Краткое содержание страницы № 1
TK-C205VP DOME CAMERA
DOME CAMERA
CAMÉRA À DÔME
CÁMARA DOMO
INSTRUCTIONS
TK-C205VP
MANUEL D’INSTRUCTIONS
INSTRUCCIONES
For Customer Use:
VICTOR COMPANY OF JAPAN, LIMITED Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
®
Model No. TK-C205VP
is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD.
®
is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.
Printed in Thailand
Serial No.
LWT0153
© 2004 VICTOR CO
Краткое содержание страницы № 2
15. Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous These are general IMPORTANT SAFEGUARDS and certain items may not apply voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any to all appliances. kind on the appliance. 16. Do not attempt to service this appliance yourself as opening or removing covers may expose you to IMPORTANT SAFEGUARDS dangerous voltage or other hazards. Refer all servic
Краткое содержание страницы № 3
Thank you for purchasing this product. Safety Precautions (These instrustions are for TK-C205VPU and TK-C205VPE) Before beginning to operate this unit, please read the instruction manual FOR USA AND CANADA INFORMATION (FOR CANADA) carefully in order to make sure that the best possible performance is obtained. RENSEIGNEMENT (POUR CANADA) CAUTION CONTENTS This Class B digital apparatus complies with RISK OF ELECTRIC SHOCK Canadian ICES-003. Features ................................................
Краткое содержание страницы № 4
Краткое содержание страницы № 5
Краткое содержание страницы № 6
Names and Operations of Parts Installation and connection Main unit bottom/side/top System diagram Camera 1 bottom side top Video signal Power Camera 2 Video signal Power 121mm 3 (4 /4") Camera 3 Video signal Power MONITOR DVR, etc. Camera 4 Video signal SR-L910E REC STOP/EJECT CHECK REC VIDEO CASSETTE RECORDER OPERATE PAUSE/ OPE. LOCK REVERSE STILL PLAY COUNT/ CLOCK MENU SHIFT/TRACKING /CANCEL RESET REW FF MODE TIME TIMER REC SET/V.LOCK RESET AL/PL Power 1 3 Safety cable installation screw C
Краткое содержание страницы № 7
Installation and connection Mounting the Base to the Ceiling Remove the camera unit from the base and mount the base to the pipe. 4. Connecting the safety cable 4. 5. • Do not remove the protective sheet affixed to the dome cover until installation work is To prevent dropping, connect the unit to Safety cable Seal tape completed. a sturdy location (ceiling slab or chan- Removing the sheet during installation may result in scratching of the dome cover. Pipe 15 nel) and safety cable. 12mm( /32") o
Краткое содержание страницы № 8
Краткое содержание страницы № 9
Installation and connection Adjusting the Camera Angle Attach the Dome cover Camera angle, zoom and focus are adjusted. The dome cover is mounted on the base. 1. Remove dirt and soiling on the dome Horizontal rotation cover. Otherwise, such dirt and soiling Horizontal (adjustable range: 350°) Lock screw may appear in the camera image. 1. Loosen the horizontal LOCK screw. Variable range 350˚ 2. Holding the both tilt lock screws, rotate 2. Set the dome cover to the unit by horizontally. aligning
Краткое содержание страницы № 10
Installation and connection When the Dome camera cannot be installed to the Ceiling When installing the Dome camera to the electrical box When installation cannot be made using the conduit holes, install the dome camera to the When installation cannot be made to the ceiling, use the conduit hole on the main unit side electrical box. to install to the pipe. 1. Follow steps 1 ~ 5 of Mounting the Base 1. Follow steps 1 ~ 3 of Mounting the Base 4 Inch squara electrical box to the Ceiling. to the Cei
Краткое содержание страницы № 11
9 115.2 (4 /16") 53.7 1 ( SR 2 /8") Others SPECIFICATIONS About White-spot correction As a general characteristic unique to CCD, white spots may appear on the screen when CAMERA GENERAL Power requirement: operating under high temperature. Signal system: AC 24 V ` 50 Hz / 60 Hz U type based on NTSC standard In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature. or DC 12 V E type based on PAL standard Image device: 1/4” IT CCD Power consumption: U type
Краткое содержание страницы № 12
Cut the wires Base Cap Wires Cut English Note when installing Italiano Note per l’installazione The base of this unit is noninsulated with the internal board grounding. When installing this unit to the conduit, always cut off the wires (2 pieces) as shown in the diagram above. Influence from devices that easily emit noise (power pumps, air conditioners, lighting, etc.) and dielectric effects from lightning can be reduced by insulating the base. Français Remarque pour l’installation LWT0178 (TK
