Краткое содержание страницы № 1
OPERATING INSTRUCTIONS
Wireless Display
with Magnetic Stripe Reader
and Fingerprint Scanner
Model No. CF-VDW07CRFM
Contents
Read Me First ................................. 2
First-time Operation ...................... 6
Starting Up/Shutting Down ......... 11
Touchscreen ................................ 13
Software Keyboard ...................... 16
Battery Power .............................. 18
Setting the Wireless Display ...... 22
Changing the Wireless Display Settings ... 26
Magnetic Stripe
Краткое содержание страницы № 2
Read Me First Information to the User This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety stan- dards and recommendations, we believe this product is safe for use by consumers. These standards
Краткое содержание страницы № 3
For U.S.A. Federal Communications Commission Rules. Operation is subject to the following Radio Frequency Interference two conditions: Statement (1) This device may not cause harmful interference, and Note: This equipment has been tested and (2) This device must accept any interference found to comply with the limits for a Class B received, including interference that may digital device, pursuant to Part 15 of the FCC cause undesired operation. Rules. These limits are designed to provide reaso
Краткое содержание страницы № 4
Read Me First Precautions (Battery Pack) Care should be exercised with regard to the Do not use this wireless display with a battery pack other than the following in order to avoid the possibility one specified (the one included with of overheating, fire, or damage. the wireless display or the specified battery pack sold separately) Avoid Heat Do Not Put into a Microwave Do not throw the battery pack Do not put the battery pack into a into a fire or expose it to exces- microwave oven or a pressu
Краткое содержание страницы № 5
NOTE The battery pack may become warm during recharging or normal use. This is com- pletely normal. Recharging will not commence outside of the allowable temperature range (0 °C to 45 °C {32°F to 113 °F}) page 18. Once the allowable range requirement is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 °C {50 °F} or less.) If the temperature is low, the operating time is
Краткое содержание страницы № 6
First-time Operation This wireless display features a touchscreen function, which makes computer operation pos- sible by simply touching the surface of the wireless display. Wireless Display........................ 1 Operating Instructions ............ 1 AC Adaptor ........... 1 AC Cord ................1 Battery Pack ......... 1 Model No : CF-AA1623A Model No : CF-VZSU21 Stylus .................... 1 CD-ROM ................1 Soft Cloth.............. 1 The stylus is in the wireless display at the
Краткое содержание страницы № 7
Strap Fingerprint Scanner page 30 DC-IN Jack DC-IN 16V page 20 Battery Pack Stylus NOTE Select [Disabled] with the following procedure. [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager] - [Network adapters] - [PRISM2 IEEE 802.11 PC CARD Adapter] - [Advanced] - [Driver based IBSS] A lithium ion battery that is recyclable powers the product you have purchased. Please call
Краткое содержание страницы № 8
First-time Operation Install MeiWDS Program/Software Keyboard CAUTION Prepare the CD-ROM, which is attached to the wireless display, and the CD/DVD drive. Install the software to the computer compatible to the wireless LAN. Install MeiWDS program: 1 Place the CD-ROM attached to the wireless display into the CD/DVD drive. 1 2 Select [start] - [Run], input [x:\meiwds\setup.exe]* and select [OK]. Follow the on-screen instructions. 3 Restart the computer. 4 After restart, the Wireless Display Setup
Краткое содержание страницы № 9
Setup the Wireless Display Latch 1 Slide the latch to the right, and open the cover, then in- sert the battery pack in the wireless display. After in- serting the battery pack, close the cover, then slide the latch to the left. CAUTION Be sure to insert the battery pack as illustrated. Connector Tab 2 Connect the wireless display to a power outlet and turn on the wireless display. ( page 12) 3 The following screen should appear. Power Switch Select network type. AdHoc
Краткое содержание страницы № 10
First-time Operation 4 The following screen should appear. Change setting on host PC to the following value, reboot the host PC, then select "Connect" below. Wireless LAN card Network Type : AdHoc SSID : cfvdw07-xxxxx WEP Encryption : disable TCP/IP Class A Class B Class C IP Address : 10.57.148.205 NetMask : 255.0.0.0 MeiWDS AES Encryption : disable Password : wdsp AES: Advanced Encryption Standard Connect Cancel (This screen is a sample.) Set the computer’s para
Краткое содержание страницы № 11
Starting Up/Shutting Down Starting Up CAUTION Do not maximize the MS-DOS screen. Once maximized, the connection with the wireless display is interrupted and the screen cannot be returned to its original size. 1 Turn off the computer, then connect the port replicator, external display and external keyboard. 2 Turn on the computer and then press Alt + Enter in the MS-DOS mode to return the window to its original size.
Краткое содержание страницы № 12
Starting Up/Shutting Down 1 Turn on your computer. ( Operating Instructions of the computer) 2 After confirming the “DISPLAY Power READY” indicator has lit, turn Indicator on the wireless display. Switch After has been displayed on the taskbar, turn on the wire- less display. Press the power switch and hold it down for approximately three seconds until the power indicator turns on before rele
Краткое содержание страницы № 13
Touchscreen The wireless display is equipped with a touchscreen function allowing you to perform the same operations as the mouse by touching the surface of the display with the stylus. Moving the cursor Clicking Cursor One tap Double-clicking Dragging Two quick taps Touch and hold the object (i. e. file or icon), move your stylus on the surface (dragging the object to the desired location), then re- lease your stylus. NOTE The double-clicking speed can be set in the following procedure. [start]
Краткое содержание страницы № 14
Touchscreen Right-Clicking 1 Press R-button. 2 When “R” is displayed on R-Button R the right- lower corner One tap NOTE If the R-button is pressed again when setting right-clicking function to enable, the right-clicking function will be set to disable. CAUTION The touchscreen function can not be used in the MS-DOS mode and when using the full screen in [Command Prompt]. Handling the Touchscreen Use the stylus included with the wireless display. Do not use an implement other than the stylus that
Краткое содержание страницы № 15
Calibration Run the calibration setup when the cursor and the stylus touches do not appear to agree. 1 Press Menu button. 2 Select [Option]. 3 Select [Calibration]. Touch the five “×” marks on the calibration screen. Menu Button 1 2 ×× × 5 3×× 4 15
Краткое содержание страницы № 16
Software Keyboard When selecting [ Software Keyboard] on the taskbar or when the character input box of an application is selected, the software keyboard shown below automatically starts up, and characters can be input by using the software keyboard. We recommend leaving the software keyboard as an icon instead of closing the software key- board when it is not being used. The software keyboard will no longer start up automatically if is selected to close the keyboard. In this case, it can be re
Краткое содержание страницы № 17
Changing the Settings You can change the keyboard size, switch the keyboard to the numeric keypad, or change other settings using the system menu. 1 Select (on the top left corner of the software keyboard). 2 Add a check mark to the function you want to use. The software keyboard moves automatically so as not to hide the window currently selected. (It will not move if there is no place that it can move to.) Also, the software keyboard will move to the topmost position on the display when the c
Краткое содержание страницы № 18
Battery Power Battery Status Use the Battery Indicator to Check on the Battery Status Battery Indicator Battery Status 1 Orange* Charging 1 Green* Fully-charged Red Battery charge is low (the charge is less than approx. 9% capacity) 1 Blinking red* Battery pack or charger may not be working properly. Quickly remove the battery pack and disconnect the AC adaptor, then connect them again. If the problem persists, contact Panasonic Technical Support. 1 Blinking orange* Unable to recharge due to vio
Краткое содержание страницы № 19
Getting a detailed reading 1 Press Menu button. 2 Select [Battery]. ( page 23) Menu Button NOTE The actual remaining battery capacity and the displayed indication may differ. • The battery indicator light remains red. • The battery remaining displays 99% and the Perform the “Refresh indicator light is orange for a long period of Battery” utility. time. ( page 23) • Low battery warning appears after a short pe- riod of time. 19
Краткое содержание страницы № 20
Battery Power Replacing the Battery Pack When the charge provided by your battery pack is supplied for only a short period of time, even after fully charging according to the instructions, it may be time to replace your battery pack. The battery pack is a consumable item and therefore will require replacement (CF-VZSU21). CAUTION Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged. The battery pack is not charged
