Руководство по эксплуатации Tannoy TS10

Краткое содержание страницы № 1

Краткое содержание страницы № 2

OPERATIONAL OVERVIEW 1 Introduction 2 Electrical Connection 3 Installation ® Fitting of feet ® Connecting to your system ® Positioning ® Auto Power / Sleep Function ® Overload Protection ® Cleaning 4 Equipment Overview ® TS8 ® TS10 5 Technical Specifications 1 Introduction Owner’s Manual- TS8 & TS10 Subwoofers These high performance subwoofers have been built and tested with care and precision, to provide first class performance and reliable operation. To ensure maximum benefit from ownership an

Краткое содержание страницы № 3

OPERATIONAL OVERVIEW 2 Electrical Requirements IMPORTANT A mains cable is supplied with an IEC moulded socket at one end and a moulded mains plug at the other end. Where the moulded plug is fitted with a mains fuse, always replace with the same 5A rated fuse. If the fitted plug is unsuitable for your type of outlet sockets, it should be cut off and disposed of safely, in case it is inserted into a live socket elsewhere. The wires in the mains cable are coloured in accordance with the following c

Краткое содержание страницы № 4

OPERATIONAL OVERVIEW 2 Electrical Requirements FUSE PROTECTION An additional mains fuse is provided in the IEC power inlet on the back of the loudspeaker, which can only be removed with the power cord unplugged. This must be replaced by a fuse of the same type and rating (see Specifications or refer to rear panel). FOR YOUR OWN PROTECTION } Store complete packaging in case it is needed for re-use. } Never expose the unit to moisture, water and extremes of temperature or humidity. Do not operate

Краткое содержание страницы № 5

OPERATIONAL OVERVIEW 3 Installation FITTING OF FEET Screw the four cones into the inserts on the base of the cabinet. Spikes and lock nuts are provided to provide stability when used on a carpet. For use on a wooden floor, the spikes should be inverted. CONNECTING TO YOUR SYSTEM For 2 channel stereo use, if your preamplifier has a spare set of outputs, connect left and right to the subwoofer L and R phono inputs using screened cable. Alternatively for AV use, take the subwoofer output from your

Краткое содержание страницы № 6

OPERATIONAL OVERVIEW 3 Installation 2 CHANNEL STEREO Operation is basically the same as above, except the LFE switch should be set to OFF, and the XOVER FREQ. control must be set to suit your main speakers. If you know the lower roll-off frequency of your speakers (as given in the manual), set the control to this value as a starting point. If not, set the control to mid position. Using a range of music, adjust the control to give the smoothest integration between the main speakers and the subwoo

Краткое содержание страницы № 7

OPERATIONAL OVERVIEW 4 TS8 Equipment Overview 280 255 255 292 8

Краткое содержание страницы № 8

OPERATIONAL OVERVIEW 4 TS10 Equipment Overview 286 286 288 323 9

Краткое содержание страницы № 9

OPERATIONAL OVERVIEW 5 Technical Specification TS8 TS10 Output Power 200W RMS 300W RMS Low Frequency Response (-6dB) 32Hz 29Hz Limit for usable output 18Hz 16Hz Inputs 2 x line level phono 2 x line level phono 2 x XLR balanced 2 x XLR balanced Outputs 2 x XLR balanced 2 x XLR balanced (direct or 80Hz HIPASS) (direct or 80Hz HIPASS) Input Filter 2nd order low pass, 2nd order low pass, 50Hz – 150Hz, -6dB. 50Hz – 150Hz, -6dB. Auto Mute After approximately 12 mins, After approximately 12 mins, in ab

Краткое содержание страницы № 10

Tannoy Loudspeakers are designed and manufactured in Great Britain by: Tannoy Ltd, Rosehall Industrial Estate, Coatbridge, North Lanarkshire, ML5 4TF, SCOTLAND Telephone: +44 (0)1236 420199 Fax: +44 (0)1236 428230 Tannoy North America Inc, Suite 1. 335 Gage Avenue, Kitchener, Ontario, CANADA, N2M 5E1 Telephone: (519) 745 1158 Fax: (519) 745 2364 Check periodically for the latest manual revision that will always available for download from www.tannoy.com The revision number of this manual is l