Краткое содержание страницы № 1
Fujitsu M10/
SPARC M10 Systems
Quick Guide
Manual Code: C120-E677-03EN
October 2013
Краткое содержание страницы № 2
Preface This document describes the basic specifications and system configurations that users need to be familiar with when using Oracle or Fujitsu SPARC M10 Systems. The document also provides an overview of the SPARC M10 Systems and indicates the refer- ence manuals for different work phases or purposes. The SPARC M10 Systems are equipped with the high-performance, high-reliability SPARC64 X processor. The preface includes the following sections: Text Conventions Document Feedback Text C
Краткое содержание страницы № 3
Understanding an Overview of the System This section describes the lineup, firmware and software, external view, system configuration, and system specifications of SPARC M10 Systems. Lineup Server main unit The SPARC M10 Systems lineup consists of the following models that meet various requirements. SPARC M10-1 This compact model combines both the space-saving and high performance of a single rack unit. External Views of the Chassis and System Reference Configuration Examples - SPARC M10-
Краткое содержание страницы № 4
Firmware and Software Required for SPARC M10 Systems In SPARC M10 Systems, different firmware and software, such as XSCF firmware and Oracle VM Server for SPARC, are used to configure physical partitions and logical domains. For details on firmware and software, see "Chapter 1 Understanding an Overview of the SPARC M10 Systems" in the Fujitsu M10/SPARC M10 Systems System Operation and Administration Guide. SPARC M10 Systems Logical domain Logical domain Logical domain Logical domain Logical
Краткое содержание страницы № 5
The main firmware and software used in SPARC M10 Systems are as follows. XSCF Firmware The XSCF firmware is a system control facility mounted on SPARC M10 Systems as standard. The XSCF firmware runs on a dedicated processor (service processor) that is independent of the processors in the server. The XSCF firmware is placed in each chassis of SPARC M10-1, SPARC M10-4, and SPARC M10-4S. The XSCF firmware interacts with a logical domain and controls the entire system. If the system is comprised o
Краткое содержание страницы № 6
External Views of the Chassis and System Configuration Examples The following pages show external views of the chassis and system configuration examples for different models. - 6 -
Краткое содержание страницы № 7
SPARC M10-1 A single SPARC M10-1 is used in this configuration. Up to three PCI expansion units can be connected to it. External views of the SPARC M10-1 chassis Front view Panel LEDs Operation panel Lever Power switch USB port Disk drive Lever Mode switch Rear view PCI Express slots Power supply units XSCF-LAN port XSCF USB port SAS port USB port GbE LAN ports XSCF LED Serial port Locator LED - 7 -
Краткое содержание страницы № 8
SPARC M10-4 A single SPARC M10-4 unit is used, not as a building block, in this configuration. Up to eleven PCI expansion units can be connected to it. External views of the SPARC M10-4 chassis Front view Front cover Fan unit (*) Operation panel USB port Power switch Disk drive Mode switch Panel LEDs Power supply unit (*) *: You can see the fan unit and the power supply unit by removing the front cover. Rear view XSCF-LAN port XSCF USB port Serial port XSCF LED Power supply units USB port PCI Ex
Краткое содержание страницы № 9
(1) SPARC M10-4S Multiple SPARC M10-4S units are connected in a building block configuration. This model can start with a single-BB configuration and then be expanded to a multi- BB configuration with the addition of individual chassis. The model contains a crossbar unit for logically switching the connections of CPU/ memory board units and I/O units. System configuration example - building block configuration Reference (connected through crossbar boxes) Up to eight PCI expansion units can
Краткое содержание страницы № 10
(2) SPARC M10-4S External views of the crossbar box The crossbar box is a switch used to logically connect the CPU and SPARC M10-4S. There are two types of crossbar boxes: one has two mounted crossbar units, and the other has three mounted crossbar units. Front view (common to both types, which have two/three mounted crossbar units) Front cover Fan unit (*) Operation panel Power switch Panel LEDs Mode switch BB-ID switch *: You can see the fan unit by removing the front cover. Rear view Rear
Краткое содержание страницы № 11
(3) SPARC M10-4S System configuration example – building block configuration (directly connected chassis) In this configuration, the SPARC M10-4S units are directly connected with electric cables without using crossbar boxes. Four-BB configuration (1 BB to 4 BBs) Up to four SPARC M10-4S units can be connected. BB#02 BB#00 : Crossbar unit BB#01 BB#03 : Power cable Building block numbers are identifiers (BB-IDs) that are numbered sequentially starting with 00. For the connection procedure, see
Краткое содержание страницы № 12
(4) SPARC M10-4S Sixteen-BB configuration (9 BBs to 16 BBs) Up to sixteen SPARC M10-4S units can be connected through four crossbar boxes containing crossbar units (three units per box). BB#00 BB#08 XBBOX#80 BB#01 BB#09 BB#02 BB#10 XBBOX#81 BB#03 BB#11 BB#04 BB#12 XBBOX#82 BB#05 BB#13 XBB XBBOX: Crossbar bo OX: Crossbar box x BB#06 BB#14 XBBOX#83 : Crossbar unit : Crossbar unit BB#15 BB#07 : : Optical cable Optical cable Each number shown after BB# or XBBOX# is an ID (BB-ID) used for identific
Краткое содержание страницы № 13
PCI expansion unit (Option) The optional PCI expansion unit can be connected to either the SPARC M10-1 chassis or the SPARC M10-4/M10-4S chassis. External views of the PCI expansion unit Front view Front cover Fan unit (*) LED *: You can see the fan unit by removing the front cover. Rear view Link board PCI Express slot Power supply units - 13 -
Краткое содержание страницы № 14
System Specifications This section mainly describes the hardware specifications of Athena servers. For details on firm- ware and software, see "Chapter 1 Understanding an Overview of the SPARC M10 Systems" in the Fujitsu M10/SPARC M10 Systems System Operation and Administration Guide. Model specifications (1/3) Item SPARC M10-1 SPARC M10-4 SPARC M10-4S External Height 1U 4U 4U dimensions Height x width x depth 42.5 mm x 431 mm x 175 mm x 440 mm x 175 mm x 440 mm x (*1) 721 mm 746 mm 810 mm (1.
Краткое содержание страницы № 15
Model specifications (2/3) Item SPARC M10-1 SPARC M10-4 SPARC M10-4S Built-in I/O Built-in disk (SAS) 8 (HDD/SSD) 8 (HDD/SSD) 8 (HDD/SSD) Built-in disk hardware Mounted Mounted Mounted RAID Built-in CD-RW/ Not mounted Not mounted Not mounted DVD-RW drive Built-in tape drive Not mounted Not mounted Not mounted On-board interface 4 GbE LAN ports 4 GbE LAN ports 4 GbE LAN ports 1 SAS port 1 SAS port 1 SAS port 2 USB ports 2 USB ports 2 USB ports PCIe slot 3 slots 11 slots 8 slots I/O slot Maximum n
Краткое содержание страницы № 16
Model specifications (3/3) Item SPARC M10-1 SPARC M10-4 SPARC M10-4S eXtended External interface 2 XSCF-LAN ports 2 XSCF-LAN ports 2 XSCF-LAN ports System 1 serial port 1 serial port 1 serial port Control 1 USB port 1 USB port 1 USB port Facility (*6) 3 XSCF BB control ports 1 XSCF DUAL control port Redundant Not available Not available Supported (2 or more configuration building blocks (*3)) Active replacement Not available Not available Supported (only 2-BB configuration or larger) *1: Non
Краткое содержание страницы № 17
Crossbar box specifications (2/2) Item Crossbar box Redundant configuration Power supply unit/fan unit Active replacement Power supply unit/fan unit/XSCF unit *: None of the dimensions includes the sizes of protrusions. PCI expansion unit specifications Item PCI expansion unit External Height 2U dimensions Height x width x depth 86 mm x 440 mm x 740 mm (*1) (3.4 in. × 17.3 in. × 29.1 in.) Weight 22 kg Number of PCIe slots 11 Redundant configuration Power supply unit/fan unit Active replacement P
Краткое содержание страницы № 18
What Do I Do Now? Reference Guide (by Phase/Purpose) This section describes the work for each phase, from system installation to expansion and main- tenance, and the reference manuals for each work item. indicates a required work item, and indicates a work item to be performed as required. 2. Operation and 3. Expansion and 1. Installation Administration Maintenance 1-a. Understanding overview 3-a. Adding PCI expansion unit 2-a. Daily management (Backup, etc.) 3-b. Adding optional 1-b. In
Краткое содержание страницы № 19
1. Installation a. Understanding an overview of the system Check the SPARC M10 Systems overview. Reference "Understanding an Overview of the System" (This document) b. Installing the system - Connecting a chassis Before installing the system, confirm that the installation location meets the requirements. After confirmation, install and connect the chassis required for the system configuration. Fujitsu M10/SPARC M10 Systems Installation Guide Reference "1.1 Workflow for the SPARC M10-1"
Краткое содержание страницы № 20
2. Operation and Administration a. Conducting daily management You should understand the basic operations, which include logging in/out from the management console and starting/stopping the system. These basic operations are required for system operation and management and for daily management work items, such as backup. Reference Fujitsu M10/SPARC M10 Systems System Operation and Administration Guide "Chapter 2 Logging In/Out of the XSCF" "Chapter 6 Starting/Stopping the System" "Cha
