Краткое содержание страницы № 1
Краткое содержание страницы № 2
Dear customer, Congratulations on your choice of Philips DSR 1000 satellite receiver. This Philips satellite receiver will allow you to obtain digital satellite programmes and services. We wish you much viewing pleasure with your new Philips DSR 1000. Note: This product is intended for Germany, Austria and Italy. GB CONTENTS 1. SAFETY INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2. CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 3
SAFETY INSTRUCTION Important remarks on operation The following section contains important remarks concerning the operation, location and connection of the receiver. Please read these instructions carefully before using the unit for the first time. Extended absence/use during adverse weather conditions Always switch off the unit during periods of extended absence and during thunder storms by means of the power switch located on the front right-hand side. This also applies to other units that are
Краткое содержание страницы № 4
Important remarks on location and assembly Location All electronic equipment generates heat, which is however not dangerous. Delicate furniture surfaces and finishes may become slightly discoloured over time due to the GB permanent heat source. Likewise, the feet of the equipment may cause discolouring on treated surfaces. If need be, place the unit on a suitable mat. Ventilation Heat occurring in this unit is discharged adequately. However, never install the receiver in a cabinet or on a shelf
Краткое содержание страницы № 5
CONNECTIONS The following connections are located on the back of the unit: 12 34 567 1 - 230 V/50 Hz: Connect the power cable to the power socket. 2 - AUDIO TV L & R: Audio output, left and right-hand channel for connecting to a stereo unit. 3 - TV: Connect the TV connection socket to your television unit using the SCART cable supplied. 4 - VCR: VCR SCART socket for connecting a video recorder. 5 - DATA INTERFACE: RS 232 interface for serial data transfer during servicing. 0-modem cable (pins 2
Краткое содержание страницы № 6
YOUR REMOTE GB RC : Detailed M : Activates MAIN- Remote Control func- MENU: tions on-screen- • channel Arrangement. Display (OSD) on/off. • Channel Search. • Satellite Selection. • Installation. F : Choose favourite channel list Menu: E : Switch to previous Change transparency channel of On-Screen-Display Menu: (OSD). Exit from current menu. I : Display Short and extended information 22 : Switch the receiver in and out of standby (if broadcasted) about mode. current and next pro- grammes. TV : S
Краткое содержание страницы № 7
OPERATING YOUR UNIT 3.1 LOCAL OPERATION Open (and close) the flap on the front of the unit by pressing the marked area (on the right-hand side). Local operation is by means of the keys STANDBY, V and W for switching between channels upwards/downwards (CH -/+), as well as C and B for adjusting the volume (VOL -/+). To switch between radio and TV, press the STANDBY key briefly and then within one second the C key for radio or B for TV mode. 123454 6 1 - Flap 2 - 4 Digit LED front indicator 3 -
Краткое содержание страницы № 8
3.2 REMOTE CONTROL FUNCTIONS Switching on from standby mode is done using the red key or using the number keys 0 ... 9. The unit software contains a functional description for the remote control. To consult this, simply GB press the RC key on the remote control and then the keys for which you require assistance - the appropriate help instructions appear on the screen. Exit the help menu by pressing the RC key again. The keys located around the OK key CB and VW operate the functions Volume -/
Краткое содержание страницы № 9
A favourite list is a list in which channels selected from a channel pool can be organised. By default the names of the favourite lists are pre-defined similar to the following example. However, the name of the favourite list can be changed according to individual preferences. Each favourite list has the available channel numbers P000....P999. Favourite list Name sorted channels (example) Example: F0: ALL (e.g. all free channels from the channel pool) F1: NEWS (e.g. PHOENIX, n-TV, N-24, Bloomber
Краткое содержание страницы № 10
3.6 SELECTING THE CHANNEL LANGUAGE Press the A key to display the language selection menu. The number of available languages depends on the particular channel. The choice of language is made as usual using the W and V keys. The language originally set remains selected when you quit the menu using the E key. GB The selected language is stored when you quit the menu using the OK key. N.B.: Please note that many channels only offer one language. Many radio stations do, however, offer up to 20 or
Краткое содержание страницы № 11
Deleting timer programming: Select the timer row to be deleted using the number keys 1...8 or the W or V key 1...8 and delete the programmed data using the OK key. OK N.B.: If you accidentally delete a row and wish to reconstitute the original information, exit the timer menu by pressing the E key twice. N.B.: The time and date are programmed from the DVB data transmitted by the channel. Please correct the ‘Time offset’ in the Installation menu when switching from summer to winter time and vice
Краткое содержание страницы № 12
MENU STRUCTURE 4.1 CHANNELS 4.1.1 Favourite list GB Call up the main menu using the M key and then press the OK key twice. Sorting, swapping, copying and deleting channels - in one single menu! Select one of the favourite lists 0...9. i Select the relevant satellite (e.g. Astra, Eutelsat or other). M Select the channel source (e.g. NEW or ALL channels). TV WV Select the target position in the favourite list (tip of grey or green arrow). CB Select the channel from the source channel list (right-h
Краткое содержание страницы № 13
Switching to the left menu window is done using the W and V keys; switching to the right menu window is done using the C and B keys. The highlighting of the windows heading and channel will show which window is active. For each action (copying, swapping or deleting) you thus see the appropriate TV channel in the current window. The search function also locates channels that do not contain a usable TV channel. A test picture, for example, may initially be detected and is thus stored by error
Краткое содержание страницы № 14
4.1.3 Channel pool (for advanced users) The channel pool contains all channels in alphabetical order. Selection depending on satellite is done using the M key; free or encrypted channels are chosen by pressing the TV key. All free (or all encrypted) channels on the selected satellite are contained in the «All Free» section, also the new free or encrypted channels after performing satellite search mode. GB WV Select channels in rows. CB Select channels in columns. All selected channels are set im
Краткое содержание страницы № 15
4.1.4 Parental control The five-digit security code (PIN) is set to 0 0 0 0 0 in the factory by default. a) Changing the security code (PIN) Select the «Parental control» menu using key 4 from the Main menu «Channels». Then select the {PIN} input field using key 2 or the W key and activate it by pressing the OK key. Enter the ‘old’ and your ‘new’ PIN in the following sequence. 1. Please enter the current PIN. (= 0 0 0 0 0 for first use) 2. Please enter the new PIN. 3. Please repeat the new PIN.
Краткое содержание страницы № 16
4.2 SEARCH MODE 4.2.1 Satellite search mode Satellite search mode is performed for all frequencies on the selected satellite. Select the desired settings in the menu sequence. GB Selecting the individual parameters is performed after activating using the OK key and then using the B or C key. We recommend launching the search mode occasionally in order to detect new channels. For this purpose use the basic settings shown in {bold}. If you wish to search for one single channel individually, you ca
Краткое содержание страницы № 17
4.3 SATELLITES The ASTRA 19.2° and Eutelsat 13° (Hotbird) satellites are activated as per the default factory settings. Six other satellites are pre-programmed, but not activated. If you expand your reception equipment, you can make the required settings and activations for the pre-programmed satellites in the ‘Satellite’ menu. Activate the desired satellite number, e.g. using the number keys 1...8, and call up the Input menu using the OK key. (1) Entering or amending a name Activate the {NAME}
Краткое содержание страницы № 18
4.4.2 Menu language (1) Select language. The menu language can be switched between {{German}, {English}, {French}, {Italian}, {Spanish}, {Dutch} and {Turkish}. GB (2) Select character set. Automatic switching of the character set is defined in the DVB standard - however unfortunately not all stations observe this standard with the result that characters from an incorrect character set may appear in a text. Automatic character switching is provided in this unit, however various character sets can
Краткое содержание страницы № 19
4.4.4 LNB settings (1) LNB {ON} standard setting {OFF} operation without LNB signal (e.g. only with special cabling systems) (2) In standby mode {OFF} standard setting N.B.: For certain units only use the {OFF} setting, as otherwise the receiver continues to supply power to the LNB also in standby mode. The power consumption of the receiver can thus increase from 2 watts to up to 10 watts in standby mode. {ON} The LNB power remains on in standby mode, e.g. to supply power to an appropriate mult
Краткое содержание страницы № 20
4.4.6 Download Over Air (software update via satellite) You can update the operating software and the channel lists (each individually) for your receiver via the ASTRA satellite (update via Download Over Air) using the Download sub-menu. The data for various units are transferred consecutively on a special receiving channel (thus the term data carousel). To receive this data your receiving unit must be aligned with the ASTRA satellite at GB 19.2° east. N.B.: Please note that, when updating the c
