Краткое содержание страницы № 1
U B
NS-P220
HOME CINEMA 5.1CH SPEAKER PACKAGE
OWNER’S MANUAL I
Краткое содержание страницы № 2
• Explanation of Graphical Symbols CAUTION The lightning flash with arrowhead RISK OF ELECTRIC SHOCK symbol, within an equilateral triangle, DO NOT OPEN is intended to alert you to the presence of uninsulated “dangerous CAUTION: TO REDUCE THE RISK OF voltage” within the product’s ELECTRIC SHOCK, DO NOT REMOVE enclosure that may be of sufficient COVER (OR BACK). NO USER-SERVICEABLE magnitude to constitute a risk of PARTS INSIDE. REFER SERVICING TO electric shock to persons.
Краткое содержание страницы № 3
FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS Compliance with FCC regulations does not guarantee that UNIT! interference will not occur in all installations. If this This product, when installed as indicated in the product is found to be the source of interference, which instructions contained in this manual, meets FCC can be determined by turning the unit “OFF” and “ON”, requirements. Modifications not expressly approved please try to eliminate the problem b
Краткое содержание страницы № 4
UNPACKING After unpacking, check that the following items are contained. l Audio connection cord l Main and rear speakers l Speaker cords [4m] [15m] l Center speaker X 2 X 3 l Mounting brackets (A) (B) l Subwoofer X 3 X 2 (C) X 5 l Screws (A) X 8 (B) X 2 IV
Краткое содержание страницы № 5
Thank you for selecting this YAMAHA NS-P220 Speaker Package. CAUTION: Read this before operating your unit. c To assure the finest performance, please read this manual c When not planning to use this unit for a long period (ie., carefully. Keep it in a safe place for future reference. vacation, etc.), disconnect the AC power plug from the wall outlet. c Install the speakers in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, c To prevent lightning dama
Краткое содержание страницы № 6
For U.K. customers SPECIAL INSTRUCTIONS FOR U.K. MODEL If the socket outlets in the home are not suitable for the plug IMPORTANT: supplied with this appliance, it should be cut off and an THE WIRES IN MAINS LEAD ARE COLOURED IN appropriate 3 pin plug fitted. For details, refer to the ACCORDANCE WITH THE FOLLOWING CODE: instructions described below. Blue: NEUTRAL Note: The plug severed from the mains lead must be Brown: LIVE destroyed, as a plug with bared flexible cord is hazardous if engaged in
Краткое содержание страницы № 7
SETTING UP THE SPEAKERS Before making connections, place all speakers in their respective positions. The positioning of the speakers is important because it controls the whole sound quality of this system. Place the speakers depending on your listening position by following the instructions below. Speaker configuration Placing speakers This speaker package employs a 6 speaker configuration: 2 Main speakers: On both sides of and at approximately main speakers, 2 rear speakers, a center speaker an
Краткое содержание страницы № 8
m Mounting the main and center speakers Place the main speakers on a rack or on a shelf. Place the center speaker on top of the TV, on a shelf or inside the TV 1 rack so that it is stable. To obtain more stability and usefulness, we recommend that you mount these speakers on the provided mounting brackets (type A). To mount the speakers on the mounting Mounting bracket brackets (type A) (type A) 1 Attach the bracket to the bottom of the speaker by using the provided screw (type A). 2 Turn and/or
Краткое содержание страницы № 9
m Mounting the rear speakers Mount the rear speakers on a shelf, rack or directly on the floor, or hang them on the wall. 1 To mount the rear speakers on a wall by Mounting using the provided mounting brackets bracket (type B) (type B) Note It is recommended that you connect the speaker cords to the speaker’s terminals before attaching the bracket to the speaker. 1 Attach the bracket to the bottom of the speaker by using the provided screw (type B). Screw (type B) 2 Turn and/or slide the speaker
Краткое содержание страницы № 10
CONNECTIONS Caution: Plug in the subwoofer and other audio/video components after all connections are completed. m An example of basic connections Center speaker Rear speakers Right Left Subwoofer POWER ON OFF VOLUME INPUT2 /MONO STANDBY-RED 0I0 ON-GREEN AUTO STANDBY HIGH LOW OFF INPUT2 /MONO INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS CENTER REAR OUTPUT (SURROUND) MAIN CENTER REAR (SURROUND) To AC outlet REAR L SUB WOOFER FRONT R MAIN A A CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING. FRONT
Краткое содержание страницы № 11
c Basically, connect the subwoofer to the line output (pin c Connect the main, center and rear speakers to the jack) terminal(s) of the amplifier. If your amplifier does speaker output terminals of your amplifier with the not have any line output terminal, connect the subwoofer provided speaker cords. to the speaker output terminals of the amplifier. (Refer to * The provided speaker cords have labels marked page 9 for details.) FRONT L, FRONT R, CENTER, REAR L or REAR R. * To connect with a YAM
Краткое содержание страницы № 12
m How to connect speaker cords to the input and output terminals of the speakers For connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of the cords. If the connections are faulty, no sound will be heard from the speakers. Main/center/rear speakers How to Connect: One side of the provided speaker cord has a white broken 1 Press and hold the terminal’s tab, as shown in the line and the other side has no line. figure. Connect the (+) terminals on bot
Краткое содержание страницы № 13
m Connecting the subwoofer to speaker output terminals of the amplifier If your amplifier has only one set of main speaker output terminals Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT terminals of the subwoofer to the main speakers. Left main Right main speaker speaker Subwoofer POWER ON OFF VOLUME Speaker STANDBY-RED ON-GREEN 0I0 STANDBY AUTO HIGH output LOW INPUT1 OFF FROM AMPLIFIER INPUT2 /MONO terminals INPUT1 FROM AM
Краткое содержание страницы № 14
USING THE SUBWOOFER (SW-P201) m Controls and their functions VOLTAGE SELECTOR Rear panel 220V-240V 8 110V-120V POWER VOLTAGE SELECTOR POWER ON 220V-240V ON 110V-120V 1 OFF OFF VOLUME 7 STANDBY-RED 0I0 ON-GREEN VOLUME 2 AUTO STANDBY HIGH STANDBY-RED 0I0 ON-GREEN 3 LOW AUTO STANDBY OFF HIGH LOW OFF INPUT2 /MONO INPUT2 /MONO 4 INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS INPUT1 5 FROM AMPLIFIER OUTPUT TO SPEAKERS 6 1 POWER switch 4 INPUT2 terminals Set this switch to the ON position to turn on the powe
Краткое содержание страницы № 15
Automatic power-switching function If the source being played is stopped and the input signal is * The power might turn on unexpectedly by sensing noise cut off for 7 to 8 minutes, the subwoofer automatically from other appliances. If that occurs, set the AUTO switches to the standby mode. (When the subwoofer STANDBY switch to the OFF position and use the switches to the standby mode, the power indicator lights up POWER switch to switch the power between ON and in red.) OFF manually. When you pl
Краткое содержание страницы № 16
ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY (for SW-P201) The theory of Yamaha Active Servo Technology has been By employing negative-impedance drive circuits, the based upon two major factors, the Helmholtz resonator and amplifier is able to generate precise, low-amplitude, low- negative-impedance drive. Active Servo Processing frequency waves with superior damping characteristics. speakers reproduce the bass frequencies through an “air These waves are then radiated from the cabinet opening as woof
Краткое содержание страницы № 17
TROUBLESHOOTING Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. Problem Cause What to Do No sound. Speaker cords are not connected Connect them securely. securely. Speaker cords are not connected Sound level is too low. Connect them correctly, that is L (left) to correctly. L, R (right) t
Краткое содержание страницы № 18
SPECIFICATIONS NX-220P, NX-C220 SW-P201 Type ............... 2-way acoustic-suspension speaker system Type ............... Advanced Yamaha Active Servo Technology Magnetically shielded type Driver ...................... 16 cm (6-5/16”) cone woofer (JA1678) Driver ............................................. 8 cm (3-1/8”) cone type Magnetically shielded type 1.9 cm (3/4”) balanced dome type Amplifier Output .................................................... 50W/5Ω Nominal Input Power .........
Краткое содержание страницы № 19
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAH
