Краткое содержание страницы № 1
U
NS-P110
NS-P116
(NS-P110/NS-P116: NX-E130 + NX-C130 + SW-P130)
HOME CINEMA 5.1CH SPEAKER PACKAGE
HOME CINEMA 6.1CH SPEAKER PACKAGE
OWNER’S MANUAL I
1-NS-P110-116-U.p65 1 3/11/05, 4:02 PM
Краткое содержание страницы № 2
IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. CAUTION 2 Keep these instructions. RISK OF ELECTRIC SHOCK 3 Heed all warnings. DO NOT OPEN 4 Follow all instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 5 Do not use this apparatus near water. COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO 6 Clean only with dry cloth. QUALIFIED SERVICE PERSONNEL. 7 Do not block any ventilation openings. Install in accordance with th
Краткое содержание страницы № 3
FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS Compliance with FCC regulations does not guarantee that UNIT! interference will not occur in all installations. If this This product, when installed as indicated in the product is found to be the source of interference, which instructions contained in this manual, meets FCC can be determined by turning the unit “OFF” and “ON”, requirements. Modifications not expressly approved please try to eliminate the problem b
Краткое содержание страницы № 4
UNPACKING Please check to make sure all listed items are included. Front and rear speakers Speaker cables (and rear center speaker for NS-P116) [10m] [4m] NX-E130 X 3 X 4 X 2 X 5 X 3 Subwoofer cable Center speaker NX-C130 Fasteners (for NX-C130) X 2 Subwoofer SW-P130 Nonskid pads (for NX-E130) SUBWOOFER SYSTEM YST SW005 X 2 X 3 Nonskid pads (for SW-P130) IV 1-NS-P110-116-U.p65 4 3/11/05, 4:02 PM
Краткое содержание страницы № 5
English Thank you for selecting this YAMAHA NS-P110/NS-P116 Speaker Package. CAUTION: Read this before operating your unit. To assure the finest performance, please read this manual Do not plug in this unit to a wall outlet until all connections are ● ● carefully. Keep it in a safe place for future reference. completed. Install the speakers in a cool, dry, clean place – away from The voltage to be used must be the same as that specified on ● ● windows, heat sources, sources of excessive vibrati
Краткое содержание страницы № 6
COMPONENTS OF THE PACKAGE The speaker package “NS-P110 and NS-P116” is designed for use in a multi-channel audio system such as a home Active Servo Processing Subwoofer System with a theater system. built-in power amplifier ● This subwoofer system employs Advanced Yamaha NS-P110 includes four NX-E130 speaker systems, one NX- Active Servo Technology which YAMAHA has developed C130 speaker system and one SW-P130 subwoofer for reproducing higher quality super-bass sound. (Refer to system.
Краткое содержание страницы № 7
English SETTING UP THE SPEAKERS Before making connections, place all speakers in their respective positions. The positioning of the speakers is important because it controls the whole sound quality of this system. Place the speakers depending on your listening position by following the instructions below. Speaker configuration Placing speakers Front speakers: On both sides of and at approximately the same height as the TV set. This speaker package employs a 6 speaker configuration: 2 R
Краткое содержание страницы № 8
Placing the subwoofer It is recommended to place the subwoofer on the outside of either the right or the left front speaker. (See fig. Å .) The placement shown in fig. ı is also possible, however, if the Å ı subwoofer system is placed directly facing the wall, the bass effect may die because the sound from it and the sound reflected by the wall may cancel out each other. To prevent this from happening, face the subwoofer system at an angle as shown in fig. Å. Note There may be a case that you
Краткое содержание страницы № 9
English Mounting the front/rear speakers (and rear center speaker for NS-P116) Mount the front/rear speakers (and rear center speaker for NS-P116) on a shelf, rack or directly on the floor, or hang Tapping screw 1 (Available at the them on the wall. hardware store) Diam. 3.5 to 4 mm Holes 70 mm 70 mm 10 mm To mount the speakers on a wall by Min. 20 mm using the holes on the speakers’ back panels 2 1 Fasten screws into a firm wall or wall support as shown in the figure. 2 Hang the speaker by mo
Краткое содержание страницы № 10
Placing the the front/rear speakers (and rear center speaker for NS-P116) When placing the speakers on a flat surface, attach the included nonskid pads to the corners on the bottom of the speakers as shown on the left. This prevents the speakers from sliding around. Nonskid pad * For NS-P116, the nonskid pads include four spare ones. If you want to mount a speaker on a commercially available speaker stand for the front/rear speakers (and rear center speaker for NS-P116) The following optional
Краткое содержание страницы № 11
English CONNECTIONS Caution: Plug in the subwoofer and other audio/video components after all connections are completed. An example of basic connections Front speakers Rear speakers Right Left Right Left Amplifier SPEAKERS FRONT REAR R L R L (SURROUND) A B SUB WOOFER OUTPUT CENTER CENTER REAR CENTER Subwoofer VOLUME 010 AUTO STANDBY INPUT HIGH /MONO LOW OFF INPUT2 /MONO POWER ON OFF To AC outlet Center speaker Rear center speaker (for NS-P116) E-7 2-NS-P110-116-U.p65 7 05.3.11, 4:27 PM FRONT R
Краткое содержание страницы № 12
● Connect the front, center and rear speakers (and rear ● Connect the subwoofer to the line output (pin jack) center speaker for NS-P116) to the speaker output terminal(s) of the amplifier. terminals of your amplifier with the provided speaker * To connect with a YAMAHA DSP amplifier (or AV cables. receiver), connect the SUBWOOFER (or LOW PASS * The provided speaker cables have labels marked etc.) terminal on the rear of the DSP amplifier (or AV FRONT L, FRONT R, CENTER, REAR L, REAR R receiver)
Краткое содержание страницы № 13
English USING THE SUBWOOFER (SW-P130) Controls and their functions SUBWOOFER SYSTEM YST SW005 1 Port Front panel Rear panel VOLUME VOLUME 010 AUTO STANDBY HIGH LOW POWER OFF 6 ON INPUT /MONO 010 2 OFF AUTO STANDBY HIGH 4 LOW OFF POWER 3 INPUT /MONO 5 ON OFF 110V-120V VOLTAGE SELECTOR 220V-240V 220V-240V VOLTAGE SELECTOR 110V-120V 1 Power indicator 4 AUTO STANDBY (HIGH/LOW/OFF) switch Lights up GREEN when the POWER switch (2) is This switch is originally set to the OFF position. By pressed in t
Краткое содержание страницы № 14
Automatic power-switching function If the source being played is stopped and the input signal is * The power might turn on unexpectedly by sensing noise cut off for 7 to 8 minutes, the subwoofer automatically from other appliances. If that occurs, set the AUTO switches to the standby mode. (When the subwoofer STANDBY switch to the OFF position and use the switches to the standby mode by the automatic power- POWER switch to switch the power between ON and switching function, the power indicator
Краткое содержание страницы № 15
English ● Once the volume balance between the subwoofer and 1 Set the VOLUME control to minimum (0). the front speakers is adjusted, you can adjust the 2 Turn on the power of all the other volume of your whole sound system by using the components. amplifier’s volume control. However, if you change the front speakers (NX-E130) 3 Press the POWER switch to the ON position. to others, you must make this adjustment again. ● For adjusting the VOLUME control, refer to * The power indicator on the front
Краткое содержание страницы № 16
ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY (for SW-P130) The theory of Yamaha Active Servo Technology has been By employing negative-impedance drive circuits, the based upon two major factors, the Helmholtz resonator and amplifier is able to generate precise, low-amplitude, low- negative-impedance drive. Active Servo Processing frequency waves with superior damping characteristics. speakers reproduce the bass frequencies through an “air These waves are then radiated from the cabinet opening as woof
Краткое содержание страницы № 17
English TROUBLESHOOTING Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. Problem Cause What to Do No sound. Speaker cables are not connected Connect them securely. securely. Sound level is too low. Speaker cables are not connected Connect them correctly, that is L (left) to correctly. L, R
Краткое содержание страницы № 18
SPECIFICATIONS NX-E130, NX-C130 SW-P130 Type ......... Full range acoustic-suspension speaker system Type ............... Advanced Yamaha Active Servo Technology Magnetic shielding type Magnetic shielding type Driver ........................ 5 cm (2”) full range cone speaker x 2 Driver ....................................... 16 cm (6-1/2”) cone woofer Nominal Input Power ................................................. 30W Amplifier Output U.S.A. and Canada models ..........................
Краткое содержание страницы № 19
© 2005 All rights reserved. YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECT
