Краткое содержание страницы № 1
CMOS COLOR CAMERA INSTRUCTION MANUAL
IK-HR1S
For Customer Use
Enter below the Serial #
which is located on the
bottom of the cabinet. Retain
this information for future ref-
erence.
Model # IK-HR1S
Serial #
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial enviro
Краткое содержание страницы № 2
SAFETY PRECAUTIONS Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situ
Краткое содержание страницы № 3
Note the following instructions when installing. � Do not cover the product with any material. � Do not place the product on any inflammable material such as a carpet or blanket. � Do not place the product in a confined space, as this may cause heat to build up inside the product. Failure to follow the above cautions may result in fire. Do not place the product in direct sunshine and/or high temperature. Temperature build up inside the product may result in fire. Avoid placing in humid, smoky, o
Краткое содержание страницы № 4
Limitation of Usage The product is not designed for any “critical applications.” “Critical applications” means life support systems, exhaust or smoke extraction applications, medical applications, commercial aviation, mass transit applications, military applications, homeland security applications, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage. Accordingly, [Toshiba/TAIS] disclaims
Краткое содержание страницы № 5
(6) OPTION....................................................................................................................... 25 (6.1) Changing RS-232C baud rate ............................................................................ 25 (7) Returning to factory settings ....................................................................................... 25 8 BEFORE MAKING SERVICE CALL........................................................ 26 9 SPECIFICATIONS................
Краткое содержание страницы № 6
1. CAUTIONS ON USE AND INSTALLATION Handling the unit. Do not shoot intense light. � � Do not drop, jolt, or vibrate, as this may result in When intense light enters, vertical stripes or transverse bands may appear on the screen. damage to the unit. This may cause problems. Treat the camera cables carefully to prevent This is not a malfunction. Ghosts may occur when there is an intense light near the object. In cable problems, such as breaks in the cable and loose connections. this case,
Краткое содержание страницы № 7
3. NAMES AND FUNCTIONS Optical area 2 1 DC IN 12V terminal 4 DISP button 6 MENU UP button 8 DATA UP (AWB) button 9 DATA DOWN button 3 REMOTE 7 MENU DOWN button terminal 5 PAGE button 10 FORMAT switch 11 HD-SDI terminal [ Front ] [ Rear ] 12 Mounting holes M3 13 Mounting holes M2 [ Bottom ] Optical area The protection cap is attached on the lens mount portion. After removing the cap, mount the lens. Be careful not to scratch or touch the optical area. DC IN 12V terminal Accepts a DC power inpu
Краткое содержание страницы № 8
4 CONNECTION 4 1 Standard Connection HD- capable monitor (option) Lens (option) HD-SDI 75 ohms coaxial HD-SDI (BNC connector) cable (option) input IK-HR1S DC IN 12V Less than 11 mm [0.433”] DC power supply (option) AC adapter (AC-Y415A) 4 2 Cautions on Connection When connecting the camera cables, be sure to turn off the CMOS color camera and any other equipment connected to it. For DC supply connecting to DC IN 12V terminal, when not using AC adapter: AC-Y415A (not supplied), us
Краткое содержание страницы № 9
4 3 Connection on Rear Panel There are DC IN 12V, REMOTE terminals and HD-SDI terminal (BNC connector) for basic connection on the rear panel. Please use them as needed. Rear panel view 4 1 23 1 2 3 4. 3A Connector Pin Assignments DC IN 12V terminal REMOTE terminal TXD 1 +12V 1 2 +12V 2 RXD 3GND 3 GND 4GND * For connecting to the REMOTE terminal, use a shielded cable. Connect the cable correctly or damage may occur to the camera. 9
Краткое содержание страницы № 10
5 OPERATION Refer to the item "4. CONNECTION", and connect the equipment correctly. Turn on the connected equipment and the camera. Aim the lens at the object, adjust the lens iris adjustment, focus adjustment, etc. Refer to the item “5.1 White Balance”, make the adjustment. Refer to the items “5.2 Gain”, “7. MODE SETTING BY THE ON SCREEN DISPLAY”, select the necessary items. 5 1 White Balance For white balance adjustment of this unit, ATW (Automatic Tracking White balance), AWB (Au
Краткое содержание страницы № 11
Display Meaning AWB OK Automatic white balance adjustment finished correctly. AWB NG Automatic white balance adjustment cannot be performed because the video level is LEVEL LOW too low. Adjust the video level by increasing the illumination or opening the lens iris. AWB NG Automatic white balance adjustment cannot be performed because the video level is LEVEL HIGH too high. Adjust the video level by decreasing the illumination or closing the lens iris. AWB NG Automatic white balance adjustme
Краткое содержание страницы № 12
52 Gain When the image is dark even if the lens iris is open, change the gain (video gain) to get the desired video level. For gain adjustment of the unit, MANUAL (Manual), OFF (0 dB) modes are provided. Select the mode on the GAIN menu. (Refer to the item “7.3 (2) GAIN (Video gain)”.) (1) MANUAL(Manual gain) Gain adjustment is performed on the GAIN menu. The adjustment range is from 0 to 18dB in 1dB steps. (Refer to the item “7.3 (2) (2.1) Changing gain in MANUAL mode”.) (2) OFF Gain is
Краткое содержание страницы № 13
Electronic shutter Gain Matrix color correction White balance Process Option 6 ITEMS CONTROLLED BY THE ON SCREEN DISPLAY Preset value Item Available selections (Factory setting) MODE AUTO, MANUAL, SS MANUAL -100 0 100 AUTO level 0 AUTO peak : average 00 10 05 05 10 00 05 05 AUTO response speed 1 10 20 10 AUTO area PRESET A, PRESET B, PRESET C, PRESET A PRESET D, PRESET E *1 MANUAL speed OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, OFF 1/2000s, 1/4000s Syncro. scan 15/1125H 1123/11
Краткое содержание страницы № 14
7 MODE SETTING BY THE ON SCREEN DISPLAY Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents once set are memorized in the scene files (A, B, C, D, E) selected, so if the power turns off, it is unnecessary to set the values again when using the unit next time. When the setting is performed, select the menu of the item to be set. 7 1 Using the Menus When the unit is powered on, the normal screen showing only the video signal appea
Краткое содержание страницы № 15
73 Menus Select the menu to change the setting by referring to the item “7.1 Using the Menus”. When the [MENU UP], [MENU DOWN] buttons are pressed, the “ ” on the screen moves up and down. Move the “ ” to the item whose setting you wish to change. 1 SHUTTER Electronic shutter The electronic shutter has three modes; AUTO, MANUAL, SS(Synchro Scan). Press the “Page” button to enter the Shutter Page. Use the “Data Up/Down” buttons to select the Shutter Mode. DATA UP AUTO MANUAL SS
Краткое содержание страницы № 16
(b) Changing the automatic shutter detection (ratio between peak and average value) Move the “ ” to PEAK/AVE by pressing [MENU UP], [MENU DOWN] buttons. Select the ratio between peak and average value by pressing [DATA UP], [DATA DOWN] buttons. (Peak:Average) The peak value increases by pressing [ ] DATA UP 00:10 05:05 10:00 The peak value decreases by pressing [DATA DOWN] (c) Changing the automatic shutter response speed Move the “ ” to SPEED by pressing [MENU UP], [MENU D
Краткое содержание страницы № 17
1 2 Changing the setting in MANUAL mode Move up and down Select the desired by pressing value by pressing MENU UP,DOWN DATA UP,DOWN Shutter mode AUTO, MANUAL, SS -- 1 SHUTTER -- Shutter speed setting MODE MANUAL OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, MANUAL OFF 1/2000s, 1/4000s Shutter speed (OFF setting) 59.94 Hz setting : 1/60s 50 Hz setting : 1/50s < MODE = MANUAL> (a) Changing the shutter speed Move the “ ” to MANU by pressing [MENU UP]
Краткое содержание страницы № 18
2 GAIN (Video gain) GAIN has two modes; MANUAL, OFF. Move the “ ” to MODE, press the [DATA UP], [DATA DOWN], and select one of the two modes : MANUAL, OFF. In the OFF mode, gain is fixed to 0dB. 2 1 Changing gain in MANUAL mode Move up and down Select the desired by pressing value by pressing MENU UP,DOWN DATA UP,DOWN -- 2 GAIN -- Gain mode MANUAL, OFF MODE MANUAL MANUAL 0dB Manual gain setting 0dB to 18dB (1dB step) Move the “ ” to MANUAL by pressin
Краткое содержание страницы № 19
(a) Changing R PAINT Move the “ ” to R PAINT by pressing [MENU UP], [MENU DOWN] buttons. Select the desired value of red paint by pressing [DATA UP], [DATA DOWN] buttons. [DATA UP] Red is increased. -10 0 10 Red is decreased. [ ] DATA DOWN (b) Changing B PAINT Move the “ ” to B PAINT by pressing [MENU UP], [MENU DOWN] buttons. Select the desired value of blue paint by pressing [DATA UP], [DATA DOWN] buttons. [ ] Blue is increased.
Краткое содержание страницы № 20
3 2 Changing the setting in ATW(Automatic Tracking White balance) mode Move up and down Select the desired by pressing value by pressing MENU UP,DOWN DATA UP,DOWN White balance mode AWB, ATW, MANUAL -- 3 WHT BAL -- R PAINT (Red offset) adjustment -10 to 10 MODE ATW R PAINT 0 B PAINT (Blue offset) adjustment -10 to 10 B PAINT 0 Selecting R PAINT (Red offset) and B PAINT (Blue offset) makes a white screen be reddish and bluish in color. (
