Краткое содержание страницы № 1
NETWORK CAMERA
Model:
IK-WD12A
User's Manual
For information on our latest products and peripheral devices, refer to the
following Website:
http://www.toshibasecurity.com
If the URL changes, refer to the Toshiba website (http://www.toshiba.com/).
Краткое содержание страницы № 2
Table of Contents Introduction ������������������������������������������������������������������������������������������������������������������������������������������������������������������ 4 ImportantSafeguards �������������������������������������������������������������������������������������������������������������������������������������������������� 6 ImportantSafeguards(Cont�
Краткое содержание страницы № 3
T roubleshooting ������������������������������������������������������������������������������������������������������������������������������������������������������� 1 10 Reboot and restore ............................................................................................................................................. 110 Audio .........................................................................................................................................................
Краткое содержание страницы № 4
Introduction FCC (USA)-INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, th
Краткое содержание страницы № 5
Thank you for purchasing the IK-WD12A Network Camera. Before you start using the camera, read this User's Manual carefully to ensure correct usage. Once you have finished reading this User's Manual, keep it in a convenient place for future reference. The design, specifications, software, and User's Manual contents are subject to change without prior notice. Terms and Trademarks l The term "OS" is used in this manual to indicate operating systems compatible with this product. ® ® ® -- Windo
Краткое содержание страницы № 6
Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the product and in the user's manual. 4. Follow Instructions Follow all operating and use instructions. 5. Cleaning . Disconnect this camera from the power supply before cleaning 6. Attachments D o not use attachments not recommended by the camera
Краткое содержание страницы № 7
13. Lightning For additional protection on this camera during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the camera due to lightning and power- line surges. If lightning occurs, do not touch the unit or any connected cables in order to avoid electric shock. 14. Overloading Do not overload the power supply or extension cords as this can result
Краткое содержание страницы № 8
Important Safeguards (Cont.) CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral
Краткое содержание страницы № 9
Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction. l Treat the camera with care Dropping or subjecting the camera to intense vibration may cause it to malfunction. l Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near
Краткое содержание страницы № 10
Precautions for Use Disclaimer We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in any of the following cases: 1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or accidental; use under extreme operating conditions. 2. Malfunction or non-function resulting in indirect, additional or consequential damages, including but not limited to loss of expected income and suspension of busine
Краткое содержание страницы № 11
AC Adapter Be sure to use only the supplied AC adapter. Using a different AC adapter may cause the camera to malfunction, heat up, or catch fire. Before using the AC adapter, carefully read and observe the Important Safeguards ( → page 6) and the notes below. ● Plug the AC adapter into the 100-240V AC outlet. If inserting it into other than 100-240V AC outlet, it may result in electric shock or fire hazard. ● Do not repair, modify or disassemble the AC adapter. It may result in electric shock
Краткое содержание страницы № 12
Specifications AC adapter (AH1812-B) Power source : 100-240V AC 50/60 Hz 18 W Rated output : 12V DC, 1.5 A Ambient temperature guaranteed for performance : 0° C to 40° C (32° F to 104° F) Storage temperature : -25° C to 85° C (-13° F to 185° F) Maximum external dimensions : 34.5 x 75 x 46.5 mm (1.358 x 2.953 x 1.831 inches) (width x height x depth) Cord length : 1800 mm (70.866 inches) 12
Краткое содержание страницы № 13
Package Contents IK-WD12A AC Adapter l l l CD-ROM l Alignment Sticker IK-WD12A Ver. WD12-01 l Warranty Card l Quick Start Guide and Important Safeguards l Torx driver l Screws and I/O Connector 13
Краткое содержание страницы № 14
MODEL No. IK-WD12A DC INPUT : 12V 0.6A S/N: A1010XXXX MAC:0002D1XXXXXX Physical Description Light Sensor Lens SD/SDHC Card Slot Tilt Adjustment Screw Built-in Microphone Status LED Power Cord Socket Ethernet 10/100 RJ45 Recessed Reset Button Socket Focus Controller Zoom Controller Rotation Adjustment Screw Pan Adjustment Screw INT. NC I / O ON External/Internal 1 2 General I/O EXT NC 1 2 3 4 AUDIO OUT MIC OIN Microphone Switch Terminal Block Audio Out Microphone In
Краткое содержание страницы № 15
NO TE ● 12V DC is outputted from 1-pin only when connected to a power supply. The diagrams below apply when "Digital Input" is used for an alarm input. 15
Краткое содержание страницы № 16
Status LED The LED indicates the status of the Network Camera. Item LED status Description All LED lit=> All LED unlit=> Steady Red => 1 System booting Steady Red + Blink Green once per sec. 2 Steady Red Power on; Network fail 3 Blink Green every 1 sec. Network works 4 Blink Orange/ Yellow every 0.15sec Upgrading F/W 5 Blink Red every 0.15sec Restore default Press the reset button until all LEDs blink fast 6 Reset button for reset (0.15sec/time), then release the reset button Hardware Reset T
Краткое содержание страницы № 17
SD/SDHC Card and Capacity This network camera is compliant with SD/SDHC 16GB / 8GB and other preceding standard SD cards for local storage. NO TE ● There is a limit to the number of rewrites that is possible with the SD memory card. Replacing the SD memory card when performing periodic maintenance of the camera is recommended. ● Do not use 512MB and below SD memory cards. ● The Camera system reserves approximately 60MB in SD memory cards. Any images are not recordable on this space. ● Careful
Краткое содержание страницы № 18
P A R T I T I O N L I N K R E C E I V E P O W E R C O L L I S I O N 1 2 3 4 5 Installation Hardware Installation Please verify that your product package contains all the accessories listed in the Package Contents listed on page 10. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5. Hardware Installation is shown in the Quick Start Guide(QSG). Please refer to page 12 of the QSG. Network De
Краткое содержание страницы № 19
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168.0.3, please forward the following ports for the Network Camera on the router. ■ HTTP port ■ RTSP port ■ RTP port for audio ■ RTCP port for audio ■ RTP port for video ■ RTCP port for video If you have changed the port numbers on the Network page, please open the ports accordingly on your router. For information on how to forward ports on the router, please refer to your router’s user’s manual. 3.
Краткое содержание страницы № 20
Software Installation Installation Wizard (IW), a free-bundled software packaged in the product CD, helps to set up your Network Camera in a LAN. 1. Install the IW under the Software Utility directory from the software CD. Installation Wizard Double click the IW shortcut on your desktop to launch the program. 2. The program will analyze your network environment. After your network environment is analyzed, please click Next to continue the program. 3. The program will search for Network Ca
