Краткое содержание страницы № 11
Specifications Specifications Model AT8 Driver Compliment 8” Carbon/Glass Fiber Woofer with Dispersion Stabilizer, Custom Debris Screen, High BL Magnet Structure with Vented Pole Piece 1” Teteron Tweeter Housed in a Low Diffraction Precision Adjustment Mechanism Design Principle Infinite baffle for large and varying air volumes Recommended Amplifier Power Ten to One Hundred Fifty Watts per Channel Nominal Impedance 6 Ohms Frequency Response 40 Hz to 21,000 Hz, plus or minus 3dB (on axis) Dis
Краткое содержание страницы № 12
Specifications Specifications Model AT5 Model AT6 Driver Compliment Driver Compliment 5-1/4” Carbon/Glass Fiber Woofer with 6-1/2” Carbon/Glass Fiber Woofer with Dispersion Stabilizer, Custom Debris Dispersion Stabilizer, Custom Debris Screen, High BL Magnet Structure with Screen, High BL Magnet Structure with Vented Pole Piece Vented Pole Piece 1” Teteron Tweeter Housed in a Low 1” Teteron Tweeter Housed in a Low Diffraction Precision Adjustment Diffraction Precision Adjustment Mechanism Mec
Краткое содержание страницы № 13
Speaker Placement the front of the speaker. To determine the Speaker Placement best position, measure the “listening” dis- tance between the ideal listening position Placement for Critical Listening (your favorite chair or couch) and the wall If you like to imagine that the band or in which you plan to install the speakers. orchestra is playing in front of you as you Try to place the speakers so that they are listen to music, or you are very conscious of equally distant from your listening spot
Краткое содержание страницы № 14
Speaker Placement The Boundary Effect You can make listener position still less Corners can affect the bass response of critical by using mono rather than stereo. the speaker powerfully! This is called the This can be difficult to achieve with nor- boundary effect. You will emphasize par- mal stereo amplifiers. However, Niles ticular bass frequencies and cancel out manufactures Systems Integration other bass frequencies when you place Amplifiers which enable one room to be speakers close to the
Краткое содержание страницы № 15
Operation R O S N K E N S Removal of Speaker Operation and Grille Listening at Higher Volumes It requires more power to achieve a reason- Removing The Speaker able volume of sound in a large room than If the grille is already installed, remove it by it does in a small room. It is possible (even if using a bent paper clip or the tip of a you are not a teenager) to turn the volume corkscrew and pulling it away from the frame. so high that the amplifier runs out of power. This creates “clipping” d
Краткое содержание страницы № 16
Installation of the Speaker and Grille in New or Existing Construction Adjusting the Tweeter The tweeter is housed in a precision adjust- ment mechanism which enables precise aiming of the directional high frequencies to provide optimum performance. To adjust the tweeter: 1. Carefully grasp the tweeter housing by placing your thumb and forefinger in the indentations provided. 2. Rotate the tweeter housing either clock- wise or counter clockwise as required. The mechanism is indexed at equal int
Краткое содержание страницы № 17
Speaker Placement Film makers try to use the “surround” has a small five or ten watt amplifier for soundtrack to envelope you in the envi- the rear speakers, stay within five to eight ronment on screen. They will place back- feet of the listening location. If you are ground music, rain sounds, traffic noise, using a 25 to 50 watt amplifier you can etc. on the “surround” soundtrack. In a mount the speakers 10 to 15 feet away home with a single pair of speakers it is from the listening location an
Краткое содержание страницы № 18
Installation Fundamentals Side-by-side wiring is unavoidable in par- Installation ticular spots in every house, just move the speaker wire route away as soon as possi- Fundamentals ble. If construction forces a side by side run for more than ten feet, install metal Running the Speaker Wire in New conduit or shielded speaker wire. Low- Construction voltage wires such as doorbells, inter- If you have doubts about whether you are coms, telephone, security, or television capable of installing a Nile
Краткое содержание страницы № 19
Installation of the Speaker and Grille in New or Existing Construction 1. Stand half way between the two speakers. 2. Play some music with the amplifier or radio set to Mono. 3. Listen to the richness of the bass and the loudness of the sound. 4. Turn off the amplifier and reverse the con- nections on one amplifier channel only. 5. Repeat the listening test with the same setting of the volume control. When the sound has a richer bass and is slightly louder the speakers are working together or “i
Краткое содержание страницы № 20
R Installation of the Speaker and Grille in New or Existing Construction O S N K E N S O C D Installing the Speaker 5. Place the speaker baffle If the grille is already in the frame by inserting installed, remove it by the tabs at the base of the using a bent paper clip or speaker baffle into the the tip of a corkscrew and corresponding holes in pulling it away from the the frame and pushing frame (See Figure 13). the speaker forward until Figure 13 the snaps engage (See 1. Separate the speaker
Краткое содержание страницы № 1
INSTALLATION & OPERATION GUIDE
MODEL S
®
B LENDING H IGH F IDELITY
®
AND A R CHITE C TURE
Краткое содержание страницы № 2
Congratulations! Thank you for choosing an Advanced Technology In-Wall Loudspeaker from Niles. With proper installation and operation, you'll enjoy years of trouble-free use. Niles manufactures the industry's most complete line of custom installation com- ponents and accessories for audio/video systems. For a free full line catalog write: Niles, Catalog Request, P.O. Box 160818, Miami, Florida 33116-0818 TABLE OF CONTENTS INTRODUCTION 2 FEATURES AND BENEFITS 2 INSTALLATION CONSIDERATIONS 4 SPEAK
Краткое содержание страницы № 3
Limited Warranty Limited Warranty Niles Audio Corporation ("NILES") warrants its loudspeaker products to the original purchaser to be free of manufacturing defects in material and workmanship for a period of five years from date of purchase. This Warranty is subject to the following additional conditions and limitations. The Warranty is void and inapplicable if NILES deems that the product has been used or handled other than in accordance with the instructions provided by the manufacturer, inc
Краткое содержание страницы № 4
WARRANTY REGISTRATION CARD Model Purchased______________________________ _____ ________________ _________________________________ Serial Number_____________ ____________________ ___________________________________________________ Date Purchased (month/day/year)_______ _____________________ ______________________________________ Dealer Name and Location________________ _____ ___________________________________________________ ___________________________________________ _________ _________________
Краткое содержание страницы № 5
Features and Benefits speakers capable of reproducing both Introduction music and movie soundtracks with incred- ible realism and sonic impact. They are The AT or Advanced Technology group of perfect anywhere that ultimate sound In-Wall Loudspeakers is designed to deliv- quality is required. er truly stunning performance with opti- An AT5/AT6/AT8 Speaker Kit; and the mum installation flexibility. All models in corresponding Bracket Kit (5, 6 or 8) is the AT series are constructed using the re
Краткое содержание страницы № 6
Features and Benefits No-Strip Speaker Terminal assures fast and accurate hole cutting. The Niles patented No-Strip terminal enables bracket slips behind the drywall and the speakers to be connected without strip- screws secure the bracket to the frame, ping the speaker wire. No-Strip terminals sandwiching the drywall between them. eliminate fumbling with wire strippers and The speaker baffle attaches to the frame, input terminals. They are color coded and and the grille mounts over the speaker
Краткое содержание страницы № 7
PLEASE FILL OUT THE WARRANTY REGISTRATION CARD ON THE REVERSE SIDE, DETACH, AND MAIL TO: Niles Audio Corporation Warranty Registration Dept. P.O. Box 160818 Miami, Florida 33116-0818 DETACH HERE
Краткое содержание страницы № 8
23
Краткое содержание страницы № 9
Installation Considerations Figure 1 Model HD8 Shown New Construction Wings Bracket Frame Speaker Baffle IR Knockout Grille Installation Considerations Recommended Amplifier Power Incorporating a Local Volume Control For satisfactory performance, we recom- In a multiroom system there is one indis- mend an amplifier with a power rating of pensible device for true convenience—a ten to one hundred watts for the AT5; and local volume control. It allows you to ten to one hundred twenty-five watts fo
Краткое содержание страницы № 10
Installation Considerations er, so you must connect the wire from the An IR sensor requires that a 2-conductor amplifier to the volume control and then shielded wire (West Penn D291 or equiva- from the volume control to the speaker. lent) be home run from each sensor loca- tion to the main equipment location. This Speaker Wire wire is normally run beside the speaker Use 2-conductor speaker wire when con- wire at the same time. Typically, the sen- necting AT speakers to your receiver or sor is pl
