Краткое содержание страницы № 1
CMOS COLOR CAMERA INSTRUCTION MANUAL
IK-HR2D
For Customer Use
Enter the Serial # (which is
located on the bottom of the
cabinet) below. Retain this
information for future refer-
ence.
Model # IK-HR2D
Serial #
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial e
Краткое содержание страницы № 2
SAFETY PRECAUTIONS Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situ
Краткое содержание страницы № 3
Note the following instructions when installing. • Do not cover the product with any material. • Do not place the product on any inflammable material such as a carpet or blanket. • Do not place the product in a confined space, as this may cause heat to build up inside the product. Failure to follow the above cautions may result in fire. Do not place the product in direct sunshine and/or high temperature. Temperature build up inside the product may result in fire. Avoid placing in humid, smoky, o
Краткое содержание страницы № 4
Limitation of Usage The product is not designed for any “critical applications.” “Critical applications” means life support systems, exhaust or smoke extraction applications, medical applications, commercial aviation, mass transit applications, military applications, homeland security applications, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage. Accordingly, [Toshiba/TAIS] disclaims
Краткое содержание страницы № 5
(3) WHT BAL (White Balance) .......................................................................................... 20 (3.1) Changing the setting in AWB (Automatic White Balance) mode ........................ 20 (3.2) Changing the setting in ATW (Automatic Tracking White balance) mode ......... 22 (3.3) Changing gain in MANUAL mode ....................................................................... 23 (4) PROCESS .................................................................
Краткое содержание страницы № 6
1. CAUTIONS ON USE AND INSTALLATION Handling the unit. Do not shoot intense light. • • Do not drop, jolt, or vibrate, as this may result in When intense light enters, vertical stripes or damage to the unit. This may cause problems. transverse band may appear on the screen. This Treat the camera cables carefully to prevent is not a malfunction. Ghosts may occur when cable problems, such as breaks in the cable and there is an intense light near the object. In this case, change the shooting an
Краткое содержание страницы № 7
3. NAMES AND FUNCTIONS 1 Prism faceplate 2 DC IN 12V terminal 5 DISP button 7 MENU UP button 9 DATA UP (AWB) button 10 DATA DOWN button 8 MENU DOWN button 6 PAGE button 4 DVI-D terminal 3 USB terminal [ Front ] [ Rear ] 11 12 Rear [ Bottom ] Prism faceplate The protection cap is attached on the lens mount portion. After removing the cap, mount the lens. Be careful not to scratch or touch the optical area. DC IN 12V terminal Accepts a DC power input (12V). USB Terminal USB terminal. It is use
Краткое содержание страницы № 8
4 CONNECTION 4 1 Standard Connection DVI monitor DVI cable (not supplied) Lens (option) DVI terminal (not supplied) USB terminal IK-HR2D DC IN 12V Less than 11 mm [0.433”] DC power supply USB cable (option) (not supplied) Tri-pod adapter (option) PC (not supplied) 4 2 Cautions on Connection When connecting the camera cables, be sure to turn off the CMOS color camera and any other equipment connected to it. For DC power supply connecting to DC IN 12V terminal, use UL listed and/o
Краткое содержание страницы № 9
* Recommended PC: ® O S : Windows XP SP2 - SP3 ® Windows Vista ® Windows 7 ® ® C P U : Intel Pentium compatible (x86 or x64) CPU 1 GHz or more. Memory : 512 MB or more * Please be aware that this camera will depend on the computer, environment, or cables and unless these are compatible, the camera may not operate correctly. ® * Please be aware that the PC will be required to run DirectX as the API (Application Program Interface) to interface with the video from the camera. F
Краткое содержание страницы № 10
5 OPERATION Refer to the item "4. CONNECTION", and connect the equipment correctly. Turn on the connected equipment and the camera. Aim the lens at the object, adjust the lens iris adjustment, focus adjustment, etc. Refer to the item “5.1 White Balance”, make the adjustment. Please see “5.2 Gain”, “5.3 Switching video signal output” and “7. MODE SETTING BY THE ON SCREEN DISPLAY” to carry out necessary operations. Please see “5.4 Displaying video with USB” to carry out an operatio
Краткое содержание страницы № 11
Display Meaning AWB OK Automatic white balance adjustment finished correctly. AWB NG Automatic white balance adjustment cannot be performed because the video level is LEVEL LOW too low. Adjust the video level by increasing the illumination or opening the lens iris. AWB NG Automatic white balance adjustment cannot be performed because the video level is LEVEL HIGH too high. Adjust the video level by decreasing the illumination or closing the lens iris. AWB NG Automatic white balance adjustme
Краткое содержание страницы № 12
5 2 Gain When the image is dark even if the lens iris is open, change the gain (video gain) to get the desired video level. For gain adjustment of the unit, MANUAL (Manual), OFF (0 dB) modes are provided. Select the mode on the GAIN menu. (Refer to the item “7.3 (2) GAIN (Video gain)”.) (1) MANUAL(Manual gain) Gain adjustment is performed on the GAIN menu. The adjustment range is from 0 to 18dB in 1dB steps. (Refer to the item “7.3 (2) (2.1) Changing gain in MANUAL mode”.) (2) OFF Gain
Краткое содержание страницы № 13
5 4 Display video with USB Connect a USB terminal of the camera and a USB terminal of the computer with a USB cable. Turn on the power of both the camera and the computer. Run the viewer software. * Please use a cable supporting mini-USB (B type) for the USB terminal of the camera. * To display video captured by the camera, viewer software supporting USB Video Class is required separately. ® * In case of Windows XP SP2 or SP3, the built-in viewer software can be used. The procedure for us
Краткое содержание страницы № 14
Electronic shutter Gain White balance Process Matrix color correction Option 6 ITEMS CONTROLLED BY THE ON SCREEN DISPLAY 1 Preset value (Factory setting)* Item Available selections File A File B File C File D File E MODE AUTO, MANUAL, SS MANUAL MANUAL AUTO AUTO AUTO AUTO level -100 0 100 0 0 0 0 0 00 10 05 05 10 00 05 05 05 05 05 05 05 05 00 10 AUTO peak : average AUTO response speed 1 10 20 10 10 10 20 20 AUTO area PRESET A, PRESET B, PRESET C, PRESET A PRESET A PRESET A PRESET A PRESET A
Краткое содержание страницы № 15
7 MODE SETTING BY THE ON SCREEN DISPLAY Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents once set are memorized in the scene files (A, B, C, D, E) selected, so if the power turns off, it is unnecessary to set the values again when using the unit next time. When the setting is performed, select the menu of the item to be set. Note: The characters displayed while operating the on screen display menu (OSD) or auto white balance (
Краткое содержание страницы № 16
7 2 Scene File Five scene files (A, B, C, D, E) are available as user memories for this unit. These are chosen depending on shooting conditions. By pressing [DATA UP], [DATA DOWN] buttons while [DISP] button is pressed and the index menu is displayed, the camera operation is changed immediately from the currently selected scene file to the next. By pressing [DATA UP], [DATA DOWN] buttons while the Index menu is displayed, the camera operation is changed immediately from the currently selec
Краткое содержание страницы № 17
1 1 Changing the setting in AUTO mode Move up and down Select the desired by pressing value by pressing MENU UP,DOWN DATA UP,DOWN Shutter mode AUTO, MANUAL, SS Video level adjustment -100 to 100 -- 1 SHUTTER -- Peak and average ratio adjustment 00 10 to 10 00 MODE AUTO LEVEL 0 Automatic shutter response speed adjustment 1 to 20 PEAK AVE 05 05 SPEED 10 Automatic shutter area selection AREA PRESET A PRESET A, PRESET B, PRESET C, PRESET D, PRESET E < MODE = AUTO> (a) C
Краткое содержание страницы № 18
(d) Changing the automatic shutter zone area Move the “ ” to AREA by pressing [MENU UP], [MENU DOWN] buttons. Select the measurement light area by pressing [DATA UP], [DATA DOWN] buttons. DATA UP PRESET A PRESET B PRESET C PRESET D PRESET E DATA DOWN The available picture area is divided into 64 rectangles. The user can choose one of 5 presets. The shaded rectangles represents the area/pattern where the sampling is taken from. PRESET A PRESET B PRESET CPRESET D PRESET E 1 2 Cha
Краткое содержание страницы № 19
(a) Changing the shutter speed Move the “ ” to MANU by pressing [MENU UP], [MENU DOWN] buttons. Select the shutter speed by pressing [DATA UP], [DATA DOWN] buttons. DATA UP OFF 1/100s 1/125s 1/250s 1/500s 1/1000s 1/2000s 1/4000s DATA DOWN Note: The shutter speed can be set in every effective scanning line (1080/720). The figures of shutter speed in the menu screen are approximate. The accurate shutter speed is calculated using the following mathematical
Краткое содержание страницы № 20
2 GAIN (Video gain) GAIN has two modes; MANUAL, OFF. Move the “ ” to MODE, press the [DATA UP], [DATA DOWN], and select one of the two modes : MANUAL, OFF. In the OFF mode, gain is fixed to 0dB. 2 1 Changing gain in MANUAL mode Move up and down Select the desired by pressing value by pressing MENU UP,DOWN DATA UP,DOWN -- 2 GAIN -- Gain mode MANUAL, OFF MODE MANUAL MANUAL 0dB Manual gain setting 0dB to 18dB (1dB step) Move the “” to MANUAL by pressing
