Краткое содержание страницы № 1
H.264 Privacy Button Compact Design
IP8132/8133/8133W
IP8133W
Wireless
IP8132
Wired
IP8133
Wire ed d Po oE
Rev. 1.1
IP Surveillance
Краткое содержание страницы № 2
VIVOTEK Table of Contents Overview3 Read Before Use �������������������������������������������������������������������������������������������������������������������������������������3 Package Contents ������������������������������������������������������
Краткое содержание страницы № 3
VIVOTEK Overview Read Before Use The use of surveillance devices may be prohibited by law in your country� The Network Camera is not only a high-performance web-ready camera but can also be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use� It is important to first verify that all contents received are complete according to the Package Contents listed below� Take not
Краткое содержание страницы № 4
LED Definitions VIVOTEK Physical Description Front Panel IP8132 Status LED Microphone Lens IP8133W Status LED Microphone NOTE: The front view of IP8133 is identical to that of IP8133W except the wireless antenna� Speaker White-light LED PIR Sensor Item LED status Description 1 Steady Red Power on and system boot Red LED off Power off 2 Blink Green every 1 sec� Network connected Steady Red Network failed 3 Blink Green every 2 sec� Audio muted 4 Blink Orange every 2 sec� Privacy button presse
Краткое содержание страницы № 5
VIVOTEK Back Panel IP8132 Ethernet 10/100 RJ45 Socket General I/O Terminal Block Power Cord Socket Recessed Reset Button IP8132 MAC:0002D132C353 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Pat. 6,930,709 Privacy Button IP8133 & 8133W General I/O Ethernet 10/100 T
Краткое содержание страницы № 6
VIVOTEK General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below. Pin Name 4 Power 3 Digital Output + 2 Digital Input - 1 Ground Hardware Reset The reset button is used to reset the system or restore the factory default settings� Sometimes resetting the system can return the camera to normal operation If � the system problems remain after reset, restore the factory s
Краткое содержание страницы № 7
VIVOTEK Wireless Connection: Using the WPS Button 1� Make sure your AP (Access Point) and Operating System support WPS (Wi-Fi Protected Setup) functions� WPS enables easy setup with compatible APs� 2� Disconnect your LAN cable, and wait for the LED to turn red� 3� Press the WPS button for 1 second� You can then hear vocal instructions (in English) from the camera speaker� 4� Press and hold down the WPS button on your AP (some router/AP will have a virtual button on their management softwa
Краткое содержание страницы № 8
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment Setting up the Network Camera over the Internet This section explains how to configure the Network Camera to an Internet connection� 1� If you have external devices such as sensors and alarms, make connections from general I/O terminal block� 2� Connect the camera to a switch via Ethernet cable� Use a Category 5 Cross Cable when Network Camera is directly connected to PC� 3� Connect the power cable from the Network
Краткое содержание страницы № 9
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK IP address : 192.168.0.3 W WA AN (Wide Area Network ) N (Wide Area Network ) Subnet mask : 255.255.255.0 R Ro ou ut te er r I IP P a ad dd dr re es ss s :: f fr ro om m I IS SP P P Default router : 192.168.0.1 Internet L LA AN ( N (Local Area Network) Local Area Network) R Ro ou ut te er r I IP P a ad dd dr re es ss s :: 192.168.0.1 Cable or DSL Modem IP address : 192.168.0.2 Subnet mask : 255.255.255.0 Default router : 192.168.0.1 2� In
Краткое содержание страницы № 10
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN� 1� Install IW2 under the Software Utility directory from the software CD� Double click the IW2 shortcut on your desktop to launch the program� 2� The program will conduct an analysis of your network environment� After your network environment is analyzed, please click Next to continue the program� 3� The program will search for
Краткое содержание страницы № 11
VIVOTEK Ready to Use 1� A browser session with the Network Camera should prompt as shown below� 2� You should be able to see live video from your camera� You may also install the 32-channel recording software from the software CD in a deployment consisting of multiple cameras� For its installation details, please refer to its related documents� User's Manual - 11
Краткое содержание страницы № 12
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using Web Browsers Use Installation Wizard 2 (IW2) to access to the Network Cameras on the LAN� If your network environment is not a LAN, follow these steps to access the Network Camera: ® 1� Launch your web browser (ex� Microsoft Internet Explorer, Mozilla Firefox, or Netscape)� 2. Enter the IP addres
Краткое содержание страницы № 13
VIVOTEK ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera� For more information about how to enable password protection, please refer to Security on page 28� ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable the ActiveX Controls for your browser� 1� Choose Tools > Internet Options > Security > Custom Level� ® 2. Loo
Краткое содержание страницы № 14
VIVOTEK IMPORTANT! • Currently the Network Camera utilizes 32-bit ActiveX plugin. You CAN NOT open a management/view session with the camera using a 64-bit IE browser� • If you encounter this problem, try execute the Iexplore.exe program from C:\ Windows\SysWOW64. A 32-bit version of IE browser will be installed. • On Windows 7, the 32-bit explorer browser can be accessed from here: C:\Program Files (x86)\Internet Explorer\iexplore.exe. 14 - User's Manual
Краткое содержание страницы № 15
VIVOTEK Using RTSP Players To view the MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming� Quick Time Player Real Player VLC media player 1� Launch the RTSP player� mpegable Player mpegable Player 2� Choose File > Open URL� A URL dialog box will pop up� 3. The address format is rtsp://:/
Краткое содержание страницы № 16
VIVOTEK Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet� For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8� To utilize this feature, please check the following settings on your Network Camera: 1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
Краткое содержание страницы № 17
VIVOTEK Using VIVOTEK Recording Software The product software CD also contains recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras� Please install the recording software; then launch the program to add the Network Camera to the Channel list� For detailed information about how to use the recording software, please refer to the user’s manual of the software or download it from http://www.vivotek.com� User's Manual - 17
Краткое содержание страницы № 18
VIVOTEK Main Page This chapter explains the layout of the main page. It is composed of the following sections: VIVOTEK INC� Logo, Host Name, Camera Control Area, Configuration Area, Menu, and Live Video Window� Resize Buttons VIVOTEK INC. Logo Host Name Camera Control Area Hide Button Live View Window Configuration Area VIVOTEK INC. Logo Click this logo to visit the VIVOTEK website� Host Name The host name can be customized to fit your needs. For more information, please refer to System on p
Краткое содержание страницы № 19
VIVOTEK 繁體中文 in: English, Deutsch, Español, Français, Italiano, 日本語 , Português, 簡体中文 , and � Hide Button You can click the hide button to hide the control panel or display the control panel� Resize Buttons : Click the Auto button, the video cell will resize automatically to fit the monitor. Click 100% is to display the original homepage size� Click 50% is to resize the homepage to 50% of its original size� Click 25% is to resize the homepage to 25% of its original size� Live Video Window ■
Краткое содержание страницы № 20
VIVOTEK Pause: Pause the transmission of the streaming media. The button becomes the Resume button after clicking the Pause button� Stop: Stop the transmission of the streaming media. Click the Resume button to continue transmission� Start MP4 Recording Start MP4 Recording: Click this button to record video clips in MP4 file format to your computer. Press the Stop MP4 Recording button to end recording� When you exit the web browser, video recording stops accordingly. To specify the s
