you want to change the type of receipts, contact your authorized SHARP dealer. • Addition receipt type • Addition without payment receipt type • Single/double receipt type • Single/double + addition receipt type • Addition + single receipt type • Double addition receipt type • Double (addi
Краткое содержание страницы № 18
n Single/double receipt type When you select this type: • One receipt is issued and the transaction is finalized each time you enter an item. • A single receipt or a double receipt is issued depending on the PGM2 programming for the department. • Each sales transaction is automatically handled as a cash deal. • Items specified as SICS or SIF are treated as a single type. • PBLU entry is allowed. (However, the receipt type is regarded as the single/double + addition mode receipt type.) • Only the
Краткое содержание страницы № 19
n Addition + single receipt type When you select this type: • An addition receipt and each single receipt are issued in series after you finalize the transaction. • Footer logo message is printed at the end of the addition receipt part. • PBAL receipts and a total part of receipt are not issued in a PBLU entry. • The information on multiplication entry will be printed on a single receipt. • Only the top logo is printed on each single receipt. Addition receipt Perforation Single receipt Single re
Краткое содержание страницы № 20
Sorted Receipt Function When the sorted receipt function is programmed for your POS terminal, PLUs are printed in sorted form by PLU group regardless of the order that you entered items. If you want to use this function, contact your authorized SHARP dealer. NOTE This function is ineffective when the single/double receipt type is selected. Example It is assumed that you enter the items in the following order: Key Operation 000001 Group 0 Group 1 2 PLU Group 2 000003 Group 1 000004 CASH/TL The pr
