Руководство по эксплуатации Electro-Voice Sx500+

Краткое содержание страницы № 1

S 500+
x
400-Watt Two-Way
Speaker System
TM
• Ring-Mode Decoupling (RMD )
Technology for increased intelligibility
• Durable structural-foam enclosure with
integral handles and stand mount
• DL15Sx 15-inch woofer and DH2T
compression driver for great sound and
reliable performance
• Asymmetric constant-directivity
75° x 60° high-frequency horn
• Asymmetric horn-loaded woofer section
• 400-watt long-term rms power capacity
• Molded-in attachment points for secure
suspension with optional brackets

Краткое содержание страницы № 2

Sx500+ 400-Watt Two-Way Speaker System the woofer grille. by using the other connector. Care must be Power-Handling Capacity taken not to abuse the amplifier by connect- Speaker Protection ing impedances which are too low. The Sx500+ is shipped in full-range mode using an internal crossover. In biamp mode, The Sx500+ like all other vented systems ex- The user may put the system in biamp mode the long-term average power-handling ca- periences rapidly increasing cone excursion by removing the inpu

Краткое содержание страницы № 3

Sx500+ 400-Watt Two-Way Speaker System Sx500+ 400-Watt Two-Way Speaker System capacity of 400-watts long term (1,600- watts must be sure that safe use on a stand is not Mb500 in all but the simplest situations. The peak) per ANSI/EIA RS-426-A 1980. The fol- affected by wind or any other conditions. Mb500 has supplementary holes to allow the lowing guidelines will help relate this to an ap- Sx500+ to be attached to a wall or ceiling The Sx500+ can be mounted on the 100BK propriate power amplifier

Краткое содержание страницы № 4

Sx500+ 400-Watt Two-Way Speaker System (26.5 in.) wide x 448 mm (17.63 in.) deep. malfunction resulting from misuse or abuse Electro-Voice Speakers and Speaker Sys- Net weight shall be 31.3 kg (69 lb). of the product; or (e) malfunction occurring tems are guaranteed against malfunction due at any time after repairs have been made to to defects in materials or workmanship for a The system shall be capable of producing the product by anyone other than Electro- period of five (5) years from the dat

Краткое содержание страницы № 5

Sx500+ 400-Watt Two-Way Speaker System Sx500+ 400-Watt Two-Way Speaker System HORIZONTAL 5 dB per Division VERTICAL Figure 2 — Sx500+ One-Third-Octave Polar Responses (anechoic environment, 4 volts/6.10 meters (20 feet)) 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 330° 330° 330° 330° 330° 30° 30° 30° 30° 30° 30° 30° 30° 330° 330° 330° 330° 330° 30° 30° 30° 30° 30° 330° 330° 330° 330° 330° 30° 30° 300° 300° 300° 300° 300° 60° 60° 60° 60° 60° 60° 60° 60° 60° 60° 300° 300° 300° 300° 300° 60° 60° 6

Краткое содержание страницы № 6

Sx500+ 400-Watt Two-Way Speaker System Figure 3 — Sx500+ Beamwidth vs. Frequency (anechoic environment) Figure 4 — Sx500+ Directivity vs. Frequency (anechoic environment) Figure 5 — Sx500+ Harmonic Distortion Response 10% Rated Power Input (40 watts), (anechoic environment, 3.05 meters (10 feet) on axis) 6 Sx500+ 400-Watt Two-Way Speaker System

Краткое содержание страницы № 7

Sx500+ 400-Watt Two-Way Speaker System Sx500+ 400-Watt Two-Way Speaker System Figure 6 — Sx500+Full-Range Impedance Curve Figure 7 — Sx500+ Dimensions Figure 8 — Sx500+ enclosure with Mb500 wall/ ceiling mounting bracket METRIC (M8 X 1.25) METAL INSERTS 202 mm FOR SUSPENDING ENCLOSURES WITH KITS (EIGHT PLACES) (8.0 in.) 101 mm (4.0 in.) 838 mm (33.0 in.) Figure 9 — Sx500+ enclosure with Mb700 forged eyebolt attachment kit 101 mm 448 mm (4.0 in.) (17.6 in.) 202 mm (8.0 in.) 673 mm (26.5 in.) 7

Краткое содержание страницы № 8

Sx500+ 400-Watt Two-Way Speaker System 1,000 Hz: Input Connections, Specifications ® –44 dB, 0.6% Two parallel Neutrik Speakon 10,000 Hz: NL4MP connectors with the following Typical Axial Frequency Response, –17 dB, 14% pin arrangements, Swept Sine Wave, 4 volts at 3.05 Third Harmonic, Full-Range Mode: meters (10 feet), (anechoic environ- 100 Hz: 1– = IN (–) ment, normalized for 1 watt at 1 –41 dB, 0.9% 1+ = IN (+) meter; see Figure 1): 1,000 Hz: 2– = Not Used 60-16,000 Hz –62 dB, 0.1% 2+ = Not