Краткое содержание страницы № 1
AutoDome 600 Series Analog PTZ Cam-
era
VG5 600 Series
en User Manual
Краткое содержание страницы № 2
Краткое содержание страницы № 3
AutoDome 600 Series Analog PTZ Camera Table of Contents | en 3 Table of Contents 1 Getting Started 5 1.1 Powering On 5 1.2 Establishing AutoDome Control 5 1.2.1 Basic Keyboard Operation 6 1.2.2 Keyboard Commands 6 1.3 Setting the Camera Address 7 1.3.1 FastAddress 7 1.4 Setting Passwords 8 1.4.1 Special Passwords 8 2 On-Screen Display Menu Navigation 9 2.1 Setup Menu 9 2.2 Camera Setup Menu 10 2.3 Lens Setup 12 2.4 PTZ Setup Menu 13 2.5 Display Setup Menu 15 2.6 Communication Setup Menu 17 2.7 A
Краткое содержание страницы № 4
4 en | Table of Contents AutoDome 600 Series Analog PTZ Camera 5.1.2 Bosch Menu (locked) 37 5.1.3 PTZ Setup (unlocked) 38 5.1.4 Other Menus 39 6 Keyboard Commands by Number 40 7 Advanced Features 44 7.1 Alarm Rules 44 7.1.1 Controlling Alarm Rules 44 7.1.2 Alarm Rule Examples 44 7.2 AutoTrack Operation 48 7.2.1 AutoTrack Settings and Recommendations 48 7.2.2 AutoTrack Optimization 49 7.3 Virtual Masking 50 7.4 Privacy Masking 50 7.5 Motion Detection with Region of Interest (Preset positions 90 t
Краткое содержание страницы № 5
AutoDome 600 Series Analog PTZ Camera Getting Started | en 5 1 Getting Started Install and wire the AutoDome according to the VG5 AutoDome Installation Manual. A typical system includes a keyboard, matrix switcher, monitor, and appropriate wiring connections. Please refer to the individual product manuals for complete installation and setup instructions for each of the system components. 1.1 Powering On When you turn the AutoDome power on there is a ten (10) second pause before the dome star
Краткое содержание страницы № 6
6 en | Getting Started AutoDome 600 Series Analog PTZ Camera 1.2.1 Basic Keyboard Operation The following tables summarize the basic operations for a standard keyboard and the functions available to control an AutoDome camera. Typical Keyboard Usage Features Function Keys Selects a specific control setting. Number Keys Inputs a number from 0 to 9. Camera Key Selects a camera number. Enter Key Inputs a selection. Focus Key Sets the lens focus or makes a menu selection in OSD mode. Iris Key Sets
Краткое содержание страницы № 7
AutoDome 600 Series Analog PTZ Camera Getting Started | en 7 1.3 Setting the Camera Address Once the AutoDome power is turned on and homing is complete, you must set the camera address. You may also want to assign a password and customize some of the AutoDome default settings. NOTICE! You do not need to set a camera address if using Bilinx or Ethernet communication. See the VG5 AutoDome Installation Manual to configure an AutoDome for Bilinx or Ethernet operation. 1.3.1 FastAddress FastAddr
Краткое содержание страницы № 8
8 en | Getting Started AutoDome 600 Series Analog PTZ Camera 1.4 Setting Passwords Passwords are used to control access to locked command menus. Unlocked commands are available to all users. Passwords are four (4) digits in length. 1.4.1 Special Passwords Password Security Level 0000 (default) Enables security and requires a user to enter the unlock command OFF-90-ENTER before invoking a locked command. 9999 Disables all security and allows all users to access locked commands. To set or change
Краткое содержание страницы № 9
AutoDome 600 Series Analog PTZ Camera On-Screen Display Menu Navigation | en 9 2 On-Screen Display Menu Navigation The AutoDome is programmed through the on-screen display (OSD) menus. To access the OSD menus, you must open the main Setup Menu. Menu items marked with an asterisk (*) are default settings, unless otherwise noted. NOTICE! After a period of 4.5 minutes of inactivity, a menu times-out and exits without warning. Some unsaved settings in the current menu can be lost. 2.1 Setup Menu
Краткое содержание страницы № 10
10 en | On-Screen Display Menu Navigation AutoDome 600 Series Analog PTZ Camera Setup Menu Choices: Menu Description Exit Exits the menu. Camera Setup Accesses adjustable camera settings such as: white balance, gain, sharpness, sync, line lock, backlight, shutter, and night mode. Lens Setup Accesses adjustable lens settings such as: focus, iris, zoom speed, and digital zoom. PTZ Setup Accesses adjustable pan/tilt/zoom (PTZ) settings such as: Autopan, tours, PTZ speed, inactivity period, AutoP
Краткое содержание страницы № 11
AutoDome 600 Series Analog PTZ Camera On-Screen Display Menu Navigation | en 11 Camera Setup Menu Choices: Menu Description Sub-menu / Description Default Setting Exit Exits the menu. White Balance Maintains proper color reproduction Extended ATW: Adjusts camera color Extended as the color temperature of a scene using extended range. ATW changes. For example, from daylight ATW: Adjusts camera color constantly. to fluorescent lighting. Indoor W.B.: Optimizes camera color for typical indoor con
Краткое содержание страницы № 12
12 en | On-Screen Display Menu Navigation AutoDome 600 Series Analog PTZ Camera Menu Description Sub-menu / Description Default Setting Shutter Mode Turns Auto SensUP on or off. Auto SensUP or OFF Auto SensUP Shutter Adjusts the electronic shutter speed Sliding scale: 1/60 sec. (AES). – (60 at extreme left to 1/10000) + (NTSC) or 1/50 sec. (PAL) Auto SensUP Sets the limit for sensitivity when the 15x, 7.5x, 4x, or 2x 15x Max. shutter speed is set to Auto SensUP. Night Mode Selects night mo
Краткое содержание страницы № 13
AutoDome 600 Series Analog PTZ Camera On-Screen Display Menu Navigation | en 13 Lens Setup Menu Choices: Menu Description Sub-menu / Description Default Setting Exit Saves and exits the menu. Auto Focus Automatically focuses on the CONSTANT: Auto Focus is always active, even SPOT subject in the center of the while the camera is moving. screen. MANUAL: Auto Focus is inactive; manual focus must be used. SPOT: The camera activates Auto Focus after the camera stops movement. Once focused, Auto F
Краткое содержание страницы № 14
14 en | On-Screen Display Menu Navigation AutoDome 600 Series Analog PTZ Camera Menu Description Sub-menu / Description Default Setting Exit Exits the menu. AutoPan Adjusts speed of camera during Sliding scale: 30º/sec. AutoPan and AutoScan. – (1º/sec. to 60º/sec.) + Tour 1 Period Changes dwell time between Sliding scale: 5 sec. presets during the tour. – (3 sec. to 10 min.) + Tour 2 Period Changes dwell time between Sliding scale: 5 sec. presets during the tour. – (3 sec. to 10 min.) + PTZ Fix
Краткое содержание страницы № 15
AutoDome 600 Series Analog PTZ Camera On-Screen Display Menu Navigation | en 15 2.5 Display Setup Menu Provides access to display settings that can be changed or customized. Menu items with an * are the default settings. Display Setup Exit... * Title OSD: MOMENTARY * Camera OSD: ON Display Adjust: Sector Blanking... Privacy Masking... Edit Sector Title Edit Scene Title Restore Defaults * = Factory Setting Focus / Iris: Select Display Setup Menu Choices: Menu Description Sub-menu / Description
Краткое содержание страницы № 16
16 en | On-Screen Display Menu Navigation AutoDome 600 Series Analog PTZ Camera Menu Description Sub-menu / Description Default Setting Sector Blanking Allows video blanking of selected Exit: Exits the menu. sectors. Available sectors are 1 Sector (1-16): Press Focus/Iris to blank or through 16. Follow the on-screen clear a sector. instructions. Privacy Masking Allows masking of sensitive Exit: Saves and exits menu. areas. Up to 24 privacy masks are Mask: 1 to 24 masking areas. Follow the avai
Краткое содержание страницы № 17
AutoDome 600 Series Analog PTZ Camera On-Screen Display Menu Navigation | en 17 2.6 Communication Setup Menu The Communication Setup Menu provides access to baud rate and Bilinx control settings. Menu items marked with an asterisk (*) are the default settings. Communication Setup Exit... * AutoBaud: ON * Baud Rate 9600 * Bilinx: ON Restore Defaults... * = Factory Setting Focus / Iris: Select Communication Setup Menu Choices: Menu Description Sub-menu / Description Default Setting Exit Saves an
Краткое содержание страницы № 18
18 en | On-Screen Display Menu Navigation AutoDome 600 Series Analog PTZ Camera 2.7 Alarm I/O Setup The Alarm Setup Menu provides access to the Alarm I/O Setup Menu to establish the alarm inputs and outputs and to configure alarm rules. Alarm I/O Setup Inputs Setup Exit... Exit... Inputs Setup... 1. Alarm Input 1 N.C.S. Outputs Setup... 2. Alarm Input 2 N.O.S. Physical Rule Setup... 3. Alarm Input 3 N.O. Input 1-7 Restore Defaults... 4. Alarm Input 4 N.C. 5. Alarm Input 5 N.O. 6. Alarm Input 6
Краткое содержание страницы № 19
AutoDome 600 Series Analog PTZ Camera On-Screen Display Menu Navigation | en 19 Outputs Setup Menu Outputs Setup... Exit... 1. Alarm Output 1 N.O. 1-4 2. Alarm Output 2 N.O. Physical 3. Alarm Output 3 N.O. Outputs 4. Alarm Relay N.O. 5. NONE 6. Aux On 1 5-12 7. Aux Off 8 Command 8. Shot 99 Outputs 9. OSD 10. Transmit 11. NONE 12. NONE Focus / Iris: Select Type Right / Left: Select Mode Outputs Setup Menu Choices Menu Description Sub-menu / Description Default Setting Exit Saves and exits the m
Краткое содержание страницы № 20
20 en | On-Screen Display Menu Navigation AutoDome 600 Series Analog PTZ Camera 2.8 Rule Setup Menu The Rule Setup Menu shows the status of the rules and lets you add new rules or modify an existing rule. The default setting is Empty. NOTICE! You can program a total of twelve rules. You must define the inputs and outputs before you program a rule. See Section 2.7 Alarm I/O Setup, page 18, to configure alarm inputs and outputs. Rule Setup... Rule 1 Exit... Exit... 1. Rule 1 Enabled Enabled YE
