Краткое содержание страницы № 1
SR 2000 IEM
SR 2050 IEM
Instruction manual
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Contents Contents Important safety instructions ............................................................................................................................................................. 2 The SR 2000 IEM and SR 2050 IEM transmitters ............................................................................................................................. 4 The frequency bank system .............................................................................................
Краткое содержание страницы № 4
Important safety instructions Important safety instructions 1. Read these instructions. 2. Keep these instructions. Always include these instructions when passing the transmitter on to third parties. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,
Краткое содержание страницы № 5
Important safety instructions This symbol is intended to alert the user to the risk of electric shock if the transmitter is opened. There are no user serviceable parts inside. Refer servicing to qualified personnel only. This symbol is intended to indicate the presence of important operating and maintenance instructions in the literature accompanying this transmitter. Overloading Do not overload wall outlets and extension cables as this may result in fire and electric shock. Replacement parts Wh
Краткое содержание страницы № 6
The SR 2000 IEM and SR 2050 IEM transmitters The SR 2000 IEM and SR 2050 IEM transmitters With the SR2000IEM and SR2050IEM 2-channel/stereo monitoring transmitters, musicians, video and sound amateurs, reporters/broadcasters, etc. can directly monitor the received sound signals without troublesome cables or monitor speakers being required. In addition, the transmitters can also be used for any application where talkback signals are to be transmitted. Features of the SR 2000 IEM and SR 2050 IEM t
Краткое содержание страницы № 7
Delivery includes Each of the channels in the frequency banks “1” to “20” has been factory-preset to a fixed transmission frequency (frequency preset). The factory-preset frequencies within one frequency bank are intermodulation-free. These frequencies cannot be changed. For an overview of the frequency presets, please refer to the supplied frequency information sheet. Updated versions of the frequency information sheet can be downloaded from the corresponding product page on our website at www.
Краткое содержание страницы № 8
Product overview Product overview Overview of the SR 2000 IEM/SR 2050 IEM transmitter The SR2050IEM twin transmitter has the same operating elements as the SR2000IEM transmitter. All information contained in this instruction manual refers to both transmitters. SR 2050 IEM
B.Ch: 5.14 **2050** B.Ch: 5.14 **2050** Stereo Transmitter SR 2050 IEM MHz MHz A 525.300 525.300 EQ EQ Standard -18dB Standard -18dB PUSH PUSH PUSH Stereo Tra
Краткое содержание страницы № 9
Product overview Overview of the displays After switch-on, the transmitter displays the standard display. PEAK PEAK B.Ch: 5.14 **2050** 0 0 -10 -10 MHz 552.300 -20 -20 -30 -30 EQ -40 -40 Standard -18dB AF I AF II ! % " # 28 Display Meaning Audio level Modulation of the left (AF I) and right “AF I” and “AF II” (AF II) audio channel with peak hold (Audio Frequency) function When the transmitter is overmodulated frequently or for extended periods of time, the “PE
Краткое содержание страницы № 10
Putting the transmitter into operation Putting the transmitter into operation Setting up the transmitter on a flat surface Do not fit the device feet when mounting the transmitter into a 19" rack. Clean the base of the transmitter where you want to fix the device feet. Fit the device feet to the four corners of the transmitter. Place the transmitter on a flat, horizontal surface. Please note that the device feet can leave stains on delicate surfaces. Mounting the transmitter into a 19" rac
Краткое содержание страницы № 11
Putting the transmitter into operation Connecting and positioning a remote antenna Use a remote antenna when the transmitter position is not the best antenna position for optimum transmission. You can choose between two antennas (see “Accessories” on page 34): • A 2003 UHF passive directional broadband antenna • A 1031 passive omni-directional broadband antenna Use a low-attenuation 50-Ω cable to connect the antenna to the transmitter. If possible, use a short antenna cable and as little con
Краткое содержание страницы № 12
Putting the transmitter into operation • 2 BNC extension cables (screw-in BNC socket ' to BNC connector ), ' • 2 antenna holders , •4 screws, •2 washers , •2 nuts . 1 Guide the BNC connector of the BNC extension cable through the hole in the rack mount “ear” . Connect the BNC connector to the antenna output . ' Screw the antenna holder to the BNC socket ' using the supplied washer and nut . ' Secure the antenna holder to the rack mount “ear” of the transmitter using two of the supp
Краткое содержание страницы № 13
Putting the transmitter into operation Connect the rod antennas & to the two BNC sockets '. ' Connecting an audio source to the input sockets PUSH PUSH Stereo Trans FREQ RANGE-Dw Use a suitable cable to connect the output of the audio source (e.g. mixing console) to the IC 2099A-SR20x0 790-865 mHz ART NO 503841 DESIGNED AND MADE IN GERM SER NO 2518100095 ANT ¼” (6.3 mm) jack/XLR-3 combo socket BAL AF IN L (I) and/or BAL AF IN R (II) . BAL AF IN L(I) + 22dBu MAX R(II) RF OUT Adjust the
Краткое содержание страницы № 14
Putting the transmitter into operation Connect the output socket LOOP OUT BAL R(II) of transmitter A to the input socket BAL AF IN R(II) of transmitter B. Connect the output socket LOOP OUT BAL R(II) of transmitter B to the input socket BAL AF IN R(II) of transmitter C. Repeat for the other transmitters. The AF output sockets LOOP OUT BAL L(I) and/or LOOP OUT BAL R(II) will work only when the transmitter is switched on and powered. Connecting devices to the output sockets Stere
Краткое содержание страницы № 15
Using the transmitter Pass the mains cable through the cable grip . Connect the mains cable to the mains socket . B 100 - 240V 50/60Hz 0.2 A ETHERNET RJ-45 Plug the mains plug into the wall socket. Using the transmitter To establish a transmission link, proceed as follows: 1. Switch the transmitter on (see next section). 2. Switch the EK 2000 IEM receiver on (see the instruction manual of the receiver). The transmission link is established. It is vital to observe the notes on frequen
Краткое содержание страницы № 16
Using the transmitter Press the jog dial. The transmission icon is displayed again. To switch the transmitter to standby mode: If necessary, deactivate the lock mode (see page 14) Keep the STANDBY button pressed until “OFF” appears on the display panel. The transmitter switches to standby mode. When in the operating menu, pressing the STANDBY button will cancel your entry (ESC function) and return you to the standard display. The STANDBY button is backlit in red both during operati
Краткое содержание страницы № 17
Using the transmitter Press the jog dial. The RF signal is deactivated. The transmission icon is not displayed. In addition, the display backlighting changes from orange to red and “RF Mute” flashes in alternation with the standard display. To activate the RF signal: Press the STANDBY button. “RF Mute Off?” appears on the display pane. Press the jog dial. The RF signal is activated and the transmission icon is displayed. The display backlighting changes from red to orange. To deactivate
Краткое содержание страницы № 18
Using the transmitter When carrying out the Sync function, the transmitter’s current frequency bank and channel setting as well as the receiver parameters adjusted via the “Sync Settings” submenu (see page 27) are transferred to the EK 2000 IEM receiver via the infra-red interface. Carrying out an Easy Setup Sync or a Sync function The following assumes that you are using the Easy Setup Sync function for setting up a multi- channel system. You can also use the Easy Setup Sync function for establ
Краткое содержание страницы № 19
Using the transmitter Easy Setup Sync Sync The first unused frequency preset is The current frequency bank and channel transferred from the receiver to the setting as well as the parameters transmitter. adjusted via the “Sync Settings” menu item are transferred from the transmitter When the transfer is completed, the to the receiver. display panel of the transmitter displays the numbers of the transferred When the transfer is completed, “ ” frequency bank and channel. appears on the display pane
Краткое содержание страницы № 20
Using the operating menu Using the operating menu A special feature of the Sennheiser 2000 series is the consistent, intuitive menu structure of transmitters and receivers. As a result, adjustments to the settings can be made quickly – even in stressful situations, for example on stage or during a live show or presentation. The buttons Button Function of the button Press the STANDBY button • Switches the transmitter on and off • Cancels the entry and returns to the standard display (ESC functio
