Краткое содержание страницы № 1
TK-C215V4_V12_EN.book Page 1 Wednesday, August 2, 2006 1:18 PM
DOME CAMERA
INSTRUCTIONS
TK-C215V4
(A)
TK-C215V12
*TK-C215V4 is used in the above illustration.
For Customer Use:
Enter below the Serial No. which is located on the body.
Retain this information for future reference.
Model No. TK-C215V4/TK-C215V12
Serial No.
LST0420-001B
Краткое содержание страницы № 2
TK-C215V4_V12_EN.book Page 2 Wednesday, August 2, 2006 1:18 PM Introduction Safety Precautions Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordanc
Краткое содержание страницы № 3
TK-C215V4_V12_EN.book Page 3 Wednesday, August 2, 2006 1:18 PM I This installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70. INFORMATION FOR USA Any Mention in this manual of Alarm inputs INFORMATION have not been evaluated by UL to be used for This equipment has been tested and found to Burglar Alarm Functionality. comply with the limits for a Class B digital Embedding of cameras in the ceiling may not device, pursuant to Part 15 of the FCC Rules.
Краткое содержание страницы № 4
TK-C215V4_V12_EN.book Page 4 Wednesday, August 2, 2006 1:18 PM Introduction These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for clean
Краткое содержание страницы № 5
TK-C215V4_V12_EN.book Page 5 Wednesday, August 2, 2006 1:18 PM Contents Introduction Safety Precautions ......................................... 2 Contents......................................................... 5 Characteristics ............................................... 6 Operating Precautions ................................... 7 Name of Parts ................................................ 8 Camera....................................................... 8 Camera (Interior).........
Краткое содержание страницы № 6
TK-C215V4_V12_EN.book Page 6 Wednesday, August 2, 2006 1:18 PM Introduction Thank you for purchasing this product. (These instructions are for: TK-C215V4U/TK-C215V12U.) Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible performance is obtained. Characteristics Realizing a High Picture Quality This camera realizes 540 TV lines and S/N50 dB by employing a highly sensitive CCD with 380,000 pixels and a high-re
Краткое содержание страницы № 7
TK-C215V4_V12_EN.book Page 7 Wednesday, August 2, 2006 1:18 PM If the DAY/NIGHT switch is turned on, the mode changes automatically to black and Operating Precautions white in dark places. As the sensitivity increases, the image may look grainy and To save energy, when it is not being used turn white spots may appear. the system’s power off. When changing modes, bright portions of This camera has been designed for indoor image may be emphasized but this is not a use. It cannot b
Краткое содержание страницы № 8
TK-C215V4_V12_EN.book Page 8 Wednesday, August 2, 2006 1:18 PM Introduction Name of Parts Camera J I TK-C215V12 only H G A B F B C A B D E A Mounting hole (elliptical) x 4 E Inner Dome Use these when mounting the camera to the Before mounting the camera, remove it and electrical box. (A pg. 22) perform switch setting and image angle setting. (A pg. 18, 20) B Mounting hole (round) x 4 F Wiring Hole Use these when mounting the camera to the ceiling or wall. (A pg. 18, 20) Break and use this
Краткое содержание страницы № 9
TK-C215V4_V12_EN.book Page 9 Wednesday, August 2, 2006 1:18 PM Camera (Interior) The dome cover, inner dome and outer case are removed. Procedures for removal. (A pg. 18 AEmbedding the camera to the ceilingB, Step 3. to Step 5.) W Lens (A Next page) K Camera Unit (Rear) X V U P T S R L Q M P N O *TK-C215V4 is used in the above illustration. K Strap S Pan fastening Screw A plate to connect the camera unit and the Ensure to loosen the screw before setting. dome cover. Further tighten the screw
Краткое содержание страницы № 10
TK-C215V4_V12_EN.book Page 10 Wednesday, August 2, 2006 1:18 PM Introduction A [RESET/SPOT] RESET/SPOT button Setting the Lens and When this button is pressed, the value of the white balance or phase adjusted manually is Switches (TK-C215V4) reset to the default value. ● When the 2 [SELECT] switch is set to Set the video setting switches on the camera unit WHT.BAL., the white balance is reset to the before mounting it. default value. To set the switches, use a fine-tipped screwdriver. Wh
Краткое содержание страницы № 11
TK-C215V4_V12_EN.book Page 11 Wednesday, August 2, 2006 1:18 PM 4. [WHT.BAL.] ATW/MANUAL selection switch. D [IRIS LEVEL] Iris level adjustment For selecting whether to adjust the white For adjusting the level of the automatic balance automatically or manually. aperture control lens. This adjustment only When the setting is changed from manual to needs to be made when required. Use this to ATW, the setting values in the manual mode accommodate particular shooting conditions. will be reset.
Краткое содержание страницы № 12
TK-C215V4_V12_EN.book Page 12 Wednesday, August 2, 2006 1:18 PM Introduction B [ZOOM/FOCUS, MEMORY] zoom, focus adjustment switches/position memory Setting the Lens and button Switches (TK-C215V12) Use the [JTELE] and [KWIDE] switches to zoom, and the [HFAR] and [INEAR] switches Set the video setting switches on the camera unit to adjust focus. (A pg. 25) before mounting it. Press the [MEMORY] button to register the To set the switches, use a fine-tipped screwdriver. position. (A pg.
Краткое содержание страницы № 13
TK-C215V4_V12_EN.book Page 13 Wednesday, August 2, 2006 1:18 PM 2. [SELECT] WHT.BAL./PHASE setting switch. 6. [DAY/NIGHT] Easy DAY & NIGHT switch. WHT.BAL.: To capture a subject with continually changing The F [R/B, +/-] buttons are used as [R/B] brightness (day/night), set this switch to AONB adjustment buttons. The camera automatically captures the image PHASE: in color when the subject is bright, and in The F [R/B, +/-] buttons are used as [+/-] black and white mode when it is dark. a
Краткое содержание страницы № 14
TK-C215V4_V12_EN.book Page 14 Wednesday, August 2, 2006 1:18 PM Installation and connection DC 12 V or AC 24 V power supply cable About Connection Cables Connect the DC 12 V or the AC 24 V power The maximum connection distance varies with supply to the DC 12 V/AC 24 V terminals on the terminal board. To prevent connection errors or a the type of cable used. Please refer carefully to the table for each cable during connection. cable disconnection, we recommend the use of lug plates for th
Краткое содержание страницы № 15
TK-C215V4_V12_EN.book Page 15 Wednesday, August 2, 2006 1:18 PM Electrical Specifications of Alarm Input Terminals (TK-C215V12 only) ● To prevent penetration of noise in the internal circuitry, apply a non-voltage contact signal to the ALARM input terminal. Never apply a voltage. ● Apply an alarm signal for at least 200 ms. If it is shorter, it is not guaranteed that the signal will be recognized as an alarm signal. ● Under the alarm status (status when the metal contact is “make”), se
Краткое содержание страницы № 16
TK-C215V4_V12_EN.book Page 16 Wednesday, August 2, 2006 1:18 PM Installation and connection System diagram TK-C215V4 Video signal Power TK-C215V4 Video signal Power TK-C215V12 Video signal Power Alarm signal METAL CONTACT Power Unit DC 12 V or AC 24 V VIDEO IN MONITOR AUDIOIN 1234 5678 9 10 11 12 13 14 15 16 VIDEOIN THRUOUT SCSI CAUTION AUDIOOUT VIDEOOUT RISK OF ELECTRIC SHOCK DO NOT OPEN LAN RS-232C UPS 1 2 1 2 AVIS:RISQUE DE CHOC ELECTRIQ 1 4/ 16 5 8 ACIN Digital Video (220V–240V ) SIGNA
Краткое содержание страницы № 17
TK-C215V4_V12_EN.book Page 17 Wednesday, August 2, 2006 1:18 PM Selecting a mounting method Mounting the Camera Select a method for mounting the camera according to the intended purpose. Getting Started AEmbedding the camera to the ceilingB CAUTION: (A pg. 18) ● When mounting the camera to the ceiling, ensure to wear safety glasses to protect the eye AWhen mounting the camera directly to the from any falling object. ceiling or on the
Краткое содержание страницы № 18
TK-C215V4_V12_EN.book Page 18 Wednesday, August 2, 2006 1:18 PM Installation and connection 4. Remove the inner dome Mounting the Camera The inner dome is secured with claws (3 locations). Hold the inner dome and remove (continued) it from the claws. 5. Remove the outer case. Embedding the camera to the ceiling (This method does not require an outer case.) * Make use of a ceiling material with a thickness A Loosen the camera fastening screw with a between 9.5 mm to 22 mm. screwdriver B To
Краткое содержание страницы № 19
TK-C215V4_V12_EN.book Page 19 Wednesday, August 2, 2006 1:18 PM Connecting Mounting 1. Attach the fall prevention wire to the 1. Align j with the shooting direction when camera, followed by attaching it to the mounting the camera. ceiling slab (Fall prevention wire is not included.) 2. Fasten the camera. (x3 locations) 2. Connect the video signal cable. (A pg. 14) A Press the screw head of the ceiling mount Lower the cover and connect the connectors. bracket all the way in using a cros
Краткое содержание страницы № 20
TK-C215V4_V12_EN.book Page 20 Wednesday, August 2, 2006 1:18 PM Installation and connection 6. Loosen the pan fastening screw. Mounting the Camera CAUTION: (continued) ● Moving the lens unit without loosening the pan fastening screw may damage the lens unit. When mounting the camera directly to the ceiling or on the wall 7. Set the switches for video images. When mounting to a wall, replace areas indicated (TK-C215V4A pg. 10) as “ceiling” i
