Руководство по эксплуатации Kicker KM620.2

Краткое содержание страницы № 1

2006 KM Component b01.qxp 2/8/2006 5:35 PM Page 1
KM
KMCOMPONENTSYSTEM
KM620.2, KM625.2
©2006 Stillwater Designs

Краткое содержание страницы № 2

INSTALLATION 2006 KM Component b01.qxp 2/8/2006 5:35 PM Page 2 KMComponentSystem WooferMounting Owner’sManual Figure 2 Make sure the stainless steel mounting screws and U-type Models: KM625.2,KM620.2 speed clips will not puncture the fuel cell, wiring, or interfere with Authorized Kicker Dealer: _________________________ any mechanical parts on the Possible Congratulations on your locations for underside of the mounting KICKER purchase! KM surface. Component Purchase Date: __________________

Краткое содержание страницы № 3

PERFORMANCE 2006 KM Component b01.qxp 2/8/2006 5:35 PM Page 3 TweeterMounting Figure 5 The tweeter can be mounted one of three ways: flush, surface and angled mounting. For flush mounting applications, please refer to the illustration in Figure 5. Choose a flat location on the panel with space behind the panel to allow room for the mounting nut. After checking the clearances, cut the appropriate mounting hole diameter in the panel (see the chart below). Place the shorter mounting nut behind

Краткое содержание страницы № 4

GARANTIE 2006 KM Component b01.qxp 2/8/2006 5:35 PM Page 4 AcousticsLimitedWarranty InternationalWarranty Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer policies. it is warranted for ONE (1) YEAR from date