Краткое содержание страницы № 1
®
HS8080/HS8134
High Security
Enclosure
Installation/
Operation Manual
C1466M-A (5/98)
Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
Краткое содержание страницы № 2
CONTENTS Section Page 1.0 GENERAL ..................................................................................................3 1.1 IMPORTANT SAFEGUARDS AND WARNINGS ............................... 3 1.2 UNPACKING INSTRUCTIONS ..........................................................4 1.3 RECOMMENDED TOOLS ................................................................. 4 2.0 DESCRIPTION ..........................................................................................5 2.1 MODEL
Краткое содержание страницы № 3
1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture. 3. Only use replacement parts recommended by Pelco
Краткое содержание страницы № 4
1.2 UNPACKING INSTRUCTIONS Unpack and inspect all parts carefully. The following items are supplied: 1 Enclosure 1 Installation/Operation Manual (C1466M-A) 1 Parts bag (Parts may be used to attach the camera to the mount.) 1 Hex bolt, 1/4-20 x 1/2" 1 Split washer 1 Flat washer Be sure to save the shipping carton, boxes and inserts. They are the safest material in which to make future shipments. If an item appears to have been damaged in shipment, replace it properly in its box and contact the fa
Краткое содержание страницы № 5
2.0 DESCRIPTION The information within this manual covers the installation of the HS8080/HS8134 low-profile high security enclosures. The HS8080/HS8134 are high security ceiling mount enclosures designed for in- stallations such as prisons, detention cells, etc., requiring maximum protection from vandalism. The HS8080 is constructed from heavy gauge aluminum for moderate damage resistance. The HS8134 is constructed from heavy gauge steel for high damage resistance. There is no exposed mounting
Краткое содержание страницы № 6
3.0 INSTALLATION 3.1 ENCLOSURE INSTALLATION To mount the HS8080/HS8134 enclosure, perform the following steps: 1. Determine the location and direction of the enclosure to be mounted. 2. Unlock the cover by unscrewing the tamper-resistant screw. (Pin-in-hex wrench included to remove tamper-resistant screw.) Open the cover of the enclosure. 3. Remove the camera cradle by loosening the two 7/16-inch adjustment nuts that hold the camera cradle to the enclosure. 4. Remove any appropriate knockout. A
Краткое содержание страницы № 7
Table A. Video Coaxial Cable Wiring Distances Cable Type* Maximum Distance RG59 750 ft (229 m) RG6 1,000 ft (305 m) RG11 1,500 ft (457m ) * Minimum cable requirements: 75 ohms All-copper center conductor All-copper braided shield with 95-percent braid coverage Table B. 24 VAC Wiring Distances The following are the recommended maximum distances for 24 VAC applications and are calculated with a 10-percent voltage drop. (Ten percent is generally the maximum allowable voltage drop for AC-powered de
Краткое содержание страницы № 8
4.0 MAINTENANCE Regularly scheduled maintenance will prolong the operational life and appearance of the enclosure. Clean the outer surface of the enclosure and the inner surface of the viewing window with a nonabrasive cleaning cloth and antistatic cleaner that is safe for use on acrylic plastic. Do not use kerosene or similar substances that may damage the surface. 8 Pelco Manual C1466M-A (5/98)
Краткое содержание страницы № 9
5.0 SPECIFICATIONS GENERAL Environment: Indoor (Usable outdoors under cover; that is, such as parking garages) Operating Range: 32° to 120°F (0° to 49°C) Weight Unit Shipping HS8080: 2.65 lb (1.20 kg) 3 lb (1.35 kg) HS8134: 4.15 lb (1.88 kg) 5 lb (2.27 kg) Dimensions: See Figure 1 Rating: NEMA 1 MECHANICAL Construction HS8080: 0.078-inch (0.20 cm) aluminum ® 0.25-inch (0.63 cm) Lexan viewing window HS8134: 0.134-inch (0.34 cm) steel ® 0.50-inch (1.27 cm) Lexan viewing window Finish: Gray polyes
Краткое содержание страницы № 10
Max. Camera/ Lens Size: 3.5" H x 9.75" L x 3.0" W (8.89 x 24.77 x 7.62 cm)* * Dimensions include BNC connector Length may vary if width and height of camera and lens are different. Camera Mounting: Removable, adjustable camera cradle Lock: Tamper-resistant 8-32 screw (Pin-in-hex wrench included to remove tamper-resistant screw.) Tamper Switch: Plunger-type door switch with “pull-to-cheat” feature. N.O./N.C. contacts clearly marked on body of switch. ELECTRICAL Cable Entry: One cable knockout hol
Краткое содержание страницы № 11
NOTES Pelco Manual C1466M-A (5/98) 11
Краткое содержание страницы № 12
6.0 WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. ® • Three years on Genex Series products (multiplexers, server, and keyboard). ® • Three years on Camclosure and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, M
