Краткое содержание страницы № 1
Краткое содержание страницы № 2
Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO CAUTION This symbol is intended to alert the user to the presence of NOT REMOVE COVER (OR BACK). NO USER- important operating and maintenance (servicing) SERVICEABLE PARTS INSIDE. REFER SERVICING
Краткое содержание страницы № 3
CONTENTS Introduction • READ THIS BEFORE OPERATING YOUR UNIT ................................................................................................................ 2 System Connections ........................................................................................................................................................ 4 Front Panel Controls .................................................................................................................................
Краткое содержание страницы № 4
System Connections • Please be certain that this unit is unplugged from the AC outlet before making any connections. • Be sure to observe the color coding when connecting audio, video and speaker cords. • Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver. 15 4 8 236 7 1. CONNECTING ANTENNAS • Change the position of the FM indoor antenna until you • A 75Ω outdoor FM antenna may be used to further get the best reception of your favorite FM s
Краткое содержание страницы № 5
2. CONNECTING AUDIO COMPONENTS • The AUX jacks may also be connected to an additional component. • The DVD jacks may be connected to AUDIO OUT jacks of video components such as DVD player, TV, etc. • The TAPE IN/OUT jacks can be connected to audio recording equipment such as a tape deck, an MD recorder, etc. Note : Do not connect the turntable with MC type cartridge directly. If so, use a separate head amplifier or step-up transformer. Tape deck, MD recorder, etc. CD CD player 3. CONNECTING LIN
Краткое содержание страницы № 6
4. CONNECTING SPEAKERS • You can connect up to four pairs of speakers to this receiver and select the various combinations of speakers according to Speaker A Speaker C your tastes. (Main room) (Main room/ROOM2) • The speakers C and D can be installed in the main room as Right Left Right Left the speakers A and B can or in the another room (ROOM2) for ROOM2 playback. (For details, refer to "ROOM2 PLAYBACK" on page 24.) • Be sure to connect speakers firmly and correctly according to the channel
Краткое содержание страницы № 7
6. CONNECTING MULTI-ROOM SYSTEM KIT • The multi-room system kit(sold separately ) is essential for operation from a remote location . For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com. • IR IN jack allows you to control this receiver from another room with the remote control unit. • To control this receiver from another room with the remote control unit, connect the IR IN jack to the output of the connecting block. • If this recei
Краткое содержание страницы № 8
Front Panel Controls 3112 216 2 4 2 11 9 10 5 67 8 17 12 13 14 15 18 19 20 1. POWER switch 13. TREBLE UP/DOWN ( / ) buttons 2. POWER ON/STANDBY button/indicator 14. BALANCE UP/DOWN ( / ) buttons 3. INPUT SELECTOR knob 15. TONE DIRECT button 4. BAND button 16. TONE DIRECT indicator 5. MASTER VOLUME knob 17. DISPLAY button 6. HEADPHONE jack 18. ROOM 2 button 7. MUTE button/indicator 19. AUX 1, 2 IN jacks 8. SPEAKER A/B, C/D SELECTOR buttons For details, see next page. 9. TUNING UP/DOWN( / )
Краткое содержание страницы № 9
AUX 1, 2 IN JACKS • The AUX 1, 2 IN jacks can be connected to additional audio components such as an MP3 player, etc. Note : • When connecting these jacks to an MP3 player, etc., you should use the stereo mini cord, not a mono mini cord. Bluetooth IN CONNECTOR • If the Bluetooth IN connector is connected to Sherwood Audio Receiver BT- R7(sold separately) with Bluetooth wireless technology, you can enjoy music wirelessly with a music player featuring Bluetooth wireless technology such as MP3
Краткое содержание страницы № 10
Universal Remote Controls This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as CD players, tape decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc. • To operate 7 components other than this receiver , you should enter the setup code for each component. (For details, refer to “USING FUNCTIONS OF REMOTE CONTROL” on page 13.) • The numbered buttons on the remote control have different functions in dif
Краткое содержание страницы № 11
FUNCTION TABLE of the NUMBERED BUTTONS. Notes : • Some functions for each component may not be available or may work differently. • Depending on other kinds of components that are available for each DEVICE button, some functions may not be available or may work differently, too. • For details about functions, refer to the operating instructions of each component. 11 ENGLISH
Краткое содержание страницы № 12
OPERATING COMPONENTS WITH REMOTE CONTROL REMOTE CONTROL OPERATION RANGE • Use the remote control within a range of about 7 meters 1. Enter the setup code for each component other than (23 feet) and angles of up to 30 degrees aiming at the this receiver. For details, refer to “Entering a setup remote sensor. code” on page 13. 2. Turn on the component you want to operate. 3. Press the DEVICE button on the remote control corresponding to the component you wish to operate. 4. Aim the remote contr
Краткое содержание страницы № 13
USING FUNCTIONS OF REMOTE CONTROL • This remote control can control up to 8 different components. • Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered. • For system remote control operation, "000" was stored previously in the memory of the device button "CD" for Sherwood CD player, "DVD" for Sherwood DVD player, "AUX" for Sherwood tape deck and "TV" for Sherwood TV respectively as its factory se
Краткое содержание страницы № 14
Using a punch-through function This remote control may be programmed to operate either the AUDIO volume punch-through or the TV volume and/or TV channel punch-through in conjunction with any of the eight components controlled by this remote control. For example, since this receiver will likely be used as the sound system while watching TV, you may want to adjust this receiver’s volume although this remote control is set to control the TV. • When programming this remote control for the AUDIO volu
Краткое содержание страницы № 15
Programming a macro function • The macro function enables you to program a series of button operations(up to 10) on this remote control into a single button. • You can store up to three separate macro command sequences into “M1”, “M2” and “M3” buttons. 1. Press and hold down both "ENTER/MEMORY" button 2. Press the operation buttons you want to program in and one of three NUMERIC buttons ("1"~"3") order. corresponding to "M1"~"M3" buttons for more than 1 second. Note: You should press the corres
Краткое содержание страницы № 16
Operations LISTENING TO A PROGRAM SOURCE Before operation • Push the POWER switch. • This unit enters the standby mode and the POWER ON/STANDBY button lights up amber. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness. • To switch the power off, push the POWER switch again. Then the power is cut off and the POWER ON/STANDBY button goes off. 1. In the standby mode, turn the power on. • Each time the POW
Краткое содержание страницы № 17
3. Select the desired input source. 6. To mute the sound. or or • Each time the INPUT SELECTOR knob is rotated, the • “MUTE” flickers. input source is changed as follows: • To resume the previous sound level, press this button again. TUNER PHONO AUX 2 AUX 1 (Frequency display) • When adjusting the volume, the mutting effect is turned off. BT-IN CD TAPE DVD AUX 7. To listen with the headphones. 4. Operate the selected component for playback. 5. Adjust the volume to a comfort
Краткое содержание страницы № 18
Adjusting the tone (bass and treble) 8. Adjust the tone as desired. 9. To listen to a program source without the tone effect. When adjusting the bass or or • “TON DIR” is displayed, “DIRECT” lights up and the sound that bypasses the tone circuitry will be heard. When adjusting the treble • To cancel the tone direct function, press this button again to display “TON CTRL”, and then “DIRECT” goes off. or • Each time the buttons are pressed, the tone (BASS and TRBL) can be adjusted within the ran
Краткое содержание страницы № 19
LISTENING TO RADIO BROADCASTS Auto tuning 1. Select the tuner and then the desired band. 2. Press the TUNING UP( , +)/ DOWN( , -) buttons for more than 0.5 second. or or • The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and "TUNED". • If the station found is not the desired one, simply repeat this operation. • Weak stations are skipped during auto tuning. • Each time this button is pressed, the tuner is automatically selec
Краткое содержание страницы № 20
Manual presetting • You can store up to 30 preferred stations in the memory. 1. Tune in the desired station with auto or manual tuning. 2. Press the (ENTER/)MEMORY button. or • "MEM" is flickering for 5 seconds. 3. Select the desired preset number (1~30) and press the (ENTER/)MEMORY button. or • The station has now been stored in the memory. • A stored frequency is erased from the memory by storing another frequency in its place. • If “MEM” goes off, start again from the above step 2. 4. Repeat
