Краткое содержание страницы № 1
INSTALLATION GUIDE
F o r u s e i n d i s t r i b u t e d a u d i o o r h o m e t h e at e r s y s t e m s
indoor /outdoor Weather Proo F Louds Pea Kers
OS6.3Si OS5.3Si
Краткое содержание страницы № 2
CONGRATULATIONS! Thank you for choosing a Niles OS Indoor/Outdoor Loudspeaker. With proper installation and operation, you’ll enjoy years of trouble-free use. Niles manufactures the industry’s most complete line of custom installation components and accessories for audio/video systems. To see the complete Niles product assortment, visit us on the Internet at: www.nilesaudio.com TABLE OF CONTENTS Introduction 1 Features and Benefits 2 Parts Guide 4 Installation Considerations 6 Painting the
Краткое содержание страницы № 3
INTROdUCTION Niles once again raises the bar. With our first OS Indoor/Outdoor models, we revealed a radical new understanding of loudspeaker capabilities. Niles original OS Indoor/Outdoor Loudspeakers are constantly praised for their ability to deliver exemplary reliability and outstanding sound quality. These attributes have made Niles OS Indoor/Outdoor Loudspeakers the bestselling loudspeakers in their class. The goal of our new OS Indoor/Outdoor line-up is to raise this bar with refine
Краткое содержание страницы № 4
FEATURES ANd BENEFITS LIMITEd LIFETIME WARRANTY We engineer bulletproof reliability into all OS loudspeakers and back them up with our industry- leading Limited Lifetime Warranty STEREO INpUT “SI” dESIGN Plays both left and right channels to provide broad sound coverage and a stereo effect from a single loudspeaker INTEGRATEd WOOFER/BAFFLE ASSEMBLY Increases the woofer cone-area to cabinet-width ratio for enhanced bass output MICA-FILLEd pOLYpROpYLENE WOOFER CONE Reduces breakup and lowers dist
Краткое содержание страницы № 5
AdVANCEd MATERIAL SCIENCE Elevates appearance and longevity of the cabinet and grille, plus enhances the performance of the woofers, tweeters, and crossovers ARChITECTURALLY-FRIENdLY dESIGN Delivers stellar acoustical performance, yet tucks discreetly away into corners and under eaves LOW-dIFFRACTION GRILLE ANd FRONT BAFFLE Ensures that the sound waves emanating from the woofer and tweeter are not reflected by the surrounding parts of the loudspeaker for precise imaging and acoustical accuracy
Краткое содержание страницы № 6
p ARTS GUIdE c d b d b d a g g f e e Figure 1. OS6.3Si or OS5.3Si parts: a. Bracket b. Nail Hole c. Wire Hole d. Screw Hole e. Bracket Knob f. Grille g. Cabinet 4
Краткое содержание страницы № 7
h h i Figure 2. OS6.3Si or OS5.3Si Parts (continued): h. Binding Posts i. Threaded Insert (1/4"-20 thread size) ni Les audio Cor Poration – 1-800-buy -hi Fi – 305-238-4373 5
Краткое содержание страницы № 8
INSTALLATION CONSIERA d TIONS TOOLS ANd MATERIALS REqUIREd • Electric drill with 1/4- and 1/2-inc h drill bits, and a 1-inc h flat drill bit for drilling through studs) • Thr ee scr ews or bolts suitable for the mounting surface • The proper scr ewdriver for the mounting har dw ar e • Safety cable (optional) • Cable ties • Wir e stripper • Pencil • Level • Rubber glo ves and protective ey ewear WIRING The OS loudspeakers connect to your receiver or amplifier us
Краткое содержание страницы № 9
Figure 3. Wiring directly from a Figure 4. Incorporating a receiver or amplifier volume control RECOMMENdEd AMpLIFIER pOWER For optimum performance, we recommend amplifiers with the following power ratings: • F or the OS 5.3Si loudspeaker , 5 to 100 W per channel • F or the OS 6.3Si loudspeaker , 5 to 125 W per channel Ironically, most speakers are not damaged by large amplifiers but by small amplifiers. If you are playing at high volume, a small amplifier will run out of power ve
Краткое содержание страницы № 10
L p ACING Th E LOUd Sp EAk ER FOR Th E BEST SOUNd qUALITY (continued) Make sure furniture or other objects will not block or reflect sound from the loudspeaker. You should have a direct line of sight with the front of the loudspeaker. 10' 10' Figure 5. Illustration depicts the optimum placement zone for a listening distance of 10 feet. You can control the loudspeaker’s bass output by placement. This is called the boundary effect. You will get more bass response by mounting the OS loudspe
Краткое содержание страницы № 11
Figure 6. Placement for more bass output Figure 7. Placement for less bass output MOUNTING METh Od S The OS loudspeaker should be mounted horizontally. The bracket knobs will keep the loudspeaker angled correctly in any position once they are tightened. You can choose from three mounting methods to attach the OS loudspeaker to the wall, ceiling, or other mounting surface. 1. if the loudspeak er is never going to be e xposed to sudden accidental impacts, wind, w a ves, or earthquak e
Краткое содержание страницы № 12
MOUNTING METhOdS (continued) Top View Nail Mounting Screw Mounting Custom Bracket Mounting Figure 8. The OS loudspeakers can be mounted three ways SAFETY FIRST! Be careful to use hardware that is designed for the surface you are mounting to. The OS 5.3Si loudspeaker (including bracket) weighs 9 pounds. The OS 6.3Si loudspeaker (including bracket) weighs 11 pounds. We recommend using attachment methods capable of supporting ten times the weight of the loudspeaker and bracket. If you are not s
Краткое содержание страницы № 13
AINTING p ThE LOUdSpEAkER The enclosure, the brackets, and the grilles of the OS loudspeaker can all be painted to match the surroundings. Because we want you to preserve the acoustic qualities of the grille, please paint the grille according to the grille painting instructions. Make sure you pick a paint that is appropriate for the mounting location. There are interior and exterior varieties, and even paint for marine uses. If you are not sure what paint to use, consult a paint store profes
Краткое содержание страницы № 14
pREp ARING TO AINT p (continued) Figure 9. Removing the grille using an awl 4. Mask off the thr eaded inserts on the top and bottom with masking tape . 5. Protect the front of the loudspeak er b y inserting the supplied paint mask in place of the g rille . AINTING p TE h CABINET , BRACET k kNOBS, ANd BRACET k 1. apply tw o thin coats of a sandable spr ay primer to the cabinet and knobs. The br ac k et doesn’t r equir e a coat of primer . 2. allo w the primer to dr y complet
Краткое содержание страницы № 15
AINTING p ThE GRILLE The grille is important to the sound of the loudspeaker. Do not fill the holes of the grille with paint. The grille is constructed of aluminum with a perfectly-even powder coat overall. This powder coat is an ideal primer. If you are using a spray paint, use two thin coats without any primer. If you are using a compressor and a spray gun, use the finest, most diffuse setting. Practice on paper if you are not experienced in painting with spray paint. If you are using an a
Краткое содержание страницы № 16
INSTALLATION MOUNTING Th E BRACk ET (IF ATTACh ING Th E LOUd Sp EAk ER TO A WALL, CEILING, BEAM, OR OTh ER SOLId STRUCTURE) 1. Loosen the br ac k et knobs and r emo ve the br ac k et from the loudspeak er . 2. Hold the br ac k et up to the mounting surface horizontally , so that the loudspeak er wir e fits through the lar ge , cir cular wir e hole in the middle of the br ac k et. align the br ac k et so it is squar e with the surroundings (use a level for accur ac y). 3. Mar
Краткое содержание страницы № 17
CONNECTING ThE LOUdSpEAkER 1. For eac h loudspeak er wir e , separ ate the tw o conductors on eac h end so that at least 2 inc hes ar e fr ee . 2. Strip aw ay 1/2 inc h of insulation from eac h conductor on eac h end. 3. if you ha ve any connectors (gold pins or bananas) whic h you pr efer to use , affix them to the stripped wir e ends no w . only gold-plated connectors should be used outside , as they will not tar nish or corrode . 4. if using the br ac k et to attac h
Краткое содержание страницы № 18
ChECkING LOUdSpEAkER phASE Loudspeaker wire has two conductors. On both your receiver (or amplifier) and each set of loudspeaker binding posts, one conductor is attached to the negative (–) terminals, while the other is attached to the positive (+) terminals. usually, the wire is marked for your convenience, but the marking can be done in the following different ways: • Stripe on one wir e • Ribbed ar ea you can feel on one conductor • differ ent colors of metal wir e on eac h conductor •
Краткое содержание страницы № 19
OpERATION LISTENING AT hIGhER VOLUMES Outdoors there are no walls to reflect and contain the sound. It requires more power to achieve a reasonable volume of sound outside than it does indoors. You also frequently find yourself very far from the loudspeaker. It is possible to turn the volume so high that the amplifier runs out of power. This creates “clipping” distortion. Clipping distortion makes treble sound very harsh and unmusical. When you hear harsh sounding treble from any good loudspe
Краткое содержание страницы № 20
SpECIFICATIONS OS6.3Si Loudspeaker OS5.3Si Loudspeaker Driver Complement Driver Complement • 6" summing woofer • 5" summing woofer • T wo independent 1" Ultrasilk dome tweeters • T wo independent 1" Ultrasilk dome tweeters with fluid cooling with fluid cooling Recommended Amplifier Power Recommended Amplifier Power 5 to 125 watts per channel 5 to 100 watts per channel Nominal Impedance Nominal Impedance 8 ohm per channel, wired in stereo or 4 ohm 8 ohm per channel, wired in stereo or 4 o
