Краткое содержание страницы № 1
NETWORK CAMERA
Model: IK-WP41A
User’s Manual
For information on our latest products and peripheral devices, refer to the following
Website:
http://www.toshibasecurity.com
If the URL changes, refer to the Toshiba website (http://www.toshiba.com).
Краткое содержание страницы № 2
Table of Contents Introduction ......................................................................................................................................... 2 FCC (USA)-INFORMATION .................................................................................................... 2 Important Safeguards ....................................................................................................................... 4 Important Safeguards (Cont.) ..........................
Краткое содержание страницы № 3
Introduction FCC (USA)-INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful int
Краткое содержание страницы № 4
Thank you for purchasing the IK-WP41A Network Camera. Before using the camera, read this User’s Manual carefully to ensure correct usage. After reading this User’s Manual, save it for future reference. The design, specifications, software, and manual contents are subject to change without prior notice. Terms and Trademarks The term "OS" is used in this manual to indicate operating systems compatible with this product. -- Windows XP: Microsoft Windows XP operating system -- Windo
Краткое содержание страницы № 5
Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the product and in the user's manual. 4. Follow Instructions Follow all operating and use instructions. 5. Cleaning Disconnect this camera from the power supply before cleaning. 6. Attachments Do not use attachments not recommended by
Краткое содержание страницы № 6
12. Lightning For additional protection on this camera during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the camera due to lightning and power-line surges. If lightning occurs, do not touch the unit or any connected cables in order to avoid electric shock. 13. Overloading Do not overload the power supply or extension cords as this can resu
Краткое содержание страницы № 7
Important Safeguards (Cont.) CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The excla
Краткое содержание страницы № 8
Notes on Use and Installation Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction. Treat the camera with care Dropping or subjecting the camera to intense vibration may cause it to malfunction. Never touch internal parts Do not touch the internal parts of the camera ot
Краткое содержание страницы № 9
Precautions for Use Disclaimer We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in any of the following cases: 1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or accidental; use under extreme operating conditions. 2. Malfunction or non-function resulting in indirect, additional or consequential damages, including but not limited to loss of expected income and suspension of b
Краткое содержание страницы № 10
Package Contents IK-WP41A ---- 1 Allen wrench ---- 1 Torx wrench ---- 1 Screw (1/4-20UNC, 12mm) ---- 1 RJ45 Coupler ---- 1 Silica-gel ---- 1 CD-ROM ---- 1 Quick Start guide and Important Safeguards ---- 1 Warranty ---- 1 Physical Description Unit:mm 9
Краткое содержание страницы № 11
Hardware Reset Occasionally resetting the system can return the camera to normal operation. If the system problems remain after resetting, restore the factory settings and install again. The IK-WP41A has a reset terminal and default terminal. (See QSG on page 17) Reset: Using a pointed object, short both terminals of “Reset”. Wait for the Network Camera to reboot. Restore: Using a pointed object, short both terminals of “Default” for about 5 seconds to restart the camera. Note that all
Краткое содержание страницы № 12
Installation Hardware Installation Please verify that your product package contains all the accessories listed in the Package Contents listed on page 7. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5e or higher. Hardware Installation is shown in the Quick Start Guide(QSG). Please refer to page 10 of the QSG. Network Deployment In this user’s manual, “User” refers to whoever has access to the Network Ca
Краткое содержание страницы № 13
2. The micro SD/SDHC card is inserted in direction of the following picture.( The contacts face downward.) Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers or RTSP players. Using Web Browsers Use IP Camera Finder to access the Network Cameras on the LAN. See QSG on 19. If your network environment is not a LAN, follow these steps to access the Network Camera: 1. Launch your web browser (Microsoft® Internet Explorer). 2. Ent
Краткое содержание страницы № 14
4. If it is the first time installing the network camera, an information bar will pop up as shown below. Follow the instructions to install the required plug-in on your computer. NOTE: The administrator log-in ID and password are set to "admin" and to "1234" respectively by default. To prevent unauthorized access, it is highly recommended to set a new password for the Network Camera. ► If you see a dialog box indicating that your security settings prohibit running ActiveX® Contro
Краткое содержание страницы № 15
3. Refresh your web browser, then install the Active X® control. Follow the instructions to complete installation. Using RTSP Players To view the H.264 streaming media using RTSP player, you can use VLC media player. And set the RTSP port to 554. 1. Launch the RTSP player (VLC media player). 2. Choose File > Open network URL. A URL dialog box will pop up. 3. The address format is rtsp://:/. For example, rtsp://192.168.0.194:554/live
Краткое содержание страницы № 16
Live Video A click of the Menu button on the left of a screen displays MENU. MENU PTZ Control, Snapshot, Resize ON/OFF, JPEG, and Close are displayed. 15
Краткое содержание страницы № 17
PTZ Control Pan/Tilt Mouse PTZ: Use Mouse PTZ to control the camera PTZ by clicking the screen and sliding the mouse in that direction Zoom IN/OUT is controlled by the mouse scroll wheel. Up/Down / Left/Right / Upper Left / Upper Right / Lower Left / Lower Right: Click these buttons to move the camera in the intended direction. Click and hold to continuously move the camera. Pan Speed / Tilt Speed: Adjust the pan and tilt speed. The higher value indicates faster speed.
Краткое содержание страницы № 18
Zoom / Focus / Iris Zoom In / Zoom Out: Zoom In expands the view and Zoom Out reducesthe view. Click and hold to continuously zoom the camera. Focus Near / Focus Far: When clicked, focus will be set to manual mode and the lens focus will be adjusted. If the Pan/Tilt/Zoom button is clicked, it will return to Auto Focus. NOTE: In a wide angle, the manual focus increments increase. Iris Open / Iris Close: When clicked, iris will be set to manual mode and the iris will be adjusted.
Краткое содержание страницы № 19
Frame: Operation of zoom and tilt is the same as in Auto Scan. The camera will move in 45-degree increments (called stops) horizontally until a manual pan, tilt, zoom, or Stop operation is performed. Random: Operation of zoom and tilt is the same as in Auto Scan. The dome camera will move between random stops until a manual pan, tilt, Zoom, or Stop operation is performed. Auto Patrol The Auto Patrol feature will repeat a pattern of up to 128 presets. To set the moving speed, refe
Краткое содержание страницы № 20
OFF: Screen size is not resized even if window size of live video is changed. Close A Menu is closed. Configuration This window and Live Video screen open first. If you click Configuration, this live video screen will close. After clicking Configuration, this Information window will open. FW Version and Mac Address are shown. (MCU Version is information required for after sales service.) 19
