Краткое содержание страницы № 1
AV SURROUND RECEIVER
RÉCEPTEUR AUDIO-VIDÉO
AVR-1705/685
OPERATING INSTRUCTIONS
MODE D’EMPLOI
FOR ENGLISH READERS PAGE 2 ~ PAGE 65, 128 ~ 132 POUR LES LECTEURS FRANCAIS PAGE 2, 66 ~ PAGE 132
2 We greatly appreciate your purchase of this unit. 2 Nous vous remercions pour l’achat de cet appareil.
2 To be sure you take maximum advantage of all the 2 Pour être sûr de profiter au maximum de toutes les
features this unit has to offer, read these instructions caractéristiques qu’offre cet appareil,
Краткое содержание страницы № 2
ENGLISH FRANCAIS 2 SAFETY PRECAUTIONS FCC INFORMATION (For US customers) 1. PRODUCT This product complies with Part 15 of the FCC Rules. Operation is subject CAUTION to the following two conditions: (1) this product may not cause harmful RISK OF ELECTRIC SHOCK interference, and (2) this product must accept any interference received, DO NOT OPEN including interference that may cause undesired operation. 2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
Краткое содержание страницы № 3
SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions 13. Power-Cord Protection – Power-supply cords should be routed should be read before the product is operated. so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to 2. Retain Instructions – The safety and operating instructions cords at plugs, convenience receptacles, and the point where should be retained for future reference. they exit from
Краткое содержание страницы № 4
ENGLISH 2 INTRODUCTION Thank you for choosing the DENON A/V Surround receiver. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding. TABLE OF CONTENTS z
Краткое содержание страницы № 5
ENGLISH 2 CAUTIONS ON INSTALLATION 0.3 ft (10 cm) or more Noise or disturbance of the picture may be generated if this unit or any other electronic equipment using microprocessors is used near a tuner or TV. If this happens, take the following steps: • Install this unit as far as possible from the tuner or TV. • Set the antenna wires from the tuner or TV away from this unit’s power cord and input/output connection cords. • Noise or disturbance tends to occur particularly when using indoor 0.3 ft
Краткое содержание страницы № 6
ENGLISH 4 FEATURES 1. Dolby Digital 7. Video Conversion Function Using advanced digital processing algorithms, Dolby Digital The AVR-1705/685 is equipped with a function for up-converting provides up to 5.1 channels of wide-range, high fidelity surround video signals. sound. Dolby Digital is the default digital audio delivery system for Because of this, the AVR-1705/685’s MONITOR OUT jack can be DVD and North American DTV. connected to the monitor (TV) with a set of cables offering a higher qual
Краткое содержание страницы № 7
ENGLISH 5 PART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). #2 #1 #0@9 @8 @7 @6@5@4@3 @2 @1 @0 r u o !1 !3 qwei ty !5 !6!7 !8 !9 !0 !2 !4 Power ON/STANDBY switch.......................................(19, 34, 53) SURROUND PARAMETER button.....................................(41, 49) q !7 POWER indicator...............................................................(19, 34) SELECT knob.................................
Краткое содержание страницы № 8
ENGLISH Remote control unit • For details on the functions of these parts, refer to the pages given in parentheses ( ). Remote control signal LED (indicator) .............................(30, 33) transmitter .........................................(17) POWER buttons..............(19, 30~32, 34) SURROUND buttons...................................(36, 39, 49) Input source selector buttons ..................................(30~33, 35) Tuner system/ System buttons ...............(29, 31, 32, 54
Краткое содержание страницы № 9
ENGLISH 6 READ THIS FIRST This AV Surround Receiver must be setup before use. Following these steps. Step 1 (page 9 to 16) Choose the best location to setup the Speakers and connecting the components. Step 2 (page 17) Next, insert the batteries into the remote control unit. Step 3 (page 18 to 28) Finally, setting up the system. 7 SETTING UP THE SPEAKER SYSTEMS 2 Speaker system layout Basic system layout • The following is an example of the basic layout for a system consisting of seven speaker sy
Краткое содержание страницы № 10
R R L ENGLISH 8 CONNECTIONS • Do not plug in the power cord until all connections have been • Note that binding pin plug cords together with power cords or completed. placing them near a power transformer will result in generating • Be sure to connect the left and right channels properly (left with hum or other noise. left, right with right). • Noise or humming may be generated if a connected audio • Insert the plugs securely. Incomplete connections will result in equipment is used independently
Краткое содержание страницы № 11
ENGLISH Connecting the video equipments To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can result in a drop in sound quality. TV or DBS tuner Connecting a TV/DBS tuner MONITOR OUT AUDIO DIGITAL B • Connect the TV’s video input jack (VIDEO VIDEO TV/DBS OUT OUT R L OUT OPTICAL INPUT) to the VIDEO MONITOR OUT jack • Connect the TV’s or DBS tuner’s video output jack using a 75 Ω/ohms video coaxial pin plug (VIDEO OUTPUT) to the VIDEO (yellow)
Краткое содержание страницы № 12
ENGLISH Connecting a Video game equipment Video game • Connect the Video game equipment’s output jacks to this OUTPUT unit’s V. AUX INPUT jacks. R L VIDEO OUT R L L R Connecting a Video camera equipment Video camera • Connect the video camera equipment’s output jacks to this OUTPUT unit’s V. AUX INPUT jacks. R L VIDEO OUT R L The V. AUX terminal is covered with a cap. Remove this LINE OUT cap in order to use the terminal. (See page 4 for instructions VIDEO OUT on removing the cap.) Connecting a
Краткое содержание страницы № 13
ENGLISH R R B B Connecting the Video Component Equipped with Color Difference (Component - Y, P /C , P /C ) Video Jacks • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jacks are not outputs to the VIDEO output jack (yellow) or the S-Video output jack. • Some video sources with component video outputs are labeled Y, CB, CR or Y, Pb, Pr or Y, R-Y, B-Y. These terms all refer to component vide
Краткое содержание страницы № 14
ENGLISH Connecting the antenna terminals DIRECTION OF BROADCASTING STATION FM INDOOR ANTENNA FM ANTENNA (An Accessory) 75 Ω/ohms COAXIAL CABLE AM OUTDOOR ANTENNA GROUND AM LOOP ANTENNA (An Accessory) AM loop antenna assembly Connection of AM antennas 1. Push the lever. 2. Insert the 3. Return the lever. Connect to the AM conductor. antenna terminals. 1 2 3 Remove the vinyl tie Bend in the reverse and take out the direction. connection line. 4 Note to CATV system installer: a. With the anten
Краткое содержание страницы № 15
ENGLISH Speaker system connections • Connect the speaker terminals with the speakers making sure that Speaker Impedance like polarities are matched (< with <, > with >). Mismatching of • When speaker systems A and B are use separately, speakers with polarities will result in weak central sound, unclear orientation of an impedance of 6 to 16 Ω/ohms can be connected for use as front the various instruments, and the sense of direction of the stereo speakers. being impaired. • Be careful when using
Краткое содержание страницы № 16
ENGLISH Protector circuit • This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high output over a long period which results in an extreme temperature rise. When the protection circuit is activated, the speaker outp
Краткое содержание страницы № 17
ENGLISH 9 USING THE REMOTE CONTROL UNIT Following the procedure outlined below, insert the batteries before using the remote control unit. Range of operation of the remote control unit Point the remote control unit at the remote control sensor as shown on the diagram at the left. NOTES: • The remote control unit can be used from a straight distance of approximately 23 feet/7 meters, but this distance will shorten or operation will become difficult if there are obstacles between the remote contro
Краткое содержание страницы № 18
ENGLISH 10 SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 10 to 16), make the various settings described below on the display. These settings are required to set up the listening room’s AV system centered around the this unit. Set the slide switch to “AUDIO”. 1 Use the following buttons to set up the system: 2 SYSTEM SETUP button Press this to display the system setup on the display. CURSOR buttons (•, ª, 0, 1) P
Краткое содержание страницы № 19
ENGLISH Before setting up the system Refer to “CONNECTIONS” (pages 10 to 16) and check that all connections are correct. 1 Press the Power switch (button) . 2 • ¢ ON The power turns on and indicator is light. Set the power switch to this position to turn the power on and off from the included remote control unit. • £ OFF (Main unit) The power turns off and indicator is off. In this position, the power cannot be turned on and off from the remote control unit. Turn on the power. 3 Press the Power
Краткое содержание страницы № 20
ENGLISH Use the (left) and (right) buttons to select your surround speaker type. 3 (Initial) LARGE SMALL NONE 3 SURR. SMALL (left) button (right) button Press the ENTER or (down) button to switch to the surround back speaker setting. NOTE: • When “Small” has been selected for the front speakers, “Large” cannot be selected for the surround speakers. Use the (left) and (right) buttons to select your surround back speaker type. 4 (Initial) LARGE SMALL NONE 4 S.BACK SMALL (left) button (right)
