Краткое содержание страницы № 1
中
MICRO COMPONENT SYSTEM
文
UX-G45 —Consists of CA-UXG45 and SP-UXG45
—
CA-UXG45 SP-UXG45
INSTRUCTIONS
LVT1520-005B
[US/UB]
English
Краткое содержание страницы № 2
Warnings, Cautions and Others CAUTION— (standby/on) button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). When installing the product, ensure that the plug is easily accessible. The button in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY lamp lights in red. When the unit is turned on, the STANDBY lamp goes off. The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, f
Краткое содержание страницы № 3
Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/ Top/ Back:No obstructions should be placed in the areas shown by the dimensions below. 3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more. Front Side 15 cm 15 cm 1 cm 1 cm 15 cm 15 cm 15 cm 10 cm CA-UXG45 SP-UXG45 CA-UXG45 SP-UXG45
Краткое содержание страницы № 4
IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. 3. CAUTION: VISIBLE AND / OR INVISIBLE CLASS 1M LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE UNIT. G-3
Краткое содержание страницы № 5
UX-G45[US].BOOK Page 1 Thursday, June 15, 2006 4:16 PM Contents Introduction .................................................... 2 Precautions...................................................................... 2 How to Read This Manual.............................................. 3 Getting Started ............................................... 4 Step 1: Unpack................................................................ 4 Step 2: Prepare the Remote Control ...........................
Краткое содержание страницы № 6
UX-G45[US].BOOK Page 2 Thursday, June 15, 2006 4:16 PM Introduction Thank you for purchasing the JVC Micro Component Internal heat System. • A cooling fan is mounted on the rear panel to prevent heat We hope it will be a valued addition to your home, giving buildup inside the main unit (see page G-2). you years of enjoyment. For safety, observe the following carefully: Be sure to read this instruction manual carefully before • Make sure there is good ventilation around operating your n
Краткое содержание страницы № 7
UX-G45[US].BOOK Page 3 Thursday, June 15, 2006 4:16 PM How to Read This Manual To make this manual as simple and easy-to-understand as possible, we have adapted the following methods: • Button and control operations are explained as listed in the table below. In this manual, the operations using the remote control is mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks. • Some related tips and notes are explain
Краткое содержание страницы № 8
AM EXT AM LOOP GND UX-G45[US].BOOK Page 4 Thursday, June 15, 2006 4:16 PM Getting Started Step 1: Unpack Step 1:Unpack the package and check the accessories. After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM loop antenna (1) • Remote control (1) •Batteries (2) • AC plug adapter (1) (except for Hong Kong) If any item is missing, consult your dealer immediately. Step 2: Prepa
Краткое содержание страницы № 9
AM EXT AM LOOP GND UX-G45[US].BOOK Page 5 Thursday, June 15, 2006 4:16 PM Step 3: Hook Up If you need more detailed information, see page 7. For more detailed information on connecting external equipment, see page 13. Illustrations of the input/output terminals below are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on the rear may vary. Turn the power off to all components before connections. For better FM/AM rec
Краткое содержание страницы № 10
AM LOOP 110V–127V AM EXT 220V–240V GND AC VOLTAGE SELECTOR UX-G45[US].BOOK Page 6 Thursday, June 15, 2006 4:16 PM FM antenna (supplied) Extend it so that you can obtain the best reception. AM loop antenna (supplied) Turn it until the best reception is obtained. Black striped Non-striped 6 English
Краткое содержание страницы № 11
UX-G45[US].BOOK Page 7 Thursday, June 15, 2006 4:16 PM To assemble and connect the AM loop antenna To connect the speaker cords To assemble the AM loop antenna Make sure the both speakers are connected correctly and firmly. 3 Release 1 Hold To connect the AM loop antenna 2 Insert Make sure to connect the wire correctly: The white end to AM EXT, the black end to GND. When connecting the speaker cords, match the polarity of the speaker terminals: The cord with black stripe to (–), the 1 Hol
Краткое содержание страницы № 12
UX-G45[US].BOOK Page 8 Thursday, June 15, 2006 4:16 PM Before Operating the System The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 Play mode indicators 12 345 6 7 • RAND (random): Lights when Random Play mode is activated. • PRGM (program): Lights when Program Play mode is activated. • : Lights when Repeat mode is activated. – 1: Repeats the tra
Краткое содержание страницы № 13
UX-G45[US].BOOK Page 9 Thursday, June 15, 2006 4:16 PM Daily Operations—Playback 1 Turn on the power. The STANDBY lamp on the main unit turns off. • Without pressing STANDBY/ON , the System 1 turns on by pressing one of the source selecting Numeric buttons in the next step. SET/ buttons RESUME 2 Select the source. DISPLAY MP3 MODE Playback automatically starts if the selected source is PRESET UP, ready to start. 4/1, PRESET DOWN • If you press AUX, start playback source on the 7,Á/¢ exter
Краткое содержание страницы № 14
UX-G45[US].BOOK Page 10 Thursday, June 15, 2006 4:16 PM Remote Listening to the Radio ONLY Remote If the received FM station is hard to listen ONLY To select the AM tuner interval spacing Some countries space AM stations 9 kHz spacing, and other FM MODE MONO countries use 10 kHz spacing. STEREO You can change the AM tuner intervals while the System is on stand by. 1 2 sec. MONO: Reception will improve though stereo effect is lost. MONO indicator lights up. STEREO: Normally select this. St
Краткое содержание страницы № 15
UX-G45[US].BOOK Page 11 Thursday, June 15, 2006 4:16 PM Remote ONLY To tune in to a preset station To start: To pause: To stop: 1 Select a band (FM or AM). FM AM To release, press again. To select a track/group* 2 Select a preset number for the station you store. • You can also use the Increases the track/group* 1 2 3 PRESET UP or numbers. PRESET DOWN. 4 5 6 Decreases the track/group* numbers. 8 9 7 * For details about the group selection, see “For MP3 playback” on page 12. 0 10 To locat
Краткое содержание страницы № 16
UX-G45[US].BOOK Page 12 Thursday, June 15, 2006 4:16 PM IMPORTANT Resume Play for Audio CD/MP3/USB • Always set volume to “VOL MIN” when connecting or Memory/DAP disconnecting the other equipment. If you press 7 during playback, the position of the track • • Connect the USB Memory or DAP directly to the front where you stopped playback will be memorized by the unit. By pressing CD 6 or USB MEMORY 6, you can panel of the unit. Connecting via a USB hub may result start playback again from
Краткое содержание страницы № 17
UX-G45[US].BOOK Page 13 Thursday, June 15, 2006 4:16 PM To adjust the sound input level from other Playing Back a Tape equipment To insert a tape You can adjust the sound input level from the connected You can play back type I tapes. equipment, if the incoming signal is too small or too large. Push Insert Close 1 Select AUX for the source. 2 Adjust the input level. 2 sec. SET/RESUME AUX LVL 1 With the tape side facing front AUX LVL 2 To start: To stop: AUX LVL 1: Ordinary input level (fact
Краткое содержание страницы № 18
UX-G45[US].BOOK Page 14 Thursday, June 15, 2006 4:16 PM Remote ONLY Quick Portable Link (QP Link) If you connect other equipment such as a digital audio player to the AUX terminal and play it back, the source automatically changes to AUX. QP LINK QP Link Canceled (No indication) The QP Link indicator is lit while QP Link is activated. When QP Link is activated... • If an audio input is received at AUX when the System is turned on, the source automatically switches to AUX. • If an audio inp
Краткое содержание страницы № 19
UX-G45[US].BOOK Page 15 Thursday, June 15, 2006 4:16 PM Daily Operations—Sound & Other Adjustments Adjusting the Volume Remote control You can adjust the volume level from level 0 (VOL-MIN) to level 31 (VOL-MAX). Remote control: Main unit: VOLUME SET/RESUME CANCEL VOLUME CLOCK/ DISPLAY TIMER Remote ONLY PRESET UP, To drop the volume in a moment PRESET DOWN FADE To restore the volume, press again, or MUTING adjust the volume level. DIMMER A.STANDBY FADE MUTING Adjusting the Sound SLEEP VOLU
Краткое содержание страницы № 20
UX-G45[US].BOOK Page 16 Thursday, June 15, 2006 4:16 PM 3 Adjust the minute. Changing the Display Brightness—DIMMER PRESET UP Remote SET/RESUME ONLY You can dim the display window. PRESET DOWN DIMMER DIM ON “CLOCK OK” appears and the built-in clock starts DIM OFF (Canceled) working. To check the current time during play Remote ONLY Setting the Clock DISPLAY Clock Without setting the built-in clock, you cannot use the Daily Source information Timer and Recording Timer (see page 23). • To exi
